1. Bending strength, internal bond and hardness of all polystyrene treated particleboards were improved.

2. Additive for controlling flexural bond strength, air entrainement and workability of mortar cement

3. Admix 500 is used to increase tensile, bond, and flexural strength of approved products

4. • Improve adhesive bonding: A thin phosphoric acid or chromic Anodize improves bond strength and durability

5. Increasing the thickness of the adhesive layer had no significant influence on tensile bond strength.

6. Average bond strength of the experimental bracket adhesive and the conventional etchant was 8.96 MPa.

7. Flatwise tensile testing is used to measure bond strength of adhesives according to ASTM C297-61.

8. The valence bond angles are determined from the conditions of maxima of the “total bonds strength”.

9. The collecting guide elevation within the bath is adjustable to vary the strength of the severable bond.

10. The adhesive provides suitable bond strength on low basis weight substrates and allows for flexible processing conditions.

11. In reality, methane has four bonds of equivalent strength separated by the tetrahedral bond angle of 109.5°.

12. Similarly, the strength of a marriage bond is not solely defined during peaceful moments of romantic calm.

13. Flakeboards were tested for internal bond strength, thickness swell, modulus of elasticity, modulus of rupture, and breaking strength in bending, after two severe accelerated aging tests.

14. • Develop faster curing adhesives for appearance products, with a method to evaluate bond strength before curing is complete.

15. Adhesion strength was found to be significant, suggesting that the bond can support important forces prior to dissociation.

16. Shear bond strength was tested after bracket bonding, and the Adhesive Remnant Index (ARI) scores were quantified after debonding.

17. Strong Acids and strong bases (Opens a modal) Acid strength, anion size, and bond energy (Opens a modal) Practice

18. In the case of adhesive bond compositions which consistently yielded apparent adhesional failure an unexpected correlation was noted between butt-joint strength and the bulk tensile strength of the adhesive.

19. ¾ Use either premixed key coat or system without bond Coatuse either premixed key coat or system without bond coat RenderRender ¾ Higher earlyHigher early bondbond (not compressive)(not compressive) strength (e.g

20. Bond touch bracelet cheap Bond & co Bond & co dog apparel Bond & co dog collar james Bond

21. There is no comparison to Stay-Form’s strength when forming Bulkheads, as test reports prove that Stay-Form provides a 21% greater shear bond strength to concrete compared to other materials.

22. Advantages of Anodic bonding over other Substrate bonding techniques is the low pressure, hermetic seal, and strength of the bond form

23. The strength of an adhesive bond depends among other things on the physicochemical properties of the adhered surfaces, adhesive and the joint.

24. Results from adhesive testing indicated adhesive blends of quebracho extract and PRF resin failed to attain satisfactory bond strength at full cure.

25. 22 Good bond strength and high binding power , no environmental pollution with high temperature bonder, Good leak tightness for high temperature daub.

26. Shear bond strength was measured in accordance with the DIN 13990-2 standard governing test methods for the entire attachment–adhesive–enamel system.

27. An Adhesion test is used to determine the strength of the bond between the substrate and the coating, or between different coating layers

28. Cementation Navigation System The high strength of IPS e.max lithium disilicate offers dentists a choice to adhesively bond or conventionally cement their restorations

29. H-bond donors vs H-bond Acceptors

30. The difference in adhesive bond shear strength between untreated, intermediate and fully treated wood was less obvious in the case of the PUR adhesive.

31. Bond strengths decreased with increased degree of condensation (viscosity) of the adhesives. Shear strength based on radial penetration was higher than for tangential penetration.

32. The tensile bond strength of different orthodontic adhesives (Concise, Endur, Genie, Lee Bond, Lee Unique) to acid etched bovine enamel as well as to mesh pad — metal brackets was tested by 1040 tear-off experiments in each case.

33. There are single, double, and triple Bonds. See also covalent Bond, ionic Bond, metallic Bond.

34. The bond strength results obtained in the shear test recommend the new material as a bracket adhesive to be used with orthophosphoric acid for etching.

35. These reinforcements have been made possible due to the advances in bonding technology, the low alkali environment and the inherent bond strength of polymer concretes.

36. For all tested adhesives and closed assembly times, the shear test showed high wood failure percentages and bond strength values that compare to solid ash.

37. Generally, evaluating whether a bond is an Arbitrage bond

38. A Covalent bond may also be termed a molecular bond

39. The Bond films glorify the sometimes chauvinistic persona of Bond.

40. Bond Radius

41. The purpose of this in vitro study is to compare the shear bond strength of various esthetic brackets used in conjunction with two different adhesive systems.

42. Bond : Bond selling at a price less than its par value.

43. The Convexity of Bond 1 is 226.61 and 275.49 for Bond 2

44. A Bond servant is a Bond servant because they've been bought

45. Consolidated Mortgage Bond: A bond that consolidates the issues of multiple properties

46. Triple Covalent Bond A Triple Covalent Bond is a bond that involves 3 shared pairs of electrons (6 e- ) 12

47. These include tensile strength, wet and dry tear strength, burst strength, air permeability, seal strength and integrity.

48. Key words: concrete, accelerated strength, tensile strength, admixtures, curing, splitting tensile strength, modulus of rupture, strength correlations.

49. The interest accrues (is added to the Bond) until the Bond reaches 30 years or you cash the Bond, whichever comes first

50. The aim is to improve the strength of an intermetallic bond between engine component made from an aluminium alloy and a reinforcing element made from austenitic cast iron.

51. After 24 h of storage, the shear bond strength (SBS) was measured using a Zwicki 1120 testing machine. The adhesive remnant index (ARI) was determined under 10× magnification.

52. Bondholder is a person who is the holder or owner of a government bond, mortgage bond, debenture, or other investment bond

53. Premium Bond A bond that is valued at more than its face amount.

54. Argos goes from strength to strength

55. The bond represents a debt that the bond issuer owes to the Bondholder

56. Bond indices are key barometers for the development of different bond market segments.

57. There is no bond that is stronger than a bond between two democracies.

58. Selected combinations of materials were used to create tooth–adhesive–bracket complexes to evaluate shear bond strength (SBS) and the adhesive remnant index (ARI) with regard to enamel sealing.

59. An Amortized bond is a bond with the principal amount – otherwise known as face value –regularly paid down over the life of the bond

60. High strength adhesives with impact peel strength

61. Acetylation did not interfere to any practical degree with the isocyanate resin, and all property values were enhanced by acetylation, particularly internal bond strength and resistance to thickness swell.

62. Agencies for bond subscriptions

63. My word is bond!

64. The Greek word for a bond is de·smosʹ (Lu 8:29), while synʹde·smos refers to a “uniting bond,” or “joint-bond.” —Eph 4:3, Int.

65. The treatment composition comprises an electron donor compound selected such that the dental restorative has a higher Adhesive Shear Bond Strength than a like method without said electron donor compound.

66. The term structure of interest of treasury bond does very important to bond pricing.

67. On the basis of building the concept system of flood insurance bond, this article expatiates the differences between the general bond and traditional reinsurance bond.

68. The bending strength of glulam depends on both board strength and finger joint strength.

69. The thermal stability of alkali metal bifluorides has been found to increase with increasing ionic radius of the cation, reflecting its correlation with the hydrogen bond strength in these compounds.

70. Bond relationships, influence of ring strain and other intramolecular interactions upon bond lengths and angles.

71. Covalent bond definition is - a chemical bond formed between atoms by the sharing of electrons.

72. When a Bond matures, the owner is paid the face value of the Bond

73. The total energy has been optimized with respect to the bond lengths and bond angles.

74. Convertible bond is a hybrid derivative security that has characters of both stock and bond.

75. In this hydrogen bond between water and ammonia, ammonia is the hydrogen bond Acceptor (shown in red), and water is the hydrogen bond donor.

76. We need to respond to strength with strength.

77. Therefore, by having the improved profile structure, the present invention can substantially increase the bond strength of the frame, facilitate LED adhesion and carry out LED heat dissipation more effectively.

78. Bondholder A person or company that owns a municipal or corporate bond. The bond represents a debt that the bond issuer owes to the Bondholder

79. Bond Community Health Center, Inc

80. That is Sa'helu, the bond.