1. Subsystem: Conventional rolling stock

2. b) railway rolling stock

3. Investment in Rolling Stock

4. * adequate and clean rolling stock as well as timely provision of rolling stock (optional)

5. Absorber chamber test

6. CROSS ACCEPTANCE OF ROLLING STOCK

7. The railroads needed them to keep their rolling stock rolling.

8. 4.1. Absorber chamber test

9. — rolling stock, infrastructure and the environment.

10. Cross-community acceptance of rolling stock

11. Characteristics to be activated by rolling stock

12. Track-side train detection systems shall have the characteristics necessary to be activated by rolling stock which conforms to the rolling stock TSI.

13. absorber chamber test according ISO #-#, second edition

14. Absorber chamber test: according to ISO DIS

15. Bygone Wagons 3d Printed representations of UK rolling stock

16. Justification Constructive approval for rolling stock cannot be accepted.

17. Exterior doors: access to and egress from Rolling stock

18. The cross acceptance of rolling stock in the EU

19. Rolling stock with Class A and Class B equipment

20. b) To contribute to the modernization of rolling stock

21. Such a test can be performed in an altitude environmental test chamber;

22. Subject: Communication on noise abatement measures for existing rolling stock

23. Double sets of wheels pull together like centipede rolling stock.

24. Exhibits include a widely representative collection of railway rolling stock.

25. TSI Rolling Stock HS: Actual no requirement specified in section

26. - the legislative proposal relating to cross-acceptance of rolling stock;

27. (b) rolling stock as defined in point 2.1.2 of the Annex.

28. 8. Conditions for continuing running after an accident involving rolling stock

29. All Keihin-Tohoku Line rolling stock is based at Urawa Depot.

30. Rolling stock with train protection Class A and Class B equipment

31. The post - war years witnessed a dire shortage of rolling stock .

32. The Rolling Stock Department shall determine Ei and Ea taking into account:

33. — ‘Operation Category 3’ for Category B passenger rolling stock (including passenger locomotive).

34. New rolling stock has also progressively came on line, replacing older vehicles.

35. Digital installation, locomotive & rolling stock modification and model railway layout construction, etc.

36. (i) the rolling stock TSI defines the braking performance of interoperable trains;

37. Absorber chamber test according ISO 11452-2, second edition 2004;

38. — Absorber chamber test: according to ISO DIS 11452-2: 2003

39. absorber chamber test according ISO 11452-2, second edition 2004;

40. The above test shall be made in an anechoic chamber.

41. These interfaces shall be adaptable for rolling stock operating in multiple units.

42. Railway applications — Air conditioning for main line rolling stock — Part 2: Type tests

43. End cock for the air line of a rolling stock for railway transport

44. Absorber chamber test according to ISO 11452-2, second edition 2004;

45. 1.2.3.7 The above test shall be made in an anechoic chamber.

46. This might actually be a way out of the test chamber.

47. (3) The combined effect of train speed and air speed causes an aerodynamic rolling moment that can affect the stability of rolling stock.

48. Costs relating to the supply of rolling stock actually accounted for only about 15 %.

49. A ￡300 million contract to build rolling stock has been won by GEC-Alsthom.

50. Stock solutions should preferably be prepared by dissolving the test substance in test medium.

51. Method for adjusting a state of a rolling stock, particularly a near-net strip

52. Method for heat treating a rolling stock made of a heat-treatable aluminum alloy

53. Atlas manufactures a wide variety of HO scale locomotives, rolling stock, track and accessories.

54. Many stations needed repairs or rebuilding and there was a shortage of rolling stock.

55. Railway applications — Air conditioning for main line rolling stock — Comfort parameters and type tests

56. A common procedure should be established for mutual acceptance of in-use rolling stock.

57. wagons authorised to run under ss conditions (see annex B of rolling stock STI

58. wagons authorised to run under ‘ss’ conditions (see annex B of Rolling Stock TSI)

59. The acoustic enclosure (16) receives the airflow from the test chamber (14).

60. If the test is made in an anechoic chamber, the chamber shall be large enough to ensure normal dispersal of the heat released by the warning device during the test.

61. Requirements for vehicle acceptance are set out in the CR and HS rolling stock TSIs.

62. The yard was a desert of flint chips and rolling stock that was almost extinct.

63. For example, we test the rolling resistance under load, abrasion resistance and shock strength.

64. Annual Capital Investment By Type of Asset 1994-2003 Railroad Rolling Stock Manufacturing (NAICS 3365)

65. Accumulated Capital Investment By Type of Asset 1994-2003 Railroad Rolling Stock Manufacturing (NAICS 3365)

66. Bombardier Transportation was a Canadian rolling stock and rail transport manufacturer, headquartered in Berlin, Germany.

67. Billets are further processed via profile rolling and drawing.Final products include bar stock and wire.

68. Railway applications - Electric equipment for rolling stock - Part electrotechnical components - Rules for AC circuit - breakers.

69. An analyte measurement system is provided having sensors with embossed test chamber channels.

70. A majority of rolling stock manufactures also considered they would have adequate alternatives even post-Transaction.

71. Document check (certificates of interoperability constituents and possible integration methods checked against characteristics of rolling stock)

72. In contrast to similar services in France and Germany, Intercity rolling stock is very rarely idle.

73. Insurance obligations which cover all damage to or loss of land vehicles (including railway rolling stock).

74. Railway applications - Electric equipment for rolling stock - Part Electrotechnical components; Rules for d . c. circuit - breakers.

75. Expenses of impounding vessels, freight vehicles, rolling stock and aircraft may be charged to their owners.

76. (11) AHF is manufactured by rolling aluminium ingots or foil-stock up to the desired thickness.

77. For this rolling stock, the bogies are classified according to their adhesion coefficient μ on starting.

78. Constant temperature and humidity chamber for the reliability of industrial products Damp heat test.

79. New rolling stock, reopened lines and stations and more passengers testify to the extent of the exorcism.

80. The TSI on rolling stock prescribes train-borne systems for monitoring the temperature of their axle boxes