1. An additional recess is located in the resistor element on the side of the voltage connections.

2. Piezoresistive resistor

3. connected through a resistor (r1) to the screening plate (sp) and additional plates (p¿1?, ..., p¿n?).

4. Another common type of resistor is the thin-film resistor.

5. Resistor fabrication

6. a resistor,

7. The modifications include adjusting a length of the resistor, forming a compound resistor structure, and forming a replacement resistor.

8. Circuit-Horizontal Resistor (European

9. Chip resistor substrat

10. 3.7 Resistance/Resistor

11. Some adjustments are performed using a temporary matching resistor chosen to simulate the loading of at least one additional resonator.

12. Adjustable mos resistor

13. — terminating resistor 50 Ohms

14. — Terminating resistor 50 Ohms

15. Adjustable fluid flow resistor

16. The energy-conserving device may further include a resistor and a second switch which are connected in parallel with the additional ballast.

17. Terminating resistor 50 Ohms

18. Circuit-Vertical Resistor (European

19. Ceramic resistor or sensor element

20. Let's say resistor 2 is 3 ohms, and let's say resistor 3 is 5 ohms.

21. Adjustable fluid flow resistor cassette

22. A process tunable resistor is fabricated by adjusting elements of the resistor during a fabrication process.

23. The invention relates to a switch that can be used, inter alia, in a resistor insertion device and does not require additional movable mechanical parts.

24. Fuse resistor, and method for manufacturing same

25. Memory resistor adjustment using feedback control

26. Let's say resistor 1 is 2 ohms.

27. So we can just draw each resistor separately.

28. Film thermal resistor is one of temperature sensors.

29. An additional protective element, in particular a PTC resistor or a thermal fuse, is optionally integrated into the connection between the element and the electronic safety system.

30. Using high precision resistor, capacitor, IC with low noise.

31. For transformer, capacitor, resistor and electronic component lead cutting.

32. Portable electric device for adjusting a variable resistor

33. I think there's something wrong with the resistor.

34. A battery model that includes additional dynamics can be used and shall then be based on the representation using resistor and capacitor circuits as shown in Figure 34.

35. Adjustable resistor with slider made from elastomeric material

36. But each resistor only sees the voltage source.

37. A current-limiting resistor is usually not necessary.

38. Function as a resistor in normal operation condition.

39. Biasing using a Drain-to-Gate Feedback Resistor 4

40. Detector for force, acceleration and magnetism using resistor element

41. The minimum number of components of a Clamping circuit is three – a capacitor, a resistor and a diode.In some cases, DC supply is also needed to give an additional shift

42. When the resistance value of the adjustment resistor (R¿P?)

43. The first semiconductor logic family was resistor–transistor logic.

44. Note: All outputs are protected by 470 Ohm resistor.

45. A voltage drop across the adjustment resistor (R¿P?)

46. Physically, the resistor is effectively the source of noise.

47. The drive includes a resistor and an output transistor.

48. Temperature set point circuit and method employing adjustment resistor

49. Terminating resistor # or # Ohms depending on radio-set type

50. The second resistor has been replaced by a capacitor.

51. The Bolometers developed at IPP are miniaturized metal resistor Bolometers

52. The Bolometers ITER will use are miniaturized metal resistor Bolometers.

53. In this technique, an additional resistor is used and the circuit is slightly modified from the self-Biasing technique, a potential voltage divider using R1 and R2 provide the required DC Biasing …

54. A chip resistor array is manufactured by the following method.

55. Electronics-Salon Thick Film Network Resistor Assortment Kit, Array Resistor, Bussed Type, 1/8W, SIP-5 and SIP-9 470 1K 4.7K 10K 47K ohm.: Amazon.com: Industrial & Scientific

56. Switchable junction with an intrinsic diode formed with a voltage dependent resistor

57. In addition, a detuning resistor (K) is provided that can optionally be connected, directly or indirectly in parallel, to at least one resistor in the Wheatstone bridge.

58. Each Bypassed resistor voltage grading and safe discharge after switching off

59. For example, if a 300 ohm resistor is attached across the terminals of a 12 volt battery, then a current of 12 / 300 = 0.04 amperes flows through that resistor.

60. The resistor is linear, symmetrical and adjustable by varying biasing levels.

61. — Terminating resistor 50 or 75 Ohms depending on radio-set type.

62. Rescalc 0 resistor calculator has been much improved since its original release.

63. To each switch is allocated a measuring resistor (R), these measuring resistors (R) forming a resistor network with a node to receive a quasi-analog acceleration signal (a).

64. Adjustible resistor for use in a resistive divider circuit and method for manufacturing

65. The flow resistor (18, 28) can be positioned against an abutment such that the resistor elements (20a, 20b, 20c) are compressed when subjected to pressure by the aerated liquid.

66. The invention also relates to a method for producing said resistor assembly.

67. I don't know, just for fun, let's throw in a third resistor.

68. Four-terminal resistor with four resistors and adjustable temperature coefficient of resistance

69. Scan-Speak Flow Resistor Aperiodic Vent - EACH Cutout size is 4.3 inches

70. In addition there may be sense leads (22, 24) present on the resistor.

71. 2 : involving a single thread or wire doubled back upon itself a Bifilar resistor.

72. Adjust the differential trimmer capacitor until a minimum voltage across resistor R2 is obtained.

73. 23 To test resistor R first energize Ch. 1 to bias the test coupon.

74. In order to ensure that the power converter can be safely disconnected from a voltage source, the additional electrical element (7, 10, 11) is configured as a fuse (7), temperature-independent resistor (10), or capacitor (11).

75. In addition, the SCXI-1520 system offers a half-bridge completion resistor network in the module and a socketed 350 Ω quarter-bridge completion resistor in the SCXI-1314 terminal block.

76. Additional synonyms, Additional pronunciation, Additional translation, English dictionary definition of Additional

77. From Ohm's law, the voltage difference across the resistor is therefore about 350 mV.

78. SMD/SMT Bussed 8 Resistor Networks & Arrays are available at Mouser Electronics

79. Compute the voltage across a 120W termination resistor when using 1150W Biasing resistors.

80. The Biasing is created by self, using the voltage drop across source resistor