1. Using the shear resistance – shear displacement data from undrained monotonic ring shear tests and several processed horizontal earthquake accelerograms, the minimum peak earthquake acceleration necessary to cause a catastrophic shear failure under various seismic waveforms was estimated for conditions of no shear stress reversals on the sliding surface.

2. Key words: bored pile design, side resistance, matera clay, reliability-based design, undrained shear strength, adhesion factor.

3. It is the thermal resistance of unit area of a material.

4. Cu-Ni-Si BASED COPPER ALLOY SHEET HAVING HIGH DIE ABRASION RESISTANCE AND GOOD SHEAR PROCESSABILITY AND METHOD FOR PRODUCING SAME

5. Curves of error of the formulas describing the resistance per unit length are given.

6. Begohm - A unit of resistance equal to one billion ohms, or one thousand megohms

7. Shear algorithm

8. The present invention provides a shear reinforcement for a reinforced concrete structure which may be installed within a reinforced concrete structure after the installation of reinforcing bars during construction, in order to increase resistance against shear failure.

9. Shear layer

10. Shear factor

11. Shear angle Y

12. Shear-jashub (3)

13. Shear angle X

14. Shear Amazement, Kitchener, Ontario

15. In 1852, Weber defined the absolute unit of electrical resistance (which was named the ohm after Georg Ohm).

16. The driving unit which allows extremely short-time measurements and the measuring equipment for shear and normal stresses as well as angular velocity are described.

17. Shear tool plugin for digiKam

18. The adhesives formed from these compositions have high shear strength at elevated temperature, improved adhesion to substrates having low surface energies, improved heat resistance, and extended pot times.

19. Airway Conductance in studies of respiration, an expression of the amount of air reaching the alveoli per unit of time per unit of pressure, the reciprocal of airway resistance

20. Hydrostatic shear inducing short dwell coater

21. 12 All shear stresses must vanish.

22. S. Pascall Unit R1 Unit S1 Unit A1 Unit B1 Unit C1 Unit D1 Unit E1 Unit F1 Unit G1

23. Plugs, anchors, anchor screws, bolts, shear connectors

24. 15 A fluid cannot withstand a shear.

25. It is found that the critical buckling load, per unit of length normal to the plane of deformation, isGH, the infinitesimal shear modulusG times the widthH of the column.

26. CPT Correlations and shear wave velocity Correlations

27. Keywords: Cofferdams, stability, cell shear, sliding, bursting

28. Simultaneous shear and denaturation of nucleic acids

29. The camber of the plate after cutting in disc type shear is reduced by adding hydraulic movable pusher in front of the shear and adjusting the side guide roller behind the shear.

30. Also, consider throughput rate and shear sensitivity.

31. Modification of the adhesive properties increased the cleavage fracture toughness and shear strength of bonded joints and improved the resistance of joints to cyclic swell-shrink treatment and accelerated moist-heat aging.

32. Pressure-sensitive adhesive composition having high shear strength

33. A digiKam image plugin to shear an image

34. The farmer taught her how to shear sheep.

35. The shear changed the quadrilateral into a parallelogram.

36. Shear thickening fluid and armor material comprising same

37. To Characterize the shear softening deformation of the grain contact: (5) τ = u s k si 1 + u s k si / τ S τ < c + σ n tanφ σ n tanφ when slipping where τ, u s, τ S, k si, c, and φ denote the shear stress, shear displacement, parameter controlling nonlinear shear deformation, initial shear stiffness, cohesion, and friction angle of the

38. A high strength, high modulus fiber is applied to uncured adhesive in the glueline of a laminar wood beam as an anti-sag agent and for improved shear strength, creep resistance, and gapability.

39. Siemens, S is the unit of Conductance.When the resistance of a component is 1 ohm then its Conductance is also 1 Siemens.When the resistance is increased to double, the Conductance is decreased to half and vice-versa.

40. Method and apparatus for acoustic shear wave logging

41. It is based on a database of past PDC bits. In the databased, it includes bit type, average shear stress of well which bit was used in, cost per unit length.

42. With increasing displacement, rocks, which have undergone synthetic and/or Antithetic shear, pass into the zone of Antithetic shear and are deformed again

43. The resultant cladding layers provide significantly increased abrasion resistance and reduced unit weight in comparison with skid shoes (20) having conventional wear-resistant materials.

44. 1 The farmer taught her how to shear sheep.

45. The compositions have improved properties including solvent resistance, adhesion, hardness, abrasion resistance and mar resistance.

46. 16 The process does not affect the shear stresses.

47. The cemented carbide coating has advantages of impact resistance, high temperature resistance and abrasion resistance.

48. 14 Low resistance measurement applications include contact resistance, superconductor resistance, and resistivity measurements of conductors.

49. PSI Crimped STEEL FIBER are low carbon, cold drawn steel wire fibers designed to provide concrete with temperature and shrinkage crack control, enhanced flexural reinforcement, improved shear strength and increase the crack resistance of concrete

50. The amplitude of this normal stress is proportional to that of the oscillatory shear and the components in phase and 90‡ out of phase with the oscillatory shear prove to be odd functions of the steady shear rate.

51. 3 Low Resistance Measurement Applications: Contact resistance, superconductor resistance measurements and resistivity measurements of conductive materials.

52. Cubature unit — noun a unit of measurement of volume or capacity • Syn: ↑volume unit, ↑capacity unit, ↑capacity measure, ↑cubage unit, ↑cubic measure, ↑cubic content unit, ↑displacement unit • …

53. The reduced transpiration in water-efficient clones per unit of dry matter produced was associated with a higher stomatal resistance on the abaxial leaf surface.

54. Shear fatigue of the bracket-adhesive complex for 1,000 cycles revealed a variable, material-dependent influence on the shear strength of the bracket-adhesive complex.

55. The cellulose-based resin has excellent mechanical strength, heat resistance, water resistance, chemical resistance and thermoplasticity.

56. Strength (ucs) of carbonates using compressional and shear acoustic velocities

57. 17 The conditions of interruptable shear wall height are proposed.

58. A Coulomb failure criterion is used for determining shear fracture.

59. Stress, strain, bending, compression, shear, torsion, tension, hoop stress, fatigue;

60. Angstrom (unit) synonyms, Angstrom (unit) pronunciation, Angstrom (unit) translation, English dictionary definition of Angstrom (unit)

61. No resistance.

62. The coating material has a high adhesion to concrete, good endurance, freezing and tolerance resistance to crack stress generated in concrete itself, and good chlorine resistance, acid resistance, alkaline resistance, and ozone resistance.

63. It is genetically a metamorphic deposit controlled by shear zone.

64. Acetal is an engineering resin which provides superior fatigue resistance, creep resistance, dimensional stability, stiffness and water resistance

65. Unit One to Unit Seven.

66. In general, increasing Asperity density will increase shear strength performance.

67. In soil slopes, developing shear surfaces generate acoustic emission (AE).

68. 14 All kinds of cold metal, salt, shear die manufacturing.

69. 13 Without loss of generality, shear deformations will be neglected.

70. 30 Relationship between MRF' s yield stress and magnetic flux density, the shear stress and magnetic flux density and shears tress and shear rate were investigated.

71. Free-wheeling unit and adjusting unit, and crank mechanism comprising said free-wheeling unit and adjusting unit

72. Buckled panels are still effective in carrying shear by diagonal tension.

73. You can select the X and Y angles to shear by.

74. Shear wave elastography offers an alternative approach, using acoustic radiation force.

75. Mow alfalfa and bundle it in bales, shear sheep, bust broncos.

76. Key words: Ground improvement, undrained shear strength, consolidation, stress path, settlement.

77. 20 The shear strenth is equal to the cohesion of substance.

78. It is excellent also in transparency, water resistance, and abrasion resistance.

79. Pressure-sensitive adhesives exhibiting an improved shear strength at elevated temperatures

80. A tacky acrylic adhesive with low shear strength can be used.