1. Optical low pass filter

2. Provided is a resonator type dielectric low pass filter.

3. The acoustic resistance acts as a low pass filter.

4. Resonator type dielectric low pass filter and communication device including same

5. Blurring is an example of applying a low-pass filter to an image

6. Low-pass filter of graphical tablet has cut-off frequency lower than sampling frequency

7. Two examples are considered, a low pass filter and a wide band beam splitter.

8. A low-pass filter (110) has a cut-off frequency lower than the shift frequency.

9. All models of the Taurus use a 24db/octave resonant low pass filter with key tracking.

10. These filters can also be created by combining a low-pass filter with a high-pass filter.

11. The limited frequency response of the headset eliminates the RF component, making the low pass filter unnecessary.

12. In the UWB band-pass filter, a low-pass filter for improving band-stop characteristics is additionally connected.

13. A more versatile R-C active low-pass filter has been developed using two similar stages in cascade.

14. The PLL includes a phase frequency detector, a charge pump, a low pass filter, a voltage controlled oscillator and a frequency divider .

15. A filter used for Blurring is also called low pass filter, because it allows low frequency to enter and stop high frequency

16. With the current and speed setpoint filter (low-pass filter or band-stop filter) it is possible to attenuate resonance of the drives.

17. The high-pass filter enables immediate signal amplification and the low-pass filter limits the noise bandwidth and acts as an anti-aliasing filter.

18. Anti-Aliasing low-pass filter designs must provide fast roll off with sufficient stop band attenuation to lower signal amplitudes sharply above the Nyquist frequency

19. Additionally, a digital low pass filter is unnecessary on the output side of the A/D converter apparatus (308), allowing implementation in a small-scale additional circuit.

20. Evaluation parameters: (Down sampling to 1 kHz, followed by) 2.0 Hz 4th order Butterworth low-pass filter, followed by an ideal rectifier to give the absolute value.

21. During noise reduction, the WavePurity FFT noise filter applies an additional low-pass filter in order to block all amplitudes of the wavelengths above a certain frequency.

22. Evaluation parameters: (Down sampling to 1 kHz, followed by) 2,0 Hz 4th order Butterworth low-pass filter, followed by an ideal rectifier to give the absolute value.

23. Unique to TDESIGN is the ability to shape the transient not only amplitude-wise but also with a dynamically controlled 24 dB low-pass filter with resonance control.

24. The resonance current , caused by the LC low pass filter at the step change of PWM switching pattern, can be effectively suppressed by one pulse control of the pattern.

25. Both analog signals (V1, V2) are guided to a third pulse width modulator (SW1) which is controlled depending on the digital fine portion, a low-pass filter (TP3) being mounted downstream thereof.

26. Said delay-difference detector (6) further comprises an analog adder/subtracter (9) for adding/ subtracting sequential-logic circuit output signals and low pass filter(s) (10) located before or after said adder/subtracter (9).

27. In GMSK, the signal to be modulated onto the carrier is first smoothed with a Gaussian low-pass filter prior to being fed to a frequency modulator , which greatly reduces the interference to neighboring channels (adjacent channel interference).

28. Well, it turns out it is fairly common to sacrifice some quality and, since Blurring is a low-pass filter (preserves low frequency signals while attenuating high frequency ones), down-scale to a smaller resolution buffer, for example to 1/2 by 1/2, perform the blur effect and then up …

29. It comprises a delay means (14) for introducing a time delay into the distorted signal (RQ (t)), a mixer (4) adapted to multiply the received distorted signal (RQ(t)) with the delayed distorted signal and to provide an adjusted output signal, (Radj(t)), with a distortion term, a low pass filter (5) adapted to extract a signal comprising the second harmonic of the distortion term from the adjusted output signal (R adj (t)) related to twice the frequency difference (2Δω) between the local oscillator and the carrier frequency of the input modulated signal (R(t)), and means for removing modulated data from said signal to provide a recovery signal free from modulated data that can be used to eliminate the distortion.