1. Cemented tungsten carbide (16), Silicon carbide (18)

2. Cree’s Wolfspeed product families include silicon carbide materials

3. Semiconductor heterostructures with crystalline silicon carbide alloyed with germanium

4. 'Silicon carbide' does not include cutting and forming tool materials.

5. Metallic/Silicon Carbide abrasive paper is not to be used.

6. This room is made of a silicon carbide-coated vibranium alloy.

7. Aluminum-silicon carbide composite body and method for processing the same

8. Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits

9. An abrasive aggregate including silicon carbide and a method of making same

10. Cree Wolfspeed is a powerhouse semiconductor company focused on silicon carbide and GaN technologies

11. Silicon carbide bipolar junction transistor comprising shielding regions and method of manufacturing the same

12. Cree Wolfspeed is a powerhouse semiconductor company focused on silicon carbide and GaN technologies.

13. The second hardest is Moissanite (Silicon Carbide) at 9.25 barely beats Corundum's hardness of 9.0

14. An archaic term, typically associated with silicon carbide Arresters, describing the peak voltage for operation

15. The active layer is provided on the buffer layer (21) and is formed of silicon carbide.

16. 21 Production launch of silicon carbide particulate filters for the PSA Peugeot Citro? n diesel vehicles.

17. The shelves and towers can alternatively be made of other materials such as quartz and silicon carbide.

18. A method of polishing a workpiece with an abrasive segment comprising abrasive aggregates having silicon carbide particles

19. This paper presents a three-dimensional (3-D) wire Bondless power module using silicon carbide (SiC) power devices

20. Remet supplies Crucibles, ladle liners and other special shapes in alumina, fused silica, silicon carbide, and zirconia compositions

21. The three materials were Silicon Carbide, high strength Cordierite and Aluminum Titanate, while the filter design met specific goals.

22. RHI offers the entire product line of different refractories such as magnesia, magnesia-chrome, alumina-chrome, silicon-carbide, etc.

23. Silicon carbide is much harder than concrete, so it Abrades the surface easily, but won’t remove your cream finish

24. The ceramic compositions can also be admixed with supplementary ceramic materials such as silicon carbide to produce microwave absorbing materials.

25. Traditional Ceramics are made of clay and other natural occurring materials, while modern high-tech Ceramics use silicon carbide, alumina

26. General rust Blueing instructions (individual products may vary): Use silicon carbide paper up to 320 grit to prepare the steel

27. Silicon carbide Crucibles are suitable for smelting and melting precious metals, base metals and other metals in an induction furnace

28. TTZH is delivering various grades of tungsten carbide, silicon carbide, silicon nitride, aluminum oxide, etc. according to customers’ drawings and sketches.

29. Boride stones are made of aluminum oxide, with the exception of CS-HD series stones, which are made of silicon carbide

30. The abrasive segment can include a plurality of abrasive aggregates that include silicon carbide particles bound together in a binder material.

31. The method is provided for contacting a p-type conducting silicon carbide with a material which at least contains nickel and aluminum.

32. The refractory material for a circulating fluidized bed combustion boiler, according to the present invention, comprises silicon carbide (SiC) unlike conventional refractory materials.

33. In a particular embodiment, abrasive aggregates can be formed from a mixture including silicon carbide particles, a binder material, and a liquid carrier.

34. Designed for applications requiring fi ne fi nishes or light cleaning, the General Unitized Wheel Silicon Carbide MED See page 1 for Convolute vs

35. An abrasive article can include an abrasive aggregate with the abrasive aggregate having a plurality of silicon carbide particles bonded together by a binder material.

36. An Acheson graphite crucible Brasqued with magnesite; a similar crucible Brasqued with alundum; a similar crucible Brasqued with 50 parts of magnesite and 50 parts of alundum; a crucible made of silicon-carbide tubing bonded with carbon, with a graphite bottom luted in place with silicon carbide and water glass, and the inside of the crucible

37. Bodhisattwa Samanta Master of Science in Electrical Engineering In this paper, we present a physics based analytical modeling and simulation of ion implanted silicon carbide Schottky gate FET

38. Cree announced plans in September to build a $1 billion, 200 mm silicon carbide wafer fabrication facility at the Marcy Nanocenter, the largest facility of its kind in the world

39. "Cree's Wolfspeed business is a global leader with 60%+ share in substrates for Silicon Carbide (SiC) -- the next-gen material driving efficient power conversion in battery powered EVs and

40. Cutting machines for semiconductor substrates made of sapphire, silicon, silicon carbide, glass, crystal, lithium tantalite, gallium arsenide, indium phosphide, gallium nitride or aluminum gallium arsenide and bonded wafers of these substances

41. Cree’s Wolfspeed product families include silicon carbide materials, power-switching devices and RF devices targeted for applications such as electric vehicles, fast charging inverters, power supplies, telecom and military and aerospace.

42. Abadan Silicon Carbide and Aluminum Oxide Production Complex (Abasic) is one of the newest SiC manufacturers in the world and the only production complex of it's kind in the Middle East.

43. Chip-on-Board or "Cob" refers to the mounting of a bare LED chip in direct contact with a substrate (such as silicon carbide or sapphire) to produce LED arrays

44. According to the invention, at least one of the contact surfaces is at least partially comprised of highly-doped conductive diamond, silicon carbide, gallium nitride, boron nitride, aluminum gallium nitride, and/or aluminum nitride.

45. 3¿ and subjected to the thermal treatment in a burning regime under a pressure of 0.05-1 MPa with subsequent separation of the silicon carbide powder and the slag by means of a mineral acid.

46. Chemicals used in industry, science and photography, as well as in agriculture, horticulture and forestry, in particular silicon carbide, combustion residues from power plants, colloidal silicon dioxide, titanium oxides, calcium oxide, agglutinants for concrete, catalysts

47. (88) The downstream industry is mainly active in three different market segments: the abrasive segment (i.e. polishing applications), the refractory segment (i.e. lining in furnaces) and the metallurgical segment where silicon carbide is used as an alloy.

48. Abasic manufactures Silicon Carbide in Crude, Macro Grits, Micro Grits, and Powders to suit many industries and applications including Refractories, Ceramics, coated and bonded Abrasives, Cast iron and steel additives, wire sawing for silicon chips and as semiconductor material.

49. Said molding compound is characterized particularly by the fact that the molding compound is formed from more than about 50 percent by weight of silicon carbide (8) and less than about 50 percent by weight of aluminum silicate (12).

50. A water-based polishing slurry for polishing a silicon carbide single crystal, wherein the slurry comprises abrasive particles having a mean particle size of 1 to 400 nm and an inorganic acid, and the slurry has a pH of less than 2 at 200C.

51. Additionally, Boride, carbide, and nitride materials have novel properties: gallium nitride (GaN) and silicon carbide (SiC), for instance, are third-generation semiconductors and have played an essential role in blue lasers and white lighting, whereas boron carbide (B 4 C) and cubic boron nitride (BN) are the hardest known materials aside from

52. Refractory products of all kinds, namely, refractory grain, refractory flour, refractory brick, refractory mortar, refractory brick in plastic form, refractory castable mixes, pouring pit refractory, alumina refractory, zirconia refractory, silicon carbide refractory, insulation cement, refractory tile, refractory gunning mix, plastic refractory material, ceramic fiber modules and ceramic refractory material in preformed shapes

53. In order to produce the mounting body (40), a base body (20) comprising at least partially tungsten, carbon, silicon carbide, boron nitride, beryllium oxide, or aluminum nitride is provided on at least one of the exterior surfaces (21, 22, 23) thereof with a metal layer (31) of at least one of the metals copper, silver, and gold by electrochemical coating.