1. SF6-insulated load and power switchgear, air-insulated load and power switchgear

2. A load sharing, multi-module power supply system (400) for supplying power to a load.

3. Load protection system in a power modulator

4. Power amplifier insensitive to load impedance changes

5. NO-LOAD POWER CONSUMPTION AND AVERAGE ACTIVE EFFICIENCY

6. Circuit for transmitting an amplified resonant power to load

7. Ac load soft start for variable frequency power source

8. Data carrier with load modulation means and with improved power supply in the process of load modulation

9. Power grid is weak in 3N areas, wind power is far away from load center.

10. Disclosed is a power amplifier insensitive to load impedance changes.

11. An efficient bulb may lighten the load of power stations.

12. Demand - side management DSM can improve power grid load property.

13. Maintenance Bypass (path): Alternative power path provided to maintain continuity of load power during maintenance activities.

14. Power inverter apparatus using the load transformer of an ac power line to insert series compensation

15. Power and load absorbed by the dynamometer at 80 km/h

16. Electric power ergograph is a load or device of absorbing power, which mainly is used of measuring power for middling torque.

17. Load balancing of several independently working modules of a power supply installation

18. System and method for load sharing in multi-module power supply systems

19. When the relay is energised, power is supplied to an electrical load.

20. FuIl-AC load flow constitutes a core computation in power system analysis.

21. Load forecast is the foundation of power system operating dependably and economically.

22. The invention relates to an advanced electronic power regulator for regulating the AC power fed in a load.

23. The power absorbed by fixed equipment under no load may be determined and added to the power measured.

24. A balance load is connectable across the power circuit when the power circuit is disconnected from the coils.

25. A load control device is directly connected to a power utility line carrying electrical power using alternating current (AC) and to a load provided by a device located at premises.

26. It has exceedingly high water retentivity and exceedingly high absorbing power under load.

27. An Advanced Mezzanine Card involving module management controller MMC, load circuit and load power enable circuit is disclosed at the same time.

28. Ac power consumption of the low-voltage dc source with no load (PS).

29. Power inverter circuit for adjusting symmetry of the ac-voltage without load-coupling

30. Stand-by power: in a state of emergency, changes in the work load of the emergency power to run. Alternatperformance.

31. Wireless power receiving apparatus capable of improving efficiency and power delivery using modulation of effective load resistance of receiving end

32. Methods and apparatus for load sharing between parallel inverters in an ac power supply

33. DC capacitor relies on the pulsation of DC voltage, power, inductance side, and load.

34. Bugera PS1 Passive 100-watt Power Attenuatorhttps://imp.i114863.net/OML6A Rivera RockCrusher Power Attenuator/Load Box for Ampshttps://imp.i114863.net/3vMVv

35. The alternator produces power to overcome the load which is connected to the alternator.

36. Bussed gutters are an economic choice for distributing primary power to multiple secondary load applications.

37. Another AC output of the DC/AC inverter is available to provide power to a load.

38. For example, at 63% speed a motor load consumes only 25% of its full-speed power.

39. Apparent power is taken into account when designing and operating power systems, because although the current associated with reactive power does no work at the load, it still must be supplied by the power source.

40. A current limiting device for connection in use between an AC mains power source and a load.

41. With output power reduced under load mismatch conditions, signal distortion levels may be reduced to acceptable levels.

42. Brownouts are intentionally caused by electric power supply companies to reduce load during a state of emergency

43. Methods and apparatus are disclosed for achieving load balance between parallel inverters in an AC power supply.

44. Ac power consumption of the low-voltage dc source with the UUT as the load (PL); and

45. The load of a transformer is the power in kVA or volt-amperes supplied by the transformer.

46. Stand-by power:in a state of emergency, changes in the work load of the emergency power to run.

47. A method for the dynamic load-balancing of series- and/or parallel-wired power semiconductor circuits (S¿1?...

48. Feedback modifies the output when the adders determine the power applied to the load (12) in real time.

49. The GFCI device includes line and neutral conductors configured to connect an AC power source and a load.

50. Add Biz Powder to every load to boost the cleaning power of your detergent and eliminate tough stains

51. The slip clutch sets a threshold for how much load the power plant can absorb from the waves.

52. 1 Overview 2 Lore 3 The Cannibal's Perks 4 Load-out 4.1 Weapon: The Sledge 4.2 Power: Bubba…

53. • sediment load – suspended and bed load

54. "Ageing cycle" means the machine or engine operation (speed, load, power) to be executed during the service accumulation period;

55. ‘Ageing cycle’ means the machine or engine operation (speed, load, power) to be executed during the service accumulation period.

56. "Ageing cycle" means the machine or engine operation (speed, load, power) to be executed during the service accumulation period;"

57. ‘ageing cycle’ means the vehicle or engine operation (speed, load, power) to be executed during the service accumulation period;

58. Need to add load to or extend power from an existing distribution system? Busway systems may be the answer

59. "Ageing cycle" means the vehicle or engine operation (speed, load, power) to be executed during the service accumulation period;

60. There are broadly two categories of coal based Thermal power plants: (i) Pit Head based plants, which are situated near coal Mines and (ii) Load centre based plants situated near load centres.

61. A Contactor is a large relay, usually used to switch current to an electric motor or another high-power load

62. According to the present invention, the power amplifier comprises: a power amplification circuit which amplifies an input signal; an output matching circuit which is connected to an output end of the power amplification circuit, and performs impedance matching between the power amplification circuit and an antenna load; and a four-port coupler which is connected between the output matching circuit and the antenna load.

63. Photosensor circuits include a relay coil configured to control application of an alternating current (AC) power source to a load.

64. Equipment management is discussed as summer load culminate . It is important of backup generators for critical sites during power outage.

65. The latching relay conducts current from the AC power source to the electrical load after the inrush current has subsided.

66. The longer the switch is on compared to the off periods, the higher the total power supplied to the load.

67. Low SWaP Payload (Size/Weight and Power) translate into increased useful load, increased safety and support for small light Aerostats.

68. Device and method for compensating for the power of an electric load of a vehicle using a high-capacity capacitor

69. Steady base-load electricity sources will always be needed, and solar and wind power can only act as useful supplements.

70. The circuit includes a relay (44) having contacts (52) connected in series between an AC power source and the load (72).

71. The short circuit current of large load center that excesses the regulation standard seriously endangers security and stability of power grid.

72. In the interruptible load management(ILM) of power systems, customers' shortage cost could be significantly reduced by early notification of curtailment.

73. System Load

74. The principal purpose of an Ats is to ensure the continuous delivery of electrical power from one of two power sources to a connected load circuit (electrical equipment – lights, motors, computers, etc.).

75. 16 The float plate glass production line is the first level load of power supply. The power supply reliability affects seriously the normal operation and the economic efficiency of the production line.

76. Impact and short duration load variations not affecting load adjustment

77. Circuit arrangement and method for adjusting the power input of a load which can be operated on a direct current supply network

78. Choose from a selection of load limiters and retractable load Arrestors with load capacities ranging from 550 lb to

79. Relay valve for variable load and automatic empty-load change-over

80. Relay valve for variable load/Automatic empty-load change over brake