dynamometer in English

noun
1
an instrument that measures the power output of an engine.
First, under the testing conditions described, it is not possible for the dynamometer to measure the locomotive's maximum drawbar pull.
noun

Use "dynamometer" in a sentence

Below are sample sentences containing the word "dynamometer" from the English Dictionary. We can refer to these sentence patterns for sentences in case of finding sample sentences with the word "dynamometer", or refer to the context using the word "dynamometer" in the English Dictionary.

1. The dynamometer power absorption must take into account the dynamometer friction.

2. Dyno - A chassis dynamometer.

3. Dynamometer and test cell equipment

4. ◄ Below this, dynamometer absorption must be positive.

5. Below this, dynamometer absorption must be positive

6. Below this, dynamometer absorption shall be positive

7. Absorption dynamometer and torque measurement therefor

8. Alternative dynamometer test (Alternative to track test)

9. Below this, dynamometer absorption shall be positive.

10. Alternative dynamometer test (alternative to track test)

11. The kinetic energy of the device is dissipated by the dynamometer power absorption unit and by the friction of the dynamometer.

12. Alternative dynamometer load setting method used (yes/no)

13. Adjustable load curve dynamometer setting information (if used)

14. total load absorbed by the chassis dynamometer (N)

15. Alternative dynamometer load setting method used (yes/no): ...

16. F = total load absorbed by the chassis dynamometer (N

17. 4.3.1. Alternative dynamometer load setting method used (yes/no): ...

18. Adjustable load curve dynamometer setting information (if used): ...

19. Diagram illustrating the power absorbed by the chassis dynamometer

20. 4.3.1. Alternative dynamometer load setting method used (yes/no (1))

21. Mean coast down time on the chassis dynamometer without absorption

22. Power and load absorbed by the dynamometer at 80 km/h

23. A graphical display of the NRTC dynamometer schedule is shown below

24. Aerometers, ammeters, barometers, densimeters, dynamometer detectors, indicators, manometers, measuring instruments, regulators, rheostats, thermometers

25. Adjust the dynamometer to the absorbed load (F) at 80 km/h.

26. The actual dynamometer torque shall be used as input to the HV model.

27. Adjust the tyre pressure (cold) of the driving wheels as required by the dynamometer.

28. Adjust the equivalent inertia mass of the chassis dynamometer, according to Table 2.

29. Chassis dynamometer speed shall be measured from the roller coupled to the power absorption unit.’

30. Adjust the tyre pressure (cold) of the driving wheels as required for the chassis dynamometer

31. The vehicle may be run on a test track or on a kilometre accumulation dynamometer

32. The vehicle may be run on a test track or on a kilometre accumulation dynamometer.

33. Effective power absorbed at 80km/h including running losses of the vehicle on the dynamometer (kW)

34. This section describes the method to be used to determine the load absorbed by a dynamometer brake

35. Effective power absorbed at 80 km/h including running losses of the vehicle on the dynamometer (kW): ...

36. Chassis dynamometer speed shall be measured from the roller coupled to the power absorption unit.

37. The dynamometer power absorber setting for light-duty vehicles is rounded off to the nearest # kW

38. This Sub-appendix describes a method used to determine on-road power absorption using a dynamometer.

39. Method of calibrating the on-road power absorption by the dynamometer for motorcycles or motor tricycles ...

40. The dynamometer power absorber setting for light-duty vehicles is rounded off to the nearest 0,1 kW.

41. The test dynamometer shall have a cylindrical flywheel (drum) with a diameter of at least 1.7 m.

42. This section describes the method to be used to determine the load absorbed by a dynamometer brake.

43. This appendix describes the method to be used to determine the load absorbed by a dynamometer brake.

44. Method of calibrating the on-road power absorption by the dynamometer in the case of motorcycles or motor tricycles

45. - Sub-appendix 4: Method of calibrating the on-road power absorption by the dynamometer for motorcycles or motor tricycles ..........

46. Effective power absorbed at 50km/h h including running losses of the vehicle on the dynamometer (kW)

47. Effective power absorbed at 50 km/h including running losses of the vehicle on the dynamometer (kW): ...

48. The isometric strength of the hip Abductors and external rotators was quantified using a belt-stabilized handheld dynamometer

49. The following sequence shall be followed in dynamometer operation on the test engine, as shown in Figure 3.

50. In the alternative, the dynamometer (10) is attached to the existing tension idler wheels by a coupling plate.