yield strength of reinforcement in tension in Vietnamese
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-cường độ đàn hồi của thép lúc kéo
Sentence patterns related to "yield strength of reinforcement in tension"
1. Re= yield strength in N/mm2, or 0,2 % proof strength or, for austenitic steels, 1 % proof strength;
2. Ties, tension straps, joist hangers, brackets, support angles, bed joint reinforcement and lintels
3. Key words: code calibration, geometric properties, reliability, steel, tensile strength, yield strength.
4. Belts are neoprene with fiberglass reinforcement for quiet operation with high strength.
5. The metal reinforcement gives it the strength to resist the high winds.
6. Reinforcement structure for a concrete anchorage zone for piles and tension members for building construction
7. Yield strength is the lowest stress that produces a permanent deformation in a material.
Độ bền uốn là ứng suất thấp nhất làm biến dạng vĩnh viễn cho một vật liệu xem xét.
8. 6 To give it strength in compression and tension, steel rods were embedded in the concrete.
9. — ties, tension straps, joist hangers, brackets, support angles, bed joint reinforcement and lintels to be incorporated in masonry walls, columns and partitions.
10. - ties, tension straps, joist hangers, brackets, support angles, bed joint reinforcement and lintels to be incorporated in masonry walls, columns and partitions.
11. The yield strength of pure aluminium is 7–11 MPa, while aluminium alloys have yield strengths ranging from 200 MPa to 600 MPa.
Sức bền của nhôm tinh khiết là 7–11 MPa, trong khi hợp kim nhôm có độ bền từ 200 MPa đến 600 MPa.
12. Curtailment of Reinforcement Bars in Slabs
13. Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture
14. Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture;
15. Front Axles Forged from 4340 material & heat treated for high tensile and yield strength. Increased material in the yoke area for added strength
16. • Develop methods and devices to better predict the ultimate strength of tension, bending, shear and compression.
17. (a) Testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture;
18. The steel product may have an increase in elongation and an increase in yield strength after age hardening.
19. (a) testing of the material of construction in respect at least of yield stress, tensile strength, and permanent elongation at fracture;
20. Key words: columns, confinement, ductility, high-strength concretes, lightweight aggregate concretes, reinforcement, stress–strain relationships, tests, ties, toughness.
21. Both compressive strength and tension strength of test specimens cured with CM-A are equal to or a bit higher than that with wet burlap.
22. Low alloy steel with a high yield strength and high sulphide stress cracking resistance
23. Strain-Ageing is known to cause an increase in yield strength and ultimate tensile strength of reinforcing steel bars, while tensile elongation capacity will be less in strain-aged steel bars
24. Aluminized steel was developed for providing more structural durability and a high yield strength in highly corrosive environments
25. Improper method of Concreting may lead to corrosion of steel reinforcement due to pores, cracks in concrete and concrete may not achieve its target strength on setting