in tension in Vietnamese

@Chuyên ngành kỹ thuật
-bị kéo

Sentence patterns related to "in tension"

1. Indeed, it often seems that those two principles are in tension, doesn’t it?

2. The outer ply (72) is prestressed in tension during manufacture of the tire (50).

3. For their part, the stirrups were highly stressed in tension and flexure, and usually reached plastification.

4. An approach of calculating initial stress and deformation in tension winding according to misfit is advanced.

5. The coil spring is in tension with the coil spring's top adjacent to the candle body's top.

6. In addition, the drive element in tension is designed not to enter a bundle of previously installed strands.

7. The sealing member (25) is in tension adjacent to the sealing seat (17) when in a sealing position.

8. Conclusion Acellular dermal matrix patch can be widely used in tension-free herniorrhaphy as an ideal hernia repair material.

9. The case of capital inflow than the outflow of capital, domestic capital will result in tension, thus affecting economic growth.

10. New Jazz That Agitates for Change A conversation about strong recent debuts, and how canon and community can be in tension

11. The use of ground anchors in tension and the glazing mullions as compression members resolves the forces from the cable-net.

12. The subassembly is held to a mass construct with micromachined screws to the base portion, forming an accelerometer assembly in tension.

13. Adverse condition of concrete in tension and steel joist in compression occurs at inner support regions of continuous composite steel concrete beams.

14. And if you have just the wall with no fluid inside of it to put the wall in tension, you've got a little wet rag.

Nếu chỉ có tường mà không có chất lưu bên trong giữ độ căng, đó sẽ chỉ là miếng giẻ rách ẩm ướt.

15. An adhesive strength of 0.06 MPa was recorded in tension, and 0.13 MPa in compression, because of the relative stiffness of the pile and the ice.

16. It is demonstrated that the approach has enough flexibility to account for the Bauschinger Effect, history dependence in cyclic creep and cross hardening in tension-torsion experiments.

17. Consequently, the third identity is generally seen to be more open and tolerant towards others, and is often in tension with the more traditional and insular identities of the interior.

Do đó, đặc tính thứ ba thường được cho là cởi mở hơn và khoan dung hơn, và thường căng thẳng với các đặc tính truyền thống và cô lập hơn của khu vực nội lục.

18. 3 Countermarche Looms Have Even sheds This may not seem terribly important, but with any loom that has a one way shed, there is a different in tension between the top

19. 23 Students from urban-rural fringe are characterized as more self-defensive, self-centered, and in tension with their parents, thus they find it harder to do well in their studies and daily life.

20. 17 This paper describes the tests of 4 R. C. beams glued with steel plate. Data of strain of longitudinal bars, glued bottom steel plate in tension, glued web plate and glued steel "stirrup" plate of R.

21. Cantilever definition, any rigid structural member projecting from a vertical support, especially one in which the projection is great in relation to the depth, so that the upper part is in tension and the lower part in compression

22. Thrust loads may be directed either forwardly, as during propulsion operation of the engine, which places the thrust links 30, 32 in tension; or the thrust loads may be directed Aftward, as upon deployment of the conventional thrust reversers of …

23. Alternating load examinations at 250 N and 500 N in 30 sowbone patellae showed a significantly increased deformation (mean 1.5 mm) in tension belt osteosynthesis, whereas the deformation after i and 2 XS-Nail osteosynthesis showed lowered deformation than the control, non-osteotomised patellae.

24. A bucksaw is a hand-powered frame saw generally used with a sawbuck to cut logs or firewood to length ().Modern Bucksaws usually have a metal frame (“H” or “C”-shaped) and a removable blade with coarse teeth held in tension by the frame.

25. In tension lap splices, the benefit provided to the lap by stirrups placed to intercept longitudinal cracking due to bond splitting action is recognized by the American Concrete Institute code (ACI 318-89) and the design recommendations of ACI Committee 408, on which the American code provisions are partially based.

26. A bucksaw is a hand-powered frame saw similar to bow saw and generally used with a sawbuck to cut logs or firewood to length ().Modern Bucksaws usually have a metal frame ("H" or "C"-shaped) and a removable blade with coarse teeth held in tension by the frame

27. A Bucksaw is a hand-powered frame saw similar to bow saw and generally used with a sawbuck to cut logs or firewood to length ().Modern Bucksaws usually have a metal frame ("H" or "C"-shaped) and a removable blade with coarse teeth held in tension by the frame