nominal bearing resistance in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-sức kháng đỡ danh định

Sentence patterns related to "nominal bearing resistance"

1. It is important to provide the nominal electrical resistance when specifying Elements.

2. MICRO fuse, very fast-acting type. Plug-in. Ampere rating Nominal resistance cold 0.0156 Ohms. Voltage rating

3. Disclosed is a bearing device in which an Al-Sn-Si alloy sliding bearing has improved abrasion resistance against a hard steel shaft.

4. In such situations there is resistance to adjusting nominal wages, as this would generate greater reductions in real wages

5. In such situations there is resistance to adjusting nominal wages, as this would generate greater reductions in real wages.

6. The method allows the improvement of bearing resistance characteristics with no use of forging process.

7. Key words: penetrometer test, piles, bearing capacity, cohesive soils, point resistance, lateral friction, steel, concrete, wood.

8. The axle box and the rolling bearing shall be designed with consideration of mechanical resistance and fatigue characteristics.

9. achromatic lens # mm nominal focal length and # mm nominal diameter

10. The Rotomixx is a portable/tote Agitator with a 316 SS gearbox and bearing frame that provide superior corrosion resistance.

11. To improve the frictional resistance while maintaining the same bearing performance, an edge osculation of less than 90% is proposed.

12. Bearing Bronze A combination of low friction and high wear resistance makes these alloys the best choice for use as bearings

13. achromatic lens, 1,000 mm nominal focal length and 75 mm nominal diameter

14. Nominal track gauge/Nennspurweite/

15. For most products, national nominal quantities are allowed to exist alongside Community nominal quantities.

16. Nominal voltage of the alternator

17. Bearing arrangement and bearing block having a magnetic radial bearing and a safety bearing for a rotating machine

18. Bearing and method of forming a bearing

19. Sliding bearing assembly using a roller bearing

20. Nominal beam angle in degrees;

21. The nominal energy is calculated by multiplying nominal voltage by rated capacity expressed in ampere-hours.

22. These engines generated 9.6 nominal horsepower.

Mẫu 99 sử dụng động cơ dầu máy có công suất 600 mã lực.

23. To confirm the design allowable end bearing capacity and rock socket side resistance for the drilled shaft foundations, two test piles were constructed and tested.

24. The bearing unit (20) has a hinge shaft bearing (21) and a ball bearing (22).

25. Number of units or aggregated nominal amount