1. Headrest position adjustment device and headrest position adjustment method

2. Position adjustment amount

3. Steering wheel position adjustment device

4. Screw position adjustment device for injection molding machine

5. Use of correct number and position of nozzles; adjustment of water pressure.

6. Pneumatic actuating drive comprising an integrated electropneumatic position adjustment

7. The position adjustment elements are for adjusting the relative position of the first member and the second member.

8. Set the seat cushion position to the adjustment position recorded in accordance with paragraph 5.13 of this Annex.

9. Wireless charger capable of automatic position adjustment and charging method using same

10. But there's plenty of seat adjustment and the driving position is faultless.

11. Touchscreen-based method and device for knob-position parameter adjustment

12. Adjustment definition, the act of adjusting; adaptation to a particular condition, position, or purpose

13. the longitudinal adjustment is fixed one notch or 10 mm rearward of the most forward normal driving position or position of use as indicated by the manufacturer (for seats with independent vertical adjustment, the cushion shall be placed in its highest position);

14. The longitudinal adjustment is fixed one notch or 10 mm rearward of the most forward normal driving position or position of use as indicated by the manufacturer (for seats with independent vertical adjustment, the cushion shall be placed in its highest position);

15. — the longitudinal adjustment is fixed one notch or 10 mm rearward of the most forward normal driving position or position of use as indicated by the manufacturer (for seats with independent vertical adjustment, the cushion shall be placed in its highest position);

16. Tighten the adjustment nut of the elbow with the lower arm in a horizontal position.

17. Tighten the adjustment nuts of the shoulder with the upper arm in a horizontal position.

18. Tighten the adjustment nut of the elbow with the lower arm in a horizontal position

19. Tighten the adjustment nuts of the shoulder with the upper arm in a horizontal position

20. Collimation is the adjustment of the position and orientation of the optical elements to achieve best performance

21. Said knob can be brought into a working position for functional adjustment purposes.

22. Arrangement in wood sawing relating to measuring, data transfer and adjustment of position of a saw blade

23. 4.6.3. Tighten the adjustment nuts of the shoulder with the upper arm in a horizontal position.

24. The longitudinal adjustment shall be secured one notch or # mm in front of the rearmost possible position of use specified by the manufacturer (for seats with independent vertical adjustment, the cushion shall be placed to its lowest possible position

25. Clitoral stimulation during missionary position isn’t impossible, however—it just takes a little adjustment

26. In this manner easy and accurate adjustment of the axial position of the cam follower wheels is achieved.

27. The longitudinal adjustment shall be secured one notch or 10 mm in front of the rearmost possible position of use specified by the manufacturer (for seats with independent vertical adjustment, the cushion shall be placed to its lowest possible position).

28. Adjustable head restraints for the front centre and rear outboard seating positions must lock at the highest position of adjustment above # mm, if this position exists

29. The adjustment strip (9') is correspondingly wedge-shaped and has a position adjustable means (16).

30. The long-reach wavelength division multiplexing passive optical networks by using the position adjustment of broadband light source

31. Record the adjustment of the SCRP position modify the manikin H-point and WS50M H-point coordinates accordingly.

32. The throttle lever (4) is biased toward an idling position within an output adjustment rage of the engine.

33. In the process, the PCB motor is actuated by the electronics system of the switchgear until the position of the adjustment potentiometer or of the adjustment switch corresponds to the new value.

34. Adjustable head restraints for the front centre and rear outboard seating positions must lock at the highest position of adjustment above 750 mm, if this position exists.

35. Position adjustment device for slats, slatted frame comprising such device and bed comprising such slagged frame

36. To install the rack (6) on the sliding door (1), the pinion (7) can be placed into an adjustment position located below the working position.

37. A coarse and fine adjustment method is used to improve the accuracy of establishing the head at the reference position.

38. On-load tap changer and a method for the emergency adjustment of a defined switching position of an on-load tap changer

39. The adjustment is transferred to the sleeve (2) so that the angular position of the optical component (1) can be altered.

40. Description of principle of adjustment through main adjustment points

41. A resulting target adjustment speed (ω*) is put to an adjustment unit (14), by way of which the position of the loop lifter (3) is adjusted, with the first and second target adjustment speed portions (ω1*, ω2*) being included in said speed as addends.

42. When measured in accordance with paragraph # the top of a head restraint located in the front centre designated seating position shall have a height not less than # mm in any position of adjustment

43. The prop includes means (30, 32, 34) for controlled adjustment of the position of the base plate relative to the ground engaging means.

44. The top of a head restraint located in the front centre designated seating position shall have a height not less than # mm in any position of adjustment, except as provided for in paragraph # of this Regulation

45. When measured in accordance with paragraph 7.1.1., the top of a head restraint located in the front centre designated seating position shall have a height not less than 750 mm in any position of adjustment.

46. Adjustment of joints

47. ADJUSTMENT OF JOINTS

48. Description : Adjustment of prestressing arises and relaxation, adjustment of hardness while rolling.

49. A wind turbine includes a blade position adjustment system providing for continued wind turbine blade repositioning operation even after the occurrence of certain faults.

50. Adjustment of deductions

51. We are not in a position to meet these costs of adjustment unless these are fully covered by transfers of finance and technology from developed countries.

52. Tighten the bolt and adjustment nut through the head and the Atlas-Axis block with the head in a horizontal position.

53. Tighten the bolt and adjustment nut through the head and the Atlas-Axis block with the head in a horizontal position

54. Adjustment of costing factors

55. ADJUSTMENT OF THE JOINTS

56. A processor (64) of the wireless sensor module is coupled to the motion or position sensor and the memory circuitry, where the processor is configured to retrieve the adjustment of the operating parameter from the memory circuitry upon detection of the defined motion or position by the motion or position sensor.

57. • Adjustment group codes • Claims Adjustment reason codes

58. An adjustment mechanism (304, 444) allows large scale adjustment of the jaw (456).

59. A distance between the eyepiece lens assembly and the display device is adjusted based on the focus adjustment responsive to the focus position.

60. Average of post adjustment multipliers.

61. Analysis of seasonal adjustment quality

62. Angle adjustment blocks of metal

63. Possible adjustment of the deductions

64. Number of idle adjustment points

65. Cost-of-living adjustment (Cola)

66. Additional motorized adjustment of the adjustment knob in remotely controllable electronics systems of industrial switchgear

67. Adjustment and transformation of vehicles

68. The adjustment device is used for cam shaft adjustments that change the angle position between the crank shaft and the cam shaft during operation of the engine.

69. The effects of Adjustment disorder …

70. Adjustment of the national quotas

71. Number of idle adjustment points: ...

72. Adjustment of pantograph contact force

73. — Adjustment of pantograph contact force

74. - control and adjustment of capacities,

75. Gamma curve adjustment method and gamma curve adjustment device

76. Number of main adjustment points: ...

77. Adjustment of cohesion policy envelopes

78. Adjustment of the power unit (130) can be made independently of adjustment of the cycle wheel (120).

79. Table # ost adjustment multiplier and cost-of-living adjustment for # to # by main duty station

80. Adjustment entries