ignition timing in Vietnamese

@Chuyên ngành kỹ thuật
-sự điều chỉnh đánh lửa
-sự định thời đánh lửa
@Lĩnh vực: ô tô
-cân lửa
@Lĩnh vực: điện lạnh
-định thời mồi
@Lĩnh vực: cơ khí & công trình
-sự chỉnh lửa

Sentence patterns related to "ignition timing"

Below are sample sentences containing the word "ignition timing" from the English - Vietnamese Dictionary. We can refer to these sentence patterns for sentences in case of finding sample sentences with the word "ignition timing", or refer to the context using the word "ignition timing" in the English - Vietnamese Dictionary.

1. Actual compression ratio and ignition timing in a predetermined standard state after completion of engine warming are prestored, respectively, as the reference actual compression ratio and reference ignition timing.

2. A system and method for adjusting the ignition timing of an engine.

3. For a given engine speed, the ignition timing may be step-wise adjustable.

4. The ignition timing can also be advantageously adjusted using the calculated quantities of air.

5. The ignition timing is then adjusted to release the spark at the appropriate time.

6. In this operating mode, the controller changes the phase angle α of the thyristor ignition timing.

7. The ignition timing may be adjusted when the engine speed increases above a threshold engine speed.

8. The propensity of organic compounds to undergo such multistep Autoxidation determines the ignition timing of fuels in engines

9. Ignition timing (Specify the tolerance.): ... degrees before TDC at a speed of ... rpm and a MAP of ... Pa5.5.

10. Further lambda adjustment can be performed by suitable control of egr, ignition timing, and/or turbo air bypass (TAB).

11. The system may adjust an ignition timing in response to the predicted gas burning rate within the same engine cycle.

12. Engine output torque is adjusted as required by controlling some combination of ignition timing, intake air flow, fuel injection, and accessory load.

13. Even though your local mechanic may adjust the fuel mixture and advance the ignition timing for you, your engine will still have less power.

14. The method may also comprise adjustment of ignition timing so that, in conjunction with low load and speed conditions, ignition occurs at least 5?

15. If the ignition timing is adjustable, the propulsion unit performance shall be measured with the ignition advance set within ± 5° of the value at which maximum engine power is achieved.

16. In this system the crankshaft rotating angle, where the peak combustion pressure occurs, is taken to be a feed back signal, so that the ignition timing of the engine is able to be controlled.

17. A crank angle advanced from the in-cylinder-pressure-maximizing crank angle (θPmax) is set as the second crank angle (θ2) in a manner so as to result in a timing in the adiabatic compression step on the lagging side with respect to the ignition timing, and is used in the absolute pressure correction.