1. The air bridge is fabricated using conventional photolithography, ion-beam dry etching, and selective wet etching.

2. An Aligner, or mask Aligner, is a system that produces integrated circuits (IC) using the photolithography process

3. 3D materials can be fabricated using a lot of methods like two-photon photolithography, interference lithography and molding.

4. However, they cannot be prepared by using sophisticated fabrication methods like two-photon and interference photolithography as mentioned before.

5. According to the semi-conductor industry, the operation of PFOS based photo acid generators (PAGs) is critical to the semiconductor industry in the photolithography process

6. According to the semi-conductor industry, the operation of PFOS based photo acid generators (PAGs) is critical to the semiconductor industry in the photolithography process.

7. It is used as a basic solvent in the development of acidic photoresist in the photolithography process, and is highly effective in stripping photoresist.

8. The aforementioned technique solves the problem associated with current techniques (photolithography, dry etching) which require the use of acids or solvents during the process, said products seriously affecting the organic layers below the cathode.

9. Measuring apparatus and instruments, namely UV intensity meters and UV actino meters, all aforementioned goods for use in or as accessories to photolithography and UV curing systems (not for use in or with cameras)