spindle in English

noun

1

a slender rounded rod with tapered ends used in hand spinning to twist and wind thread from a mass of wool or flax held on a distaff.

There'll always be a huge demand here for raw wool from Australia, provided we can keep the spindles here spinning wool and keep them away from spinning synthetics.

2

a rod or pin serving as an axis that revolves or on which something revolves.

It is for this reason that we spot-face our cranks at the same time we drill the hole for the pedal spindle and bottom bracket axis.

synonyms: rod, axle, pivot, pin, capstan, axis

3

a slender mass of microtubules formed when a cell divides. At metaphase, the chromosomes become attached to it by their centromeres before being pulled toward its ends.

A critical step in the cell cycle is the proper attachment of chromosomes to the mitotic spindle during metaphase.

4

a shrub or small tree with slender toothed leaves and pink capsules containing bright orange seeds. The hard timber was formerly used for making spindles.

A lime tree there is already turning a beautiful bright yellow, and a large Himalayan spindle bush is taking on rich red and pink colouring.

verb

1

impale (a piece of paper) on a metal spindle for temporary filing purposes.

do not fold, spindle, or mutilate

noun

rod, axle, pivot, pin, capstan, axis
mandrel, mandril, arbor
spike

Use "spindle" in a sentence

1. Spindle Galaxy

2. Centrosomes,Centrioles, Spindle Fibers.

3. 13 Involute spindle spindle: ideal bearing capacity and easy assembling and dismantling.

4. Carriage mounted spindle control lever.

5. The spindle sweep measurement will show that the spindle axis is perpendicular to the table surface

6. The axis of the dragging spindle is equipped with mixing blades (11) which conform a mixing spindle with a direction of advance opposite to that one of the dragging spindle.

7. Spindle adapter flanges for machine tools

8. Spindle shanks and thick red hands.

9. Attach the magnetic base to the spindle

10. This arrangement makes it possible to achieve a very small spindle advance with normal threads of the spindle-unit.

11. During automatic recovery, the spindle drawbar unclamps and you will hear a blast of air coming from the spindle nose

12. Spindle advance screw with draw bar actuator

13. Spindle motor having an electrostatic discharge path

14. The layer spindle was an early development.

15. Antherozoids • The antherozoid is spindle like and biciliate

16. Multiple spindle tapping unit produces high efficiency operation.

17. Guiding element for the spindle of a jack

18. Spindle bearing support for balancing universal joint shafts.

19. The nut has been worked on the spindle.

20. Using a spindle to form the yarn

21. This is an ideal spindle tree system.

22. SEATING: 9 Spindle Bowback Arm Chair in Oak

23. A case of spindle cell hemangioendothelioma is reported.

24. Tool holding fixtures for machine tools, in particular spindle adapters, spindle flange attachments, taper shanks, chucks, lengthening and reducing pieces for tools

25. The thread needs to be wound around the spindle.

26. Centrioles involve in the synthesis and organizing of spindle fibers whereas centromeres provide a site of attachment to the spindle fibers

27. The Antherozoids: The antherozoid is spindle like and biciliate

28. The princess tried the spindle, but pricked her finger.

29. The Atlantic Croaker has a fusiform, or spindle-

30. Attach the magnetic base to the spindle nose

31. 17 The nut has been worked on the spindle.

32. Failed test pins... microcracks in the spindle, mag comp corruption...

33. Specialists in Roving Machine, Gill box Bobbiner, Hollow spindle etc

34. The shapes are created on the spindle using one template.

35. The cell then divides along the spindle apparatus orientation.

36. Disk storage device with improved spindle torque and acceleration

37. The spindle will turn at a maximum of 750rpm

38. Remember, spindle speed also affects outside diameter holding force

39. Suddenly she pricked her little finger on the spindle.

40. Spindle drive for an adjustment element of a motor vehicle

41. A primary induction power supply operably coupled to the spindle.

42. A spindle motor control circuit (20) for controlling the acceleration and position locking of a spindle motor (22) includes a first mode of operation whereby the spindle motor (22) is commutated through use of an external clock (32, 34).

43. Said regulating device is driven by an operating spindle (25) which can be driven by means of its own advancing motor (56), synchronously with the spindle (6) or with a speed difference predetermined in relation to said spindle (6).

44. We use CNC sliding headstock lathes and automatic multi-spindle machines.

45. Microscopically, there are spindle to oblong cells with hyperchromatism and pleomorphism.

46. The spindle in the plasmodial state is open and acentric.

47. The M-94 used 25 aluminium disks on a spindle.

48. Select program O02020 " Spindle Warm- up " and press [ SELECT PROGRAM ]

49. And we'll keep the spindle speed below the recommended 900 rpm

50. With the machine geometry verified, start the " Spindle Warm- Up " program