1. Spindle Galaxy

2. Centrosomes,Centrioles, Spindle Fibers.

3. 13 Involute spindle spindle: ideal bearing capacity and easy assembling and dismantling.

4. Carriage mounted spindle control lever.

5. The spindle sweep measurement will show that the spindle axis is perpendicular to the table surface

6. The axis of the dragging spindle is equipped with mixing blades (11) which conform a mixing spindle with a direction of advance opposite to that one of the dragging spindle.

7. Spindle adapter flanges for machine tools

8. Spindle shanks and thick red hands.

9. Attach the magnetic base to the spindle

10. This arrangement makes it possible to achieve a very small spindle advance with normal threads of the spindle-unit.

11. During automatic recovery, the spindle drawbar unclamps and you will hear a blast of air coming from the spindle nose

12. Spindle advance screw with draw bar actuator

13. Spindle motor having an electrostatic discharge path

14. The layer spindle was an early development.

15. Antherozoids • The antherozoid is spindle like and biciliate

16. Multiple spindle tapping unit produces high efficiency operation.

17. Guiding element for the spindle of a jack

18. Spindle bearing support for balancing universal joint shafts.

19. The nut has been worked on the spindle.

20. Using a spindle to form the yarn

21. This is an ideal spindle tree system.

22. SEATING: 9 Spindle Bowback Arm Chair in Oak

23. A case of spindle cell hemangioendothelioma is reported.

24. Tool holding fixtures for machine tools, in particular spindle adapters, spindle flange attachments, taper shanks, chucks, lengthening and reducing pieces for tools

25. The thread needs to be wound around the spindle.

26. Centrioles involve in the synthesis and organizing of spindle fibers whereas centromeres provide a site of attachment to the spindle fibers

27. The Antherozoids: The antherozoid is spindle like and biciliate

28. The princess tried the spindle, but pricked her finger.

29. The Atlantic Croaker has a fusiform, or spindle-

30. Attach the magnetic base to the spindle nose

31. 17 The nut has been worked on the spindle.

32. Failed test pins... microcracks in the spindle, mag comp corruption...

33. Specialists in Roving Machine, Gill box Bobbiner, Hollow spindle etc

34. The shapes are created on the spindle using one template.

35. The cell then divides along the spindle apparatus orientation.

36. Disk storage device with improved spindle torque and acceleration

37. The spindle will turn at a maximum of 750rpm

38. Remember, spindle speed also affects outside diameter holding force

39. Suddenly she pricked her little finger on the spindle.

40. Spindle drive for an adjustment element of a motor vehicle

41. A primary induction power supply operably coupled to the spindle.

42. A spindle motor control circuit (20) for controlling the acceleration and position locking of a spindle motor (22) includes a first mode of operation whereby the spindle motor (22) is commutated through use of an external clock (32, 34).

43. Said regulating device is driven by an operating spindle (25) which can be driven by means of its own advancing motor (56), synchronously with the spindle (6) or with a speed difference predetermined in relation to said spindle (6).

44. We use CNC sliding headstock lathes and automatic multi-spindle machines.

45. Microscopically, there are spindle to oblong cells with hyperchromatism and pleomorphism.

46. The spindle in the plasmodial state is open and acentric.

47. The M-94 used 25 aluminium disks on a spindle.

48. Select program O02020 " Spindle Warm- up " and press [ SELECT PROGRAM ]

49. And we'll keep the spindle speed below the recommended 900 rpm

50. With the machine geometry verified, start the " Spindle Warm- Up " program

51. Hypopigmented and achromatic melanocytic tumors with spindle cells represent a diagnostic challenge.

52. Move the spindle head down to the middle of Z- axis travel

53. WEN 3.5-Amp Oscillating Spindle Sander with Extra Large Beveling Table Top

54. The spindle carrying the cutter block (7) extends across the bed (1).

55. The spindle (18) is enabled or disabled by a latching mechanism (44).

56. 15 Involute spline spindle: ideal bearing capacity and easy assembling and dismantling.

57. The spindle for Bulrushes is not to be sprinkled either on the …

58. Spiraling is caused by misalignment between the Broach and the work spindle

59. If necessary, move the tailstock or 2nd spindle to the HOME position

60. Method and device for the assembly and disassembly of a preplasticizing spindle

61. D Anaphase A Anaphase A is the dynamic mitotic stage during which the sister chromatids separate further and migrate along the spindle to opposite spindle poles (Inoué and Ritter, 1975).

62. The tool has a tool spindle (1) with a tool holding fixture (2) through which lubricant is supplied, as well as a drive for rotating and axially advancing the tool spindle.

63. Chiasmata are essential for proper segregation on the meiotic spindle because they provide the physical tension, or glue, that the microtubules pull against. If the centromere of each replicated pair attaches to a different spindle pole, then as the microtubules pull, the chromosomes will align in the middle of the spindle.

64. The sister Chromatids are pulled apart by the shortening of the spindle fibers

65. All this while the mill - loom and mill - spindle ratios continued to improve .

66. If your program spindle speed does exceed 750rpm, the program will not run

67. Hand-fed vertical spindle moulding machines for working with wood and analogous materials.' ;

68. Hand-fed vertical spindle moulding machines for working with wood and analogous materials.

69. Place boxes filled with packing foam under the spindle and tool carousel pocket

70. The Cobia has an elongated, spindle-shaped body and a large, flattened head

71. 5x Wall Quartz Clock Spindle Long Gold Hand Movement Mechanism Repair Kits DIY

72. Primary crank arms (6) are connected to a spindle (16) via cylindrical pins.

73. Detach the Red Security Bracket between the Turret Face and the Spindle Bulkhead

74. Along the bottom, we have the spindle information box with the override display

75. ◦ alteration of cell cycle and mitotic spindle apparatus leading to chromosomal aberrations

76. In Anaphase, these homologues are pulled on by the mitotic spindle, being pulled apart.

77. The acceleration of the spindle of an injection-moulding machine is to be increased.

78. Spindle cells appear to play a central role in the development of intelligent behavior.

79. This makes the feet much more stable when compared to stilettos or spindle heels .

80. Among the Hebrews and others the distaff and spindle were employed in this process.