bending moment (at mid-span) in Vietnamese
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-mômen uốn giữ nhịp
Sentence patterns related to "bending moment at mid-span"
1. Bending results from a couple, or a Bending moment M, that is applied
2. Bending tests are conducted by placing a length of material across a span and pushing down along the span to bend the material until failure
3. Check of interference fit strained by additional radial force with bending moment.
4. Plastic hinge characteristic curves are a bending moment (M) — rotational angle (φ) relationship.
5. Points 4.5.1. (Strength test), 4.5.2. (Resistance to buckling) and 4.5.3. (Resistance to bending moment) only.
6. This force is necessary to create a bending moment that would be able to equilibrate the thermally induced moment due to the dissimilar adherends.
7. Performance limits for the tibia bending moment, the criteria ACL and MCL were presented to participants.
8. Purpose: Critical bending moment (CBM), defined as the bending moment at which the external nonaxial load applied overcomes screw joint preload and causes loss of contact between the mating surfaces of the implant screw joint components, was measured for four different implants and their single-tooth replacement abutments.
9. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending
10. Baseplate frames are to be calculated to support equipment from its lifting lugs with a maximum bending deflection of 1/1000 span.
11. The bending moment at this section = Pcr.y The differential equation governing the small Buckling deformation is given by P y dx d y EI cr
12. Moreover, the influence of initial crookedness would be reduced as slenderness ratio and bending moment are increased.
13. When the flexible lower legform impactor is used for a test according to paragraph 1.3.3, the absolute value of the maximum bending moment of the tibia at:
14. The spanwise aerodynamic loading of wings having minimum induced drag is derived for prescribed lift and root-bending moment.
15. He was bending over his work at desk.
16. A Biaxial column is a column that is subjected to compressive axial force and bending moment in the two planes
17. The shear force and bending moment is initially calculated to determine the point where the Curtailment has to be done
18. Avoid bending at the waist when lifting heavy objects.
19. 3-Point Bending involves placing the material across a span supported on either ends of the material and bringing down a point source to the center
20. The world was bending to my will at last.
21. Not at the moment.
Không phải lúc này.
22. It has a prestressed concrete box girder superstructure consisting of five independent units which are monolithic with their piers and have expansion joints at the mid-span shear hinges and the abutments.
23. Bending tool assembly for determining the bending angle
24. Not at the moment, perhaps.
Có lẽ không phải lúc này,
25. The master jaws at mid- stroke
Các hàm bậc thầy lúc mid- stroke