1. Air release valve

2. Air inlet valve

3. Air relief valve

4. Air release valve for compression bag and compression bag with air release valve

5. Combination air release valve

6. Snorkel air inlet valve

7. Air-relief valve assembly

8. An air release valve

9. Air inlet valve for an airplane and manufacturing method for an air inlet valve

10. Odour trap with check valve and air admittance valve

11. Air valve for spray gun

12. Control Valve Air lock Relay Principle

13. Refrigerator having an air-admission valve

14. Air hose with pressure relief valve

15. Engine air intake shut off valve

16. liter air reservoir with drain valve

17. litre air reservoir with drain valve

18. Valve damaged or excessive air leak.

19. Air intake valve (7), if fitted

20. Air intake valve (3), if fitted

21. Integrated charge air and egr valve

22. Air stop valve of airtight body

23. Trapped air release valve for tents

24. PVC Air Admittance Valve with 20 DFU Branch and 8 DFU Stack (2-Pack) Oatey's Air Admittance Valve is a 1-way valve Oatey's Air Admittance Valve is a 1-way valve designed to allow air to enter the plumbing drainage system when negative pressure develops in the piping system

25. Valves and valve fittings for tyres, such as metal and plastic valves, tubeless valves, valve patches, valve caps, valve extensions, connections for filling and releasing air from air tyres, attachable nipples

26. Air Admittance Valve Trap Assembly Kit with 1-1/2 inch Tuuber Vent 2x Superior Seal Air Admittance Valve

27. Control valve for automatic compressed-air brakes

28. (a) Valve damaged or excessive air leak.

29. — Air intake valve if fitted equipment (5)

30. Air to air aftercooler heated bypass with load sensing switching valve

31. Control valve for a charge air circuit

32. 30-litre air reservoir with drain valve

33. 30 litre air reservoir with drain valve

34. 30 liter air reservoir with drain valve

35. Valves and valve fittings for tyres and flexible pipes, such as metal and plastic valves, tubeless valves, valve patches, valve caps, valve extensions, connections for filling and releasing air from air tyres, attachable nipples

36. The present invention provides an air inlet valve (2) for an airplane and a manufacturing method for an air inlet valve.

37. Device for opening a valve, particularly an air inlet valve or gas outlet valve of a fermentation or digestion tank

38. Shut valve to auxiliary engines and emergency air.

39. The pump sucks air out through this valve.

40. Control valve for an air conditioner, and air conditioner for a vehicle

41. Open the air inlet valve to supply compressed air to the machine

42. R1 = 30 litre air reservoir with drain valve

43. The pump sucks air out through the valve.

44. An air reservoir valve selectively controls air flow into and out of the air reservoir.

45. A vent valve, an integrated air pump comprising the vent valve and an electronic sphygmomanometer.

46. Device for opening a valve, especially an air-inlet valve or a gas-leak valve of a fermentation or digestion tank

47. Fuel tank relief valve setting (air ingestion and relief);

48. Fasteners for vehicle engine components, namely air cleaner studs, engine manifold fasteners, air conditioner (AC) element brackets, valve cover studs, and valve cover spacers

49. (3) The air intake valve is the control valve for the pneumatic governor of the injection pump.

50. The pilot valve (44) permits air pressure to flow to an actuator which opens the drain valve.

51. Packaging for metal-air batteries with hydrogen release valve

52. (7) The air intake valve is the control valve for the pneumatic governor of the injection pump.

53. 4 The air intake valve is the control valve for the pneumatic governor of the injection pump.

54. The compressed air control valve (1) is connected to the main air duct (2).

55. The relief valve (68) adjusts the air pressure of the air intake chamber (64).

56. e The air intake valve is the control valve for the pneumatic governor of the injection pump.

57. (5) The air intake valve is the control valve for the pneumatic governor of the injection pump.

58. Method for control of air intake and valve for air intake and its application

59. Air inlet and relief valve (17, 20) may also be provided as an integral part of the valve.

60. An air relief valve for use with an irrigation pipe.

61. Spool valve for switching air flows between two adsorption beds

62. Absolute throttle position/intake air throttle position (position of valve used to regulate intake air)

63. absolute throttle position / intake air throttle position (position of valve used to regulate intake air)

64. Absolute throttle position / intake air throttle position (position of valve used to regulate intake air)

65. An Air Admittance Valve is a 1-way valve designed to allow air to enter the plumbing drainage system when negative pressures develop in the piping system

66. Description of fuel tank relief valve setting (air ingestion and relief): ...

67. Idle air control valve wire stress relief feature and assembly aids

68. The pump sucks air out ( of the vessel ) through this valve.

69. Charge air valve system for use in an internal combustion engine

70. Method for adjusting a residual air gap of a magnetic valve

71. When the valve (4) is actuated, the intake air flows between the valve disk (6) and valve seat (12) through the mechanically or electrically driven blade wheel (10).

72. Method of operating a directed relief valve in an air conditioning system

73. Preferably, the air-inlet comprises a non-return or one-way valve.

74. Operating fluid reservoir having an integrated venting and/or air admission valve

75. The present invention is related to air pressure valve stems and gauges.

76. Intake air mixes with the exhaust gas downstream from the first valve.

77. Cavitation is achieved by permitting air to enter the transesterification flow system through an adjustable air inlet valve.

78. At the back of the Machine, open the Air Inlet Valve to supply compressed air to the Machine

79. The invention relates to a compressed air supply device (10) for a commercial vehicle, with a valve housing (12) and an air-drying cartridge (14) connected releasably to the valve housing.

80. On-air tank is mounted on a pressure gauge and a safety valve.