1. The chuck can be connected with machine tools through Morse taper , Jarno taper , ...

2. The distal taper section has a relatively abrupt slope, and the proximal taper section has a relatively gradual slope.

3. The jeans taper towards the ankle.

4. TAPER SHANK Interchangeable Counterbores page 180.

5. Split-Taper® Bushed bore sprockets and split taper bushings secure drive shafts to a base or housing

6. Locking taper abutment provided with weakened zone

7. Bourns 250K Audio Taper Guitar Pot-Coarse Spline

8. Bourns 500K Linear Taper Guitar Pot-Coarse Spline

9. 11 Immigration is expected to taper off.

10. She lit the gas with a taper.

11. Taper Shank Counterbore Tools with holes for Interchangeable Pilots

12. The box contained a taper to light each firework.

13. Outside the cold wind snuffed the taper out.

14. The ellipse cone grinding and taper grinding is compared.

15. Bickern (plural Bickerns) An anvil with two projecting taper ends

16. The abrasive disc is not fixed to the taper portion.

17. Another struggled to relight his taper, extinguished by the wind.

18. Taper the shape of your eyebrows towards the outer corners.

19. A lighted taper appeared in mid-air, right beside him.

20. Now that there is a taper, they complain just as loudly.

21. It is composed of a taper shank cap, a hollow taper shank, an awl perch, an awl stem casing, a permanent magnet and screwdriver heads of different format dimensions.

22. The taper for withdrawing council tax benefit is much steeper.Sentencedict.com

23. PYREX™ Liebig Condensers, Standard Taper Outer and Inner Joints, Drip Tip

24. Tolerances are held uniformly from the mounting to the working Collet taper

25. With the taper cut and the work piece clamped at full pressure

26. What does Bickern mean? An anvil with two projecting taper ends

27. DON’T try to taper off: It prolongs the agony of withdrawal.

28. The leaves are bright green and taper to a point at the tip.

29. 30 I suggested that we start to taper off the counseling sessions.

30. Bourns Pro Audio series 250K audio taper pots made specifically for guitars and basses

31. DWK Life Sciences Kimble™ Kontes™ Allihn Condensers with standard taper Joints

32. Cupped the small flame with a trembling hand. Cast about for a taper.

33. In this way, the grooving anchor rods can taper in the tapering die set.

34. To compensate for this deflection, cutting a slight taper in the jaws may become necessary

35. Unlike other trees, it doesn't taper very much. It stays fat all the way up.

36. Closures shall incorporate a leakproof gasket except where a taper thread ensures comparable leakproofness.

37. Bourns Pro Audio series 500K linear taper pots are made specifically for guitars and basses

38. A taper has two sides, the underside is a circle, the flank is a camber.

39. Cutting Broaches are sized and sold according to the major and minor sizes on the taper

40. These Arbors with chuck allow drills with a Morse taper spindle to accept standard drill bits

41. The curve equations of worm indexing earn mechanism with taper and spherical roofer have been listed.

42. After the taper is cut and the correct force is applied to the work piece

43. Zreneyfex Square Taper JIS Bottom Bracket 68 X110mm/123mm/127mm for Mountain Bike Replace BB-UN26.

44. We carry Morse taper, R8, 5C, 3C, ER and Brown & Sharpe Collets. All our Morse taper and Brown & Sharpe Collets are available individually as well as in sets. Collet & Chuck Set, ER-25, 2MT Includes …

45. (g) Closures shall incorporate a leakproof gasket except where a taper thread ensures comparable leakproofness.

46. It meant three or four degrees of taper on most surfaces, cylindrical surfaces slightly conical.

47. VGEBY1 Bottom Bracket, BSA-Innenlager Bike Square Taper Bottom Bracket for Fat Snow Bike 80142 100155 100177mm

48. Our main products are ball Bearings, pillow blocks, UC Bearings, taper roller Bearings, spherical roller Bearings, etc.

49. The servants came scurrying with new brooms and pails; taper boys ran to replenish the wall-sconces.

50. Some manufacturers taper the framing members (varying in web depth) according to the local loading effects.

51. The active waveguide has an asymmetrical taper, formed by a diagonal etch across the active layer during fabrication.

52. JET Geared-Head Engine Lathe with Acu-Rite 203 DRO, Taper Attachment and Collet Closer — 14in

53. Carom shafts have a straight taper and feature a smaller tip diameter ranging from 11.75mm-12mm.

54. Degree mathematics, elementary trigonometry and handbook formulae to calculate angles of taper and to do lay-out work.

55. Tool holding fixtures and adapters, namely spindle flange attachments, taper shanks, chucks, lengthening and reducing pieces for mechanical tools

56. As a base of post processing, the grinding of Taper Shank Twist Drill effects the qualified rate of drill.

57. Anagrams for Apter » apert, pater, petra, Petra, prate, preta, repat, taper, trape How to pronounce Apter?

58. The walls are 7 feet thick at the base and taper to 28 inches at the top.

59. Well suited to diverse machining jobs, including large press-formed plates and plastic molds requiring large taper angles.

60. This will taper the face so the bore is larger diameter at the bottom than at the top

61. For how wide it is, the Backland 107 has pretty moderate tip taper lines, and more significant tail taper compared to other skis in its class like the Black Diamond Helio 105, K2 Wayback 106, and Blizzard Zero G 105.

62. Degree Points mathematics, elementary trigonometry and handbook formulae to calculate angles of taper and to do lay-out work.

63. The 180cm Backland 100 has 129.5/100/120mm width dimensions, for a taper of only 9.5mm and 19.2m turn radius.

64. Browning H40H15 Roller Chain Sprocket, Single Strand, Split Taper, Bushed, Hardened Steel, 40 Pitch, 15 Teeth Visit the Browning Store

65. This meant that the flutes were full width at the base of the sphere, but taper down on the top.

66. If the charcoal does fail to light, use a special liquid spray and light it with a long taper.

67. With the industry standard 5-degree taper, our Bungs are designed to ensure a perfect fit into tapered holes.

68. A full floating Axle has two deep groove ball or taper roller bearings, located between the Axle casing and wheel hub

69. Tool holding fixtures for machine tools, in particular spindle adapters, spindle flange attachments, taper shanks, chucks, lengthening and reducing pieces for tools

70. A taper cutting is possibly done in the machine, which also possesses the function of numerical control abrasive as a multi-machining.

71. Cymbals with a pronounced taper in thickness from the bell to its thinner edge may be described as having ride and crash areas

72. Shop Shaft Mount Taper Bushed Reducers at Applied.com and browse our extensive selection of industrial parts and supplies for all your MRO needs.

73. The abutment face has a taper angle of no less than 10 degrees relative to a longitudinal axis of the projectile.

74. The Aero Taper Lock Attachment System (ATLAS) is a durable and dependable mounting platform, maintaining a slim profile while providing strength and stability.

75. The effect of jet pressure, standoff, travel speed and cutting radius on the cut depth and kerf taper of smooth zone was investigated.

76. The transitional coupler (150) which is based on a taper and a grating (155) enables the mode expansion and adiabatic transition between both waveguides.

77. The candlestick was in the form of an angel holding a nosegay, in the centre of which the wax taper was to be placed.

78. The Couplers are machined to have taper threads at both ends, creating a mechanical butt splice of two sections of reinforcing steel

79. Tool holding fixtures and adapters for mechanical tools, in particular spindle flange attachments, taper shanks, chucks, lengthening and reducing pieces for tools

80. There was a scrape as she brought a taper forth from a tin box and leaned towards the fire to light it.