yield strength in Vietnamese

@Chuyên ngành kỹ thuật
-điểm tới hạn
-giới hạn chảy
-giới hạn chảy quy ước
-giới hạn đàn hồi
-giới hạn rão
-ứng suất chảy
@Lĩnh vực: xây dựng
-cường độ chảy

Sentence patterns related to "yield strength"

Below are sample sentences containing the word "yield strength" from the English - Vietnamese Dictionary. We can refer to these sentence patterns for sentences in case of finding sample sentences with the word "yield strength", or refer to the context using the word "yield strength" in the English - Vietnamese Dictionary.

1. Key words: code calibration, geometric properties, reliability, steel, tensile strength, yield strength.

2. Low alloy steel with a high yield strength and high sulphide stress cracking resistance

3. Yield strength is the lowest stress that produces a permanent deformation in a material.

Độ bền uốn là ứng suất thấp nhất làm biến dạng vĩnh viễn cho một vật liệu xem xét.

4. Re= yield strength in N/mm2, or 0,2 % proof strength or, for austenitic steels, 1 % proof strength;

5. Aluminized steel was developed for providing more structural durability and a high yield strength in highly corrosive environments

6. The steel product may have an increase in elongation and an increase in yield strength after age hardening.

7. Creep is a time-dependent deformation of a material while under an applied load that is below its yield strength

8. As the temperature falls below # °C the ultimate strength (Rm) and the yield strength (Rp # ) increase slightly for all aluminium alloys (see figure

9. Measured yield strength of line pipe is used to determine the pipe grade of every pipeline section referring to technical standard API 5L.

10. The yield strength of pure aluminium is 7–11 MPa, while aluminium alloys have yield strengths ranging from 200 MPa to 600 MPa.

Sức bền của nhôm tinh khiết là 7–11 MPa, trong khi hợp kim nhôm có độ bền từ 200 MPa đến 600 MPa.

11. Front Axles Forged from 4340 material & heat treated for high tensile and yield strength. Increased material in the yoke area for added strength

12. As the temperature falls below 0°C the ultimate strength (Rm) and the yield strength (Rp0,2) increase slightly for all aluminium alloys (see figure).

13. Strain-Ageing is known to cause an increase in yield strength and ultimate tensile strength of reinforcing steel bars, while tensile elongation capacity will be less in strain-aged steel bars

14. Except for UN No 1001 acetylene, dissolved, the permissible maximum stress of the manifolding arrangement at the test pressure of the receptacles shall not exceed 75 % of the guaranteed yield strength of the material.

15. Exposed Bolting (High Strength) ASTM A453/A453M Grade 660D solution - treated and age hardened Bolting shall be acceptable at a hardness o f HRC35 and lower, and a minimum 0.2 % offset yield strength of 725 MPa (105,000 psi )