non-uniplanar bending in Vietnamese

@Chuyên ngành kỹ thuật
-sự uốn xiê

Sentence patterns related to "non-uniplanar bending"

1. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending

2. Non-numerically controlled bending, folding, straightening or flattening machines for working flat metal products (including presses)

3. Bending tool assembly for determining the bending angle

4. The rhabdom of the unpigmented ocellus is eccentrically located and its microvilli are not uniplanar.

5. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus

6. Adequate correlation exists between bending MOE and bending strength with moisture content.

7. The Bending Iron maintains an even, thermostat-controlled heat for Bending wood

8. Axial corrections are performed by additive or subtractive techniques using uniplanar joints or by angulation procedures.

9. Bending results from a couple, or a Bending moment M, that is applied

10. We're bending the curve.

Chúng ta đang bẻ cong nó.

11. This bending indicates the Cone …

12. Bending vibration frequency in aerofoils;

13. — Bending vibration frequency in aerofoils;

14. Bowed: bending downward or forward.

15. Air Bending Combat: Air Bending is known for being almost entirely defensive, however it is reputed to be the most dynamic of the four Bending Arts

16. Bending tests reveal the elastic modulus of Bending, flexural stress, and flexural strain of a material

17. Bowing: bending downward or forward.

18. (4) Bending and tensile strength

19. What does Bending mean? Information and translations of Bending in the most comprehensive dictionary definitions resource on …

20. Amob is world’s leading manufacturer for Tube Bending Machines, Pipe Benders, Angle Rolls and Section Bending Machines

21. Lifting and Bending the right way

22. Bending angle α shall be 180°.

23. Bending strength was also favourably affected.

24. Be careful of bending that spoon.

25. Compression Bending is faster and has a lower per-unit tooling cost than many other tube Bending methods.