1. Additive for controlling flexural bond strength, air entrainement and workability of mortar cement

2. • Improve adhesive bonding: A thin phosphoric acid or chromic Anodize improves bond strength and durability

3. Increasing the thickness of the adhesive layer had no significant influence on tensile bond strength.

4. Average bond strength of the experimental bracket adhesive and the conventional etchant was 8.96 MPa.

5. Flatwise tensile testing is used to measure bond strength of adhesives according to ASTM C297-61.

6. The adhesive provides suitable bond strength on low basis weight substrates and allows for flexible processing conditions.

7. • Develop faster curing adhesives for appearance products, with a method to evaluate bond strength before curing is complete.

8. Shear bond strength was tested after bracket bonding, and the Adhesive Remnant Index (ARI) scores were quantified after debonding.

9. Results from adhesive testing indicated adhesive blends of quebracho extract and PRF resin failed to attain satisfactory bond strength at full cure.

10. 22 Good bond strength and high binding power , no environmental pollution with high temperature bonder, Good leak tightness for high temperature daub.

11. Shear bond strength was measured in accordance with the DIN 13990-2 standard governing test methods for the entire attachment–adhesive–enamel system.

12. The bond strength results obtained in the shear test recommend the new material as a bracket adhesive to be used with orthophosphoric acid for etching.

13. These reinforcements have been made possible due to the advances in bonding technology, the low alkali environment and the inherent bond strength of polymer concretes.

14. For all tested adhesives and closed assembly times, the shear test showed high wood failure percentages and bond strength values that compare to solid ash.

15. The purpose of this in vitro study is to compare the shear bond strength of various esthetic brackets used in conjunction with two different adhesive systems.

16. Flakeboards were tested for internal bond strength, thickness swell, modulus of elasticity, modulus of rupture, and breaking strength in bending, after two severe accelerated aging tests.

17. After 24 h of storage, the shear bond strength (SBS) was measured using a Zwicki 1120 testing machine. The adhesive remnant index (ARI) was determined under 10× magnification.

18. Selected combinations of materials were used to create tooth–adhesive–bracket complexes to evaluate shear bond strength (SBS) and the adhesive remnant index (ARI) with regard to enamel sealing.

19. Acetylation did not interfere to any practical degree with the isocyanate resin, and all property values were enhanced by acetylation, particularly internal bond strength and resistance to thickness swell.

20. The treatment composition comprises an electron donor compound selected such that the dental restorative has a higher Adhesive Shear Bond Strength than a like method without said electron donor compound.

21. The thermal stability of alkali metal bifluorides has been found to increase with increasing ionic radius of the cation, reflecting its correlation with the hydrogen bond strength in these compounds.

22. Therefore, by having the improved profile structure, the present invention can substantially increase the bond strength of the frame, facilitate LED adhesion and carry out LED heat dissipation more effectively.

23. There is no comparison to Stay-Form’s strength when forming Bulkheads, as test reports prove that Stay-Form provides a 21% greater shear bond strength to concrete compared to other materials.

24. Due to the high proportion of wood failure, no clear effect of the different adhesives, but a clear effect of wood species on the bond strength was observed for lap joint samples.

25. Material and Method 2: In a second stage, tensile bond strength for the selected laser settings was determined in comparison to the conventional acid-etch technique for a further 210 teeth as the control group.

26. The use of the synthetic resin emulsion gives pressure-sensitive adhesives which are excellent in pressure-sensitive adhesion properties such as bond strength, cohesive force, and tack and can be easily swelled in water even without alkali treatment.

27. The tensile bond strength of different orthodontic adhesives (Concise, Endur, Genie, Lee Bond, Lee Unique) to acid etched bovine enamel as well as to mesh pad — metal brackets was tested by 1040 tear-off experiments in each case.

28. According to the present invention, the toughness and abrasion resistance of materials can be remarkably improved and characteristics thereof can be controlled by reinforcing interfacial bond strength in a microstructure of a TiC-based or Ti(C,N)-based cermet.

29. The coating formulation of the present invention enables manufacture of a porous nano antireflection film with high transmission following a more streamlined process than the prior art, obtaining an antireflection film with a high adhesive force between the film and substrate, and high durability by increasing particle-particle bonding and the bond strength between particles and substrate.