peak programme level in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: toán & tin
-mức đỉnh của chương trình

Sentence patterns related to "peak programme level"

1. the peak level of single accelerating vehicle events.

2. Gasoline prices are 14% below the peak level they hit in November.

3. The antenna is substantially aligned when the signal strength reaches a peak level.

4. Heat acclimatization lowered the level of the second peak , though it was remarkably prolonged.

5. Elevation ranges from sea level to 1,168 m (3,832 ft) on El Toldo Peak.

Độ cao dao động từ mực nước biển đến 1.168 m (3.832 ft) tại đỉnh El Toldo.

6. Chlordiazepoxide is slowly absorbed and may take several hours to reach a peak plasma level

7. 16 The spectrum level of microseismic noise tends to peak at about 1 / 6 Hz.

8. The highest peak in this range is about 10,000 feet [3,000 m] above sea level.

9. Kita-dake is Sakurajima's highest peak, rising to 1,117 m (3,665 ft) above sea level.

Kita-dake là đỉnh cao nhất của Sakurajima, cao 1.117 m (3.665 ft) so với mực nước biển.

10. The programme aims at making all national highways Railway Level Crossing free by 2019.

11. The peak of the highest mountain in Pinghe County (Mount Daqin) is #,# metres above sea level

12. 17 The peak level is above normal, and fasting levels may or may not be elevated.

13. Peak power = (peak potential in volts) × (peak beam current in amperes).

14. ‧Peak power‧ = (peak potential in volts) × (peak beam current in amperes).

15. Peak power» = (peak potential in volts) × (peak beam current in amperes).

16. Technical Backstopping and project-level support comprised a large part of Global Programme advisory services

17. Heritage programme administrators are typically trained at the post-graduate level in a related discipline.

18. “Peak power” = (peak potential in volts) × (peak beam current in amperes).

19. 'Peak power' = (peak potential in volts) x (peak beam current in amperes).

20. ‘Peak power’ = (peak potential in volts) x (peak beam current in amperes).

21. ‘Peak power’ = (peak potential in volts) × (peak beam current in amperes).

22. "Peak power" = (peak potential in volts) × (peak beam current in amperes).

23. 'Peak power' = (peak potential in volts) × (peak beam current in amperes).

24. [Peak power = (peak potential in volts) x (peak beam current in amperes).]

25. Peak power = (peak potential in volts) x (peak beam current in amperes).