peak recording level in Vietnamese

@Chuyên ngành kỹ thuật
-mức ghi đỉnh

Sentence patterns related to "peak recording level"

1. the peak level of single accelerating vehicle events.

2. Gasoline prices are 14% below the peak level they hit in November.

3. In addition, the expenditure peak in June 2006 was due to the recording of voluntary contributions in kind.

4. The antenna is substantially aligned when the signal strength reaches a peak level.

5. Thus, the microphone's signal needs an external amplification for an adequate recording level.

6. Heat acclimatization lowered the level of the second peak , though it was remarkably prolonged.

7. Elevation ranges from sea level to 1,168 m (3,832 ft) on El Toldo Peak.

Độ cao dao động từ mực nước biển đến 1.168 m (3.832 ft) tại đỉnh El Toldo.

8. Chlordiazepoxide is slowly absorbed and may take several hours to reach a peak plasma level

9. 16 The spectrum level of microseismic noise tends to peak at about 1 / 6 Hz.

10. The highest peak in this range is about 10,000 feet [3,000 m] above sea level.

11. Kita-dake is Sakurajima's highest peak, rising to 1,117 m (3,665 ft) above sea level.

Kita-dake là đỉnh cao nhất của Sakurajima, cao 1.117 m (3.665 ft) so với mực nước biển.

12. The peak of the highest mountain in Pinghe County (Mount Daqin) is #,# metres above sea level

13. 17 The peak level is above normal, and fasting levels may or may not be elevated.

14. Peak power = (peak potential in volts) × (peak beam current in amperes).

15. ‧Peak power‧ = (peak potential in volts) × (peak beam current in amperes).

16. Peak power» = (peak potential in volts) × (peak beam current in amperes).

17. “Peak power” = (peak potential in volts) × (peak beam current in amperes).

18. 'Peak power' = (peak potential in volts) x (peak beam current in amperes).

19. ‘Peak power’ = (peak potential in volts) x (peak beam current in amperes).

20. ‘Peak power’ = (peak potential in volts) × (peak beam current in amperes).

21. "Peak power" = (peak potential in volts) × (peak beam current in amperes).

22. 'Peak power' = (peak potential in volts) × (peak beam current in amperes).

23. [Peak power = (peak potential in volts) x (peak beam current in amperes).]

24. Peak power = (peak potential in volts) x (peak beam current in amperes).

25. All of Nagraj's physical attributes have reached super-human level, and his strength, stamina, durability, agility, reflexes, and speed are far beyond the peak human level.