peak heat flux in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: vật lý
-nhiệt thông cực đại
-thông lượng nhiệt đỉnh

Sentence patterns related to "peak heat flux"

1. The conductive heat flux averages 0.1 MW/km2.

Dòng nhiệt dẫn nhiệt trung bình 0.1 MW / km2.

2. It is shown in this theory that entropy flux equals heat flux divided by the absolute temperature.

3. The current heat flux out of Ganymede is probably higher than that out of Callisto.

Lượng nhiệt thất thoát ra bề mặt của Ganymede có lẽ cao hơn so với Callisto.

4. Since 2001 measurements of heat flux have been complemented by Acoustic Doppler Current Profiler (ADCP) recordings.

5. The heat transferred per unit area and unit time ( flux ) is proportional to the temperature gradient.

6. Anthropogenic, or human-made, heat flux in the near-surface atmosphere has changed urban thermal environments

7. Convective heat flux is a flux depending on the temperature difference between the body and the adjacent fluid (liquid or gas) and is triggered by the *FILM card

8. Standard test method for critical radiant flux of floor-covering systems using a radiant heat energy source.

9. Heat acclimatization lowered the level of the second peak , though it was remarkably prolonged.

10. Globally, in 2005, this Anthropogenic heat flux (AHF) was +0.028 W/m 2, or only about 1% of the energy flux being added to Earth because of Anthropogenic greenhouse gases

11. Multifunctional heating systems consist of a CHP module, heat storage system and a peak load boiler.

12. ASTM E 6 Stard test method for critical radiant flux of floor-covering systems using a radiant heat energy source.

13. For the upcoming ATST, the heat load is 2.5 MW/m2, with peak powers of 11.4 kW.

14. Flux capacitor?

Tụ điện thông lượng à?

15. The system makes use of off - peak electricity for cool energy which is stored in latent heat.

16. The flux capacitor.

Tụ điện thông lượng.

17. The role of temperature-dependent viscosity is studied in laminar free convection flow adjacent to a vertical surface with uniform heat flux.

18. This is primarily due to the heat transfer coefficient of gaseous convection, which limits the heat flux that can be attained in a typical cold heat exchanger to about 500 W/(m2·K), and in a hot heat exchanger to about 500–5000 W/(m2·K).

19. The second-order heat flux in thermally driven oscillations of gas columns is calculated and given in a form suitable for numerical evaluation.

20. Bivalent systems utilise a secondary boiler, which is designed to provide heat into the distribution system when the heat pump isn’t sized for 100% of the peak load.

21. Peak power = (peak potential in volts) × (peak beam current in amperes).

22. The roses swarmed in the heat-haze, seeming to flow and recede, seeming to peak and slide like waves.

23. ‧Peak power‧ = (peak potential in volts) × (peak beam current in amperes).

24. Peak power» = (peak potential in volts) × (peak beam current in amperes).

25. “Peak power” = (peak potential in volts) × (peak beam current in amperes).