bending-stress analysis in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-sự tính (toán) uố

Sentence patterns related to "bending-stress analysis"

1. Stress, strain, bending, compression, shear, torsion, tension, hoop stress, fatigue;

2. The classical Westergaard type stress function analysis for in-plane stress crack problems is adapted to classical bending of cracked plates for determination of mode-1 stress intensity factors.

3. Bending tests reveal the elastic modulus of Bending, flexural stress, and flexural strain of a material

4. Analysis of Birches - Rhythm, Stress and Scansion

5. The compressive surface stress is tough in the glass because any bending load has to overcome quenched compressive stress before there's a net tensile stress on the surface.

6. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending

7. Calculation of reactions, courses of forces, moments, stress, deflection and bending angle of the shaft and others.

8. Key words: analysis, concrete (prestress), flexure, partial prestressing, prestressing, strain, stress, steel.

9. Deflection Bending Stress, EJMA ”S6”, is stress resulting from deformation of the sidewalls of the convolutions caused by the movement of the bellows as it compresses, extends, or Angulates

10. Curvature and bending stress amplitude of double helix in langs of wire rope are much larger than in ordinary lay.

11. Just like torsion, in pure Bending there is an axis within the material where the stress and strain are zero

12. It is important to stress the need for a robust analysis of alternatives.

13. Bending tool assembly for determining the bending angle

14. The calculations shall use suitable analysis techniques to establish stress distribution throughout the container.

15. The analysis is developed on the basis of the Airy's stress function in the generalized plane stress and by applying the bipolar coordinates.

16. The model used for Buckling analysis is supported by different supports than set by the user in stress, strain analysis type (EPS).

17. Phospholipid fatty acid analysis showed that the bacteria in the groundwater samples faced starvation stress.

18. In order to study the stress and deflection calculation methods, the stress characteristics of castellated beams were obtained through overall and local stability analysis by ANSYS.

19. This paper presents an analysis on the stress tensor in non-heat conducting nematic liquid crystals.

20. Normally the wall thickness shall be determined by calculation, accompanied, if needed, by experimental stress analysis

21. The finite element method was used for analysis of heat stress in chip on board ( COB ).

22. If the load is compression on the bar, rather than stretching it, the analysis is the same except that the force F and the stress change sign, and the stress is called Compressive stress

23. The wood samples treated with gases were also tested in bending stress. Wood absorbs ammonia very quickly, but the gas is only slightly bound.

24. In addition, the stress on the osseous cup cavity was determined in the finite-element analysis.

25. Normally the wall thickness shall be determined by calculation, accompanied, if needed, by experimental stress analysis.