acid solution in Vietnamese
Dung dịch axit
Sentence patterns related to "acid solution"
1. Polyamic acid solution
2. Sulphuric acid solution: 0.2 mol/l
3. DL-Malic acid solution # g/l
4. • Vinegar (weak acid solution) Method 1.
5. Stabilized hypochlorous acid solution and use thereof
6. Acetic Acid Solution, 1M, 1L - The Curated Chemical Collection
7. Anodizing is commonly performed in a sulfuric acid solution.
8. The acid solution is made alkaline with sodium hydroxide solution.
9. Sulphuric acid solution containing about 30 % of H2SO4 (W/V)
10. M# = the actual molarity factor of the sulphuric acid solution
11. Phenol dissolves in water to produce a weak acid solution.
12. Hydrochloric acid solution for use as a laboratory diagnostic agent
13. Sulphuric acid solution, approximately 30 % H2SO4 (W/V), ammonia free
14. The acid solution is alkalized with a sodium hydroxide solution.
15. Blow through any remaining acid solution with a stream of air.
16. These then form coloured complexes with ferric ions in acid solution.
17. They were able to restore the plates using an acid solution.
18. Transfer the acid solution containing the dye to the funnel and extract
19. V0 = Volume of 0,01 mol hydrochloric acid solution in ml for blank
20. Polyamic acid solution, polyimide resin, and flexible copper clad laminate using same
21. 18 Acidoresistant: Without corrode in 5 % hydrochloric Acid solution at 24 hour.
22. Transfer the acid solution containing the dye to the funnel and extract.
23. Filter into a separating funnel and add # ml of sulphuric acid solution
24. The etching of the enamel is avoided by choosing a non acid solution.
25. Add to each flask # ml chloroform and # ml metaphosphoric acid solution at # oC
26. Slice the Apricots and dip them in an ascorbic acid solution to stop discoloration
27. Ions of alkali metals or anions buffering in acid solution interfere at higher concentrations.
28. Animal charcoal, when added to acetic acid solution and shaken vigorously, Adsorbs acetic acid
29. The estimation of an alkali solution using a standard acid solution is called Acidimetry
30. Adjust the pH to # with orthophosphoric acid solution and dilute to # ml with water
31. Filter into a separating funnel and add 0,25 ml of sulphuric acid solution (2.1).
32. Polyamic acid solution, polyimide resin and a soft metal-foil laminate employing the same
33. Acid solution for professional use. Removes traces of cement and plaster on new flooring.
34. This readily is accomplished by slurrying the manganese dioxide in an aqueous acid solution.
35. (ii) following an acid treatment, treating with an acid solution for 10-12 hours.
36. Recover metals from the spent acid pickling solution and reuse the cleaned acid solution
37. The cellulose acetate-acetic acid solution is diluted in a mixer, with additional acetic acid.
38. Make up to volume with 0,5 mol/l hydrochloric acid solution (4.2) and mix thoroughly.
39. The resistance of seven different concrete mixtures against a 0.5% sulfuric acid solution was examined.
40. Make up to 100 ml with 0,5 mol/l hydrochloric acid solution (4.2) and mix thoroughly.
41. This indicator is violet in acid solution, grey in neutral solution and green in alkaline solution.
42. Evaporate all the remaining ethyl acetate from the acid solution using a rotary film evaporator (2.4).
43. Antimonious is converted into antimonic chloride by treatment with permanganate of potash in an acid solution
44. Make up to the mark with boric acid solution (#.#.#) and add # μl of #-mercaptoethanol (#.#.#) by syringe
45. Antimonious is converted into Antimonic chloride by treatment with permanganate of potash in an acid solution
46. Evaporate all the remaining ethyl acetate from the acid solution using a rotary film evaporator (4.2).
47. Make up to the mark with boric acid solution (#.#) and add # μl of #-mercaptoethanol (#.#) by syringe
48. In the case of Method 9.2, add 5 ml of the dilute hydrochloric acid solution (4.1).
49. Titrate the distillate with the 0.1 N hydrochloric acid solution until the indicator turns pinkish violet.
50. The described modification of the method employs a sulphuric acid solution and copper-coated zinc granules.