positive bending moment in Vietnamese
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-mômen uốn dương
Sentence patterns related to "positive bending moment"
1. Bending results from a couple, or a Bending moment M, that is applied
2. Check of interference fit strained by additional radial force with bending moment.
3. Plastic hinge characteristic curves are a bending moment (M) — rotational angle (φ) relationship.
4. Points 4.5.1. (Strength test), 4.5.2. (Resistance to buckling) and 4.5.3. (Resistance to bending moment) only.
5. This force is necessary to create a bending moment that would be able to equilibrate the thermally induced moment due to the dissimilar adherends.
6. Performance limits for the tibia bending moment, the criteria ACL and MCL were presented to participants.
7. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending
8. Moreover, the influence of initial crookedness would be reduced as slenderness ratio and bending moment are increased.
9. Positive aileron deflection produces an anti - clockwise moment about the X axis.
10. The spanwise aerodynamic loading of wings having minimum induced drag is derived for prescribed lift and root-bending moment.
11. A Biaxial column is a column that is subjected to compressive axial force and bending moment in the two planes
12. The shear force and bending moment is initially calculated to determine the point where the Curtailment has to be done
13. Third, recognise that the moment you lose your positive attitude you are victimising yourself.
14. Purpose: Critical bending moment (CBM), defined as the bending moment at which the external nonaxial load applied overcomes screw joint preload and causes loss of contact between the mating surfaces of the implant screw joint components, was measured for four different implants and their single-tooth replacement abutments.
15. Bending tool assembly for determining the bending angle
16. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus
17. The bending moment at this section = Pcr.y The differential equation governing the small Buckling deformation is given by P y dx d y EI cr
18. Adequate correlation exists between bending MOE and bending strength with moisture content.
19. The curves bending moment vs curvature change are given and discussed for various parameters (ratio of axes A/B, normal pressure q, curvature parameter μ).
20. The Bending Iron maintains an even, thermostat-controlled heat for Bending wood
21. We're bending the curve.
Chúng ta đang bẻ cong nó.
22. If we assign the direction of the calculated dipole moment from negative to positive, then the dipole moment calculated from STO—GTF minimum basis set is comparable with the experimental results.
23. When the flexible lower legform impactor is used for a test according to paragraph 1.3.3, the absolute value of the maximum bending moment of the tibia at:
24. This bending indicates the Cone …
25. Bending vibration frequency in aerofoils;