1. Then the steam passes into the turbine.

2. Double-action bleeding valve of steam turbine

3. Production well → Separator → Steam → Scrubber → Scrubber → Turbine

4. The first was the introduction of the steam turbine.

5. 3-GP-358M Lubricating Oil, Steam Turbine, Extreme Pressure June 83

6. Sealing assembly on a steam turbine housing, comprising an adjustable sealing ring

7. The Condenser will catch up the steam that has passed through the turbine

8. The turbine is able to work at high vacuums and cooling temperatures above the exit temperature of the steam in the turbine.

9. Located on approximately 24 acres in Baytown, Texas, the plant consists of three combustion turbines with three heat recovery steam generators that supply steam to a steam turbine.

10. Fossil Fuel-Fired Coal Steam Oil/Gas Steam Combined Cycle Integrated Gasification Combined Cycle Turbine (Combustion and Advanced Combustion) Cogeneration Units Repowered Units

11. Portable tester for a servo system operating a hydraulic actuator for a steam turbine valve

12. The analysis of the creep process of a quick closing valve of a steam turbine is presented.

13. 12 The vapor pressure, speed, discharge main valve of steam turbine make direct influence to its operation.

14. The main function of Condenser is to establish a lower back pressure at the exhaust of steam turbine, so that the steam can do most to

15. A method controls operation of one or more ventilation fans of an air-cooled condenser for condensing exhaust steam from a steam turbine of an electric power plant.

16. The invention relates to a multistage steam turbine (1) having a second MD control wheel (27), which is situated behind the first stage part (7) of the turbine and which can be subjected to the action of additional steam (31) during overload operation.

17. First, sunlight may be used to heat a liquid that produces steam, which, in turn, drives a turbine engine.

18. The present invention relates to a tester that includes: a hydraulic actuator (cylinder) for adjusting the degree to which a steam turbine valve opens, or for opening/closing the steam turbine valve; and valve devices including a hydraulic servo valve for operating the hydraulic actuator.

19. 16 In the superheat cycle, the saturated dry steam leaving the boiler drum is further heated before entering the turbine.

20. Sunlight may, for example, be used to heat a liquid that produces steam, which, in turn, drives a turbine engine.

21. The adoption of oil-fired water-tube boilers and steam turbine engines meant that older small cruisers rapidly became obsolete.

22. Waste heat from industrial processes is occasionally concentrated enough to use for power generation, usually in a steam boiler and turbine.

23. Internally, all six vessels used Brown-Curtis geared steam turbine engines, which could use either heavy fuel oil or coal for propulsion.

24. Turbine blades and turbine vanes

25. So for example, in a power plant, when your big steam turbine gets too over speed, you must open relief valves within a millisecond.

26. According to the present invention, the portable tester for a servo system operating a hydraulic actuator for a steam turbine valve of a power plant using a turbine detects a defect in the hydraulic actuator and valves.

27. The desire for further increases in cycle conditions and consequent increases in the cycle efficiency, led to the addition of steam reheat during turbine expansion.

28. Turbine blade for a water turbine with bi-directional flow

29. AEROPLANES TURBINE (**)

30. Turbine failure?

31. Wind turbine device

32. Top list of all unique Steam Badges, Steam event Badges, and Steam sale Badges.

33. Cogeneration plants are energy efficient and can be attractive options for reduction of operating costs, especially where the gas turbine exhaust can be used for heating or steam generation

34. 28 The heated steam is then fed through the reminder of the turbine before being condensed. The reheat cycle incorporates an improvement in thermal efficiency over the superheat cycle.

35. Method for adjusting the rotational speed of a wind turbine and wind turbine

36. Wind turbine design software Bladed wind turbine software is a simulation tool that is key for optimizing your turbine at every phase of its design.

37. Steam jet air-ejectors, rotary water strainers, steam jet vacuum augmentors, steam jet thermocompressors, and compressors

38. Condensers increase the enthalpy drops and turbine work by lowering the turbine outlet pressure

39. Adjustable diffuser for a turbine, turbine for an exhaust gas turbocharger and exhaust gas turbocharger

40. Blade for gas turbine

41. Split-flow recirculating gas turbine

42. Arrangement for securing turbine blades

43. Adjusting device for a turbine

44. Kaplan turbine having adjustable blades

45. Burner for a gas turbine and method for reducing thermo-acoustic oscillations in a gas turbine

46. Wind turbine blade, and apparatus and method for manufacturing spar for said wind turbine blade

47. Wind turbine having nacelle fence

48. Gas turbine compressor cleaning units

49. Condenser (heat transfer), a device or unit used to condense vapor into liquid.Specific types include: HVAC air coils; Condenser (laboratory), a range of laboratory glassware used to remove heat from fluids Surface Condenser, a heat exchange installed in steam-electric power stations to condense turbine exhaust steam into water

50. As turbine-driven air compressors driven by an exhaust-gas turbine, they fall in heading 8414.

51. Structure of axial-type multistage turbine

52. Gas turbine engine fuel air mixer

53. Steam riveting machines

54. Adjustable diffuser for a turbine of an exhaust-gas turbocharger, and turbine for an exhaust-gas turbocharger

55. Electric steam machines utilize steam to force the water through the coffee.

56. - steam engines, gas/steam turbines, turbo-generators, compressors, pumps and actuating devices;

57. A gas turbine engine system includes a gas turbine engine (10) having aerodynamic drag that retards movement.

58. Ram air turbine hydraulic power system

59. Gas turbine, particularly an aircraft engine

60. Nacelle cooling system for wind turbine

61. It is ripe in technology and doable in practice that one old condensing turbine with proper parameter is remade to be postposition turbine of the back extraction pressure turbine.

62. The Steam Client Bootstrapper is an essential component of the Steam Client

63. Wind turbine having flow-aligned blades

64. HEATING UNIT TO OTHER HEAT EXCHANGERS STEAM TRAP STEAM HEADER CONDENSATE RETURN LINE -MAIN STEAM STOP VALVE -Baanch LINES BOILER FITTINGS -MAIN STEAM LINE CITY WATER MAKEUP FEEDWATER PUMP BOILER BOILER …

65. Centrifugals are aerodynamic or turbine type

66. Gas turbine aero engine afterbody assembly

67. Flow-through turbine with turning blades

68. This is this low- pressure turbine.

69. Wing flutter, metal fatigue, turbine failure.

70. A water turbine drives the generator.

71. Method for producing coated turbine blades and blade ring for a rotor of a turbine with axial flow

72. The turbine further has a variable turbine geometry so that the intake section can be adjusted as required.

73. Much like the Autoclave, the steam digester used confined steam to generate pressure.

74. Steam Cleaners constitute a broad category that includes canister steam Cleaners, vapor Cleaners, carpet Cleaners, portable spot Cleaners, and upholstery steam Cleaners

75. Combustion chamber arrangement for damping thermo-acoustic oscillations, gas turbine and method of operating such a gas turbine

76. A wind power generation apparatus includes a wind turbine having an artifical mound adjacent to the wind turbine.

77. Bedrowse 215-629-0711 Turbine system require

78. The Complete Steam Bottler bundles this Filter-Finish-Bottler Pan with a Steam […]

79. Rotor in a turbine engine coupled to provide individual and separate access to respective assemblies of compressor and turbine disks

80. No steam can escape.