1. Low-density polyethylene- LDPE: Still based on polyethylene, LDPE is difficult to Biodegrade

2. Polyethylene adhesive tape release liners

3. High pressure Low Density Polyethylene Gas compressor lubricant.

4. Polyethylene – Apron resists liquids, grease and oils

5. Flame-retardant surface protection adhesive tape having polyethylene backing

6. The engineer pulled a polyethylene bag from his drawer.

7. Polyethylene naphthalate monofilaments resistant to fibrillation and abrasion

8. The samples are collected in perforated polyethylene bags.

9. Polyethylene footfall sound insulation material, films and mats

10. All polyethylene liners were gamma irradiated in air.

11. Polyethylene is an excellent barrier to water vapor.

12. Evacuatable resealable storage bag made of nylon and polyethylene with a valve made of polyethylene and a closure system made of ABS plastic

13. Plastics. Reticulate polyethylene pipes for pipelines under pressure. Specifications.

14. CONTINUUM™ Bimodal Polyethylene Resins are strong like that

15. The bags are sterilized and made of heavy - duty polyethylene.

16. In Poland, above-water polyethylene pipes must be thermally insulated

17. The term polyethylene glycol may be encountered in some formulations.

18. Cistern Tanks are manufactured from Food Grade FDA approved Virgin Polyethylene Resin

19. Polyethylene bottles, # ml, for transferring the exposed absorption solutions to the laboratory

20. The steel elbow is used as the base stock for polyethylene coating elbow and no-interface circular polyethylene material is coated to the outside of steel elbow.

21. The method for producing the impact modifier composition comprises the steps of (1) selecting high-density polyethylene in a powder form; (2) selecting chlorinated polyethylene in a powder form; (3) uniformly admixing said high-density polyethylene and said chlorinated polyethylene; and (4) thereby producing said impact modifier composition, wherein said impact modifier composition comprises (a) less than 30 percent by weight of high-density polyethylene based on the total weight of the impact modifier composition, based on the weight of impact modifier composition; and (b) at least 70 percent by weight of chlorinated polyethylene, based on the weight of the impact modifier composition.

22. The Barrels are constructed of recycled, UV inhibited BPA free polyethylene

23. Iridescent film of polyester, polyethylene and an ethylene-vinyl acetate copolymer

24. The polymer may include polyvinyl alcohol, polyethylene glycol, and rice starch.

25. Method for butt welding cross-linked polyethylene pipes (pe-x pipes)

26. Burmester also included a few samples contaminated with polyethylene glycol, a modern preservative.

27. Safety Polyethylene Barricades Direct Traffic Flow and Cordon Off Hazards or Construction

28. Tall ( low ) press polyethylene ( filmy class ), some areas rise nearly 1000 yuan.

29. Three common polymeric Adipates are polyethylene adipate, polypropylene adipate, and polybutylene adipate

30. Made out of polyethylene resistant to acids and alkalis, easy to clean.

31. There was significant polyethylene wear and osteolysis associated with the acetabular cup .

32. Recycling also saves 8 tons of oil for every ton of polyethylene.

33. Polyethylene bottles, 100 ml, for transferring the exposed absorption solutions to the laboratory.

34. It is designed to fit to different valve systems via a polyethylene adaptor.

35. Type 1 (polyethylene terephthalate) is commonly found in soft drink and water bottles.

36. Polyvinylchloride (PVC), Polyethylene (PE), and Polychlorotrifluoroethylene (PCTFE) blister sealed with an aluminum foil

37. Adhesive composition comprising tannin, polyethylene glycol, and water, lower alcohol or mixture thereof

38. Install a layer of tarpaper or polyethylene plastic before installing the new boards.

39. Safety polyethylene Barricades are compact in design and are forkliftable for ease-of-transport.

40. The simplest form of Alkene, ethene is used to produce polyethylene, ethylene and ethanol

41. The invention may also include polyethylene glycol, an alkali metal bicarbonate salt, and xylitol.

42. Polyethylene, containing by weight 35 % or more but not more than 45 % of mica

43. Vinyl, nylon, and Lucite. are markedly inferior to Teflon, polystyrene, polyethylene, sapphire, or quartz.

44. Peter Haddon of Granta thinks one of the small polyethylene kayaks would be comparable.

45. — || a third layer containing a mixture of low density polyethylene, titanium dioxide and additives,

46. Adsorbed permethrin was not easily desorbed from polyethylene and polyvinylchloride by several water rinses.

47. a third layer containing a mixture of low density polyethylene, titanium dioxide and additives,

48. The article may be untreated polyethylene, polypropylene, PET, or acrylonitrile, Heat is applied to the support portion 12 while the transfer portion 14 is placed into contact with the untreated polyethylene, polypropylene, or acrylonitrile article.

49. The process entails coextrudiing the normally tacky amorphous propylene copolymer with a low viscosity polyolefin such as a polyethylene wax forming a core of amorphous propylene copolymer covered with a sheath of polyethylene wax.

50. — a third layer containing a mixture of low density polyethylene, titanium dioxide and additives,

51. — a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment,

52. 27 The crystallinity of polyethylene decreased with increase of content of short branched chain methyl.

53. Packed in sealed polyethylene bags and a separate inner-case poly-bag liner, these Bouffant…

54. Polyesters, in primary forms (excluding polyacetals, polyethers, epoxide resins, polycarbonates, alkyd resins, polyethylene terephthalate, other unsaturated polyesters)

55. Process for separation and recovery of polyethylene glycol (peg) from spent aqueous two-phase systems

56. An electric cable comprises a polyethylene sheath bonded to a metallic shield by an adhesive.

57. Polyethylene terephthalate, commonly referred to as PET, for instance, has a resin code of 1.

58. Here, we report a separator made by coating Boehmite (AlOOH) particles on microporous polyethylene (PE) membranes

59. We also offer our SinkFast® disposable groundwater Bailer, which contains both PVC & polyethylene components

60. The polyethylene in direct contact to the bone adjusts to the deformation of the pelvis (Isoelasticity).

61. a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment,

62. covered on the metallised side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer

63. — || a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment,

64. 11 Polyethylene glycol unsaturated carboxylic esterified macromer; Polycarboxylic acid type water-reducer; Molecular designing; High performance.

65. In high-density polyethylene (HDPE) and in ultradrawn ultrahigh molecular weight polyethylene (UHMWPE) fibers, the changes in the 13C−13C dipolar couplings brought about by the reorientations of the 13C−13C internuclear vectors in the Crystallites were observed

66. Use this Barbed Micro-Valve with 1/4" Polyethylene Micro Tubing and 1/4" Soaker Dripline

67. Clingfilm is either made from PVC or low density polyethylene that’s treated to make it stretch

68. Made of heavy-duty polyethylene, these Chocks can resist damage, dents, and scratches from weather, debris

69. Method and plant for the recovery of terephthalic acid and ethylene glycol from polyethylene terephthalate wastes

70. Non - Congruent - all - polyethylene were inserted into a validated finite element model of a proximal tibia.

71. Unsaturated polyesters, in primary forms (excluding liquid polyesters, polyacetals, polyethers, epoxide resins, polycarbonates, alkyd resins, polyethylene terephthalate)

72. First-grade wooden parquet floors laid on polyethylene sheets for acoustic insulation in the first floor bathrooms.

73. This material has a Brushed face and is composed of two sheets of aluminum with a reinforced polyethylene core.

74. Adhesive will typically be formed of substances such as gelatine, epoxy, resin or polyethylene, with each having different variations

75. With 1–3° of malalignment, tribocontact areas were located at untypical polyethylene zones, but still showed abrasive wear only.

76. As far as the method is concerned, this additive may be produced in particular by grinding in polyethylene glycol.

77. Containers, vats, receptacles and tanks of concrete and polyethylene for the recovery and storage of river water

78. 30 Non - Congruent - all - polyethylene were inserted into a validated finite element model of a proximal tibia.

79. Wrap the item in unbleached muslin or acid-free tissue paper and place in a polyethylene plastic bag.

80. In low density polyethylene the transient charging currents are studied after the application of a step function voltage.