vertical plane in Vietnamese
Mặt phẵng đứng
Sentence patterns related to "vertical plane"
1. area forward of the fore vertical plane or abaft the aft vertical plane bounding the part of cargo area below deck
2. vertical plane parallel to vehicle's longitudinal centreline through the line defined in (c) above;
3. one traverse vertical plane through the outermost point of the front of the vehicle-cab
4. — one traverse vertical plane through the outermost point of the front of the vehicle-cab
5. Coronal: A Coronal plane through the body is a vertical plane from head to foot and parallel to the shoulders.
6. It also had a balancing mechanism contrived from two arching tubes at right angles to one another in a vertical plane.
7. The driver's upper arms shall be adjacent to the torso with the centrelines as close to a vertical plane as possible.
8. The driver's upper arms shall be adjacent to the torso with the centrelines as close to a vertical plane as possible
9. 2.2.1. The driver’s upper arms shall be adjacent to the torso with the centrelines as close to a vertical plane as possible.
10. Already slight deviations are enough to drive the image into gray and to falsify color fidelity, in particular on the vertical plane.
11. The driver's upper arms shall be adjacent to the torso with the centre-lines as close to a vertical plane as possible.
12. Commissure There was moderate degree of residual leakage at two Commissures (instead of one) of die tri-leaflet left atrioventricular valve (vertical plane of left ventricle)
13. P#-a vertical plane passing through the O point and forming an angle of #o to the left of the median longitudinal plane of the vehicle
14. An Actinomorphic flower is a flower that can be divided into three or more identical sectors along any diameter or any vertical plane. Many flowers are Actinomorphic
15. The characteristic of the ANB angle in the sagittal vertical plane was graphically represented by determining both points A and B using two angles instead of one.
16. Two airscrews are mounted vertically at the front and rear of the body such as to be capable of rotating from a vertical plane into a horizontal plane.
17. The elevation angle is the angle between the horizontal plane and the line of sight, measured in the vertical plane. The Greek letter Epsilon (ε) describes the elevation angle.
18. The direction of impact shall be in the fore and aft vertical plane of the section of the vehicle to be tested. The tolerance for this direction is ± 2°.
19. The mixed convection flow due to a line thermal source embedded at the leading edge of an adiabatic vertical plane surface immersed in a saturated porous medium has been studied.
20. The Brachistochrone problem, which describes the curve that carries a particle under gravity in a vertical plane from one height to another in the shortest time, is one of the most famous studies in classical physics
21. Guide cheeks (5; 6) fitted with slides (8) and pivotable in the vertical plane of the flange (14) permit phase angles from 45 down to 15° in relation to the side surface of the workpiece (10).
22. A hollow axle stub (3) is arranged with a flange surface (5), which faces the coulter carrier (4), at an angle with respect to the vertical plane of the axis of rotation (6) of the hollow axle stub.
23. In order to increase the retaining force in the housing (1), the front faces (21) of the supporting bodies (13) are outwardly slanted in the plug-in direction against the vertical plane in the region where they abut on the inner edge (22).
24. In order to increase the retaining forces, the end faces (21) in the region of the abutment in the plug-in direction are bevelled outwards towards the vertical plane by an angle $g(a) of between 15° and 60°, preferably of between 25° and 45°.
25. The measurements were taken as follows: wing length, from the carpal joint to the tip of the longest primary; tarsus length, from the tibiotarsal joint to the distal undivided scute; upper mandible length, the chord length from the point where the Culmen enters the feathers of the head to the tip; bill depth, in the vertical plane level at the anterior edge of the nares.