centre line in Hungarian

centrális középvonal tengely

Sentence patterns related to "centre line"

Below are sample sentences containing the word "centre line" from the English - Hungarian Dictionary. We can refer to these sentence patterns for sentences in case of finding sample sentences with the word "centre line", or refer to the context using the word "centre line" in the English - Hungarian Dictionary.

1. The centre line of the impactor must be aligned with the centre line of the rib's piston.

2. The Child Restraint System centre line shall be aligned exactly with the centre line of the test bench.

3. The centre line of the impactor should be aligned with the centre line of the rib's guide system.

4. The centre line of the impactor should be aligned with the centre line of the rib's guide system

5. The profile of an aerofoil blade is measured through centre line determination.

6. P= pelvis reference point (at the rear on the centre line of the manikin)

7. Align the impactor accelerometer with its sensitive axis parallel to the impactor longitudinal centre line

8. Align the impactor accelerometer with its sensitive axis parallel to the impactor longitudinal centre line.

9. The field generating device shall be positioned on the vehicle's centre line (plane of longitudinal symmetry

10. 3.3.3. Align the impactor accelerometer with its sensitive axis parallel to the impactor longitudinal centre line.

11. The field generating device shall be positioned on the vehicle's centre line (plane of longitudinal symmetry).

12. The field generating device shall be positioned on the vehicle’s centre line (plane of longitudinal symmetry).

13. 2.3.3. Align the impactor accelerometer with its sensitive axis parallel to the impactor longitudinal centre line.

14. P= pelvis measurement point (located at the back on the centre line of the manikin).ANNEX

15. Adduction A movement towards the centre line of the body. Muscles which adduct are called adductors

16. "Wheel offset" means the distance from the hub abutment face to the centre line of the rim. "

17. ‘Wheel offset’ means the distance from the hub abutment face to the centre line of the rim.

18. "Wheel offset" means the distance from the hub abutment face to the centre line of the rim."

19. Wheel offset means the distance from the hub abutment face to the centre line of the rim

20. Permitted intrusion of a wheel arch not extending beyond the vertical centre line of the side seat

21. ‘wheel off-set’ means the distance from the hub abutment face to the centre line of the rim;

22. 2.3.2. "Wheel offset" means the distance from the hub abutment face to the centre line of the rim.

23. A track comprising a track centre line of variable curvature on a horizontal section and having a variable superelevation angle.

24. heading control lines, intended for minor adjustment, should be located at the centre line of the stem and stern, in a symmetrical fashion and at a level between the position of KG and the damaged waterline; and

25. 4.2.1. heading control lines, intended for minor adjustment, should be located at the centre line of the stem and stern, in a symmetrical fashion and at a level between the position of KG and the damaged waterline; and

26. A lighthouse, for example, comes Abeam when it is at a right angle to the centre line of the boat.For navigational purposes the right angle is important - a landmark may seem to be Abeam over quite a wide arc.

27. The Cornering force generated at any one time will be approximately proportional to the shaded area between the tyre centre line and the Cornering force plotted line so that the resultant Cornering force (centre of pressure) will act behind the static centre of contact.

28. The wheels shall have a hardness of # ± # IRHD, as measured at four points equally spaced on the centre line of the abrading surface, the pressure being applied vertically along a diameter of the wheel and the readings being taken # seconds after full application of the pressure

29. The effective strap length between A1 and the centre line of the retractor spool Re (when the webbing is fully extracted including the minimum length of 150 mm for testing of Enhanced Child Restraint System shall be [2820] ± 5 mm when measured in a straight line without load and on a horizontal surface.

30. Where a control shaft is used to operate the end cock it must be possible for the plug to be fitted with a forked lever in such a way that the rotation angle between the extreme conditions of the cock be symmetrical in relation to the perpendicular line to the longitudinal centre line of the cock (see Fig.

31. The effective strap length between A1 and the centre-line of the retractor spool Re (when the webbing is fully extracted including the minimum length of 150 mm */ for testing of universal and semi-universal categories shall be 2 820 ± 5 mm when measured in a straight line without load and on a horizontal surface; this length may be increased for testing of restricted category; for all categories with the child restraint installed there shall be a minimum of 150 mm */ of strap length on the retractor spool.