1. mounted on a machined aluminum alloy support,

2. Oak guncase edging, pre machined with Baizing line

3. PING Armlock putter grip; Includes headcover; Solid Machined Face

4. The edge must be machined down to 0.02 millimetres.

5. The edge of the disc had been machined flat/smooth.

6. Steel can be machined from a single Billet block just like aluminum.

7. BMF fabricates and installs Berthings, galleys, mess decks, offices, and machined cabinetry

8. The Bedplate and block are line honed and machined as one piece

9. The following surfaces of Bedplates are machined: (a) Top for frame attachments

10. Strange Axles are CNC machined to custom lengths and available with 28

11. Castings are machined on either special-purpose reaming machines or turret lathes.

12. The Crosstie ® System is available in either PEEK or machined cortical allograft

13. These carbide Burs remove sharp edges, unwanted projections, and excess material from machined

14. DeBurring tools remove unwanted projections, ragged edges, and other surface imperfections from machined workpieces

15. Fun non-tech machined Corkscrewy bermed generally downhill trail down a steep ridge

16. AR-15 and AR-10/308 Barrels Cut and Machined from High quality Steel

17. The aluminium parts are machined by dry operation or with minimum quantity lubrication respectively.

18. When we clamp this accurately machined slug at 300 psi and check for deflection

19. In all test pieces containing a weld, the weld is machined to trim the surplus

20. Seawater resistant aluminium alloy, machined from block, extreme surface hardening and corrosion resistance through HardCoating.

21. Our precision machined Crankshaft kits meet manufacturer specifications and come with a limited time warranty.

22. Has delivered the highest quality cnc-machined Billet aluminum badges & emblems available since 2003

23. Modern Cannon are complex mechanisms cast from high-grade steel and machined to exacting tolerances

24. We also offer our Pro Series Baseplates which feature machined throttle shafts, throttle plates, hi …

25. assembled on a machined aluminum alloy support, of a kind used for thermal imaging cameras

26. In all test pieces containing a weld, the weld is machined to trim the surplus.

27. assembled on a machined aluminium alloy support, of a kind used for thermal imaging cameras

28. Abrading is a process in which graphite is 3-dimensionally machined using an abrasive cutting process

29. assembled on a machined aluminum alloy support, of kind a used for thermal imaging cameras

30. Carbide Burs are finishing tools that remove sharp edges, unwanted projections, and excess material from machined workpieces.

31. The Blackbird is a modern, double-edge safety razor designed, machined, and finished in the United States

32. Carbide Burs are finishing tools that remove sharp edges, unwanted projections, and excess material from machined workpieces

33. We then completely modify it with our custom CNC machined parts to be the ultimate Breaching Shotgun

34. Abs (acrylonitrile-butadlene-styrene) is a low-cost engineering thermoplastic that is easily machined, fabricated and thermoformed

35. Manufacturer of Avicenna brand laser machined components and engineered assemblies for catheters, sensors, and electrical stimulation leads

36. A Countershaft, carrying two 20° involute tooth gears, is machined to a diameter of 1.25-in

37. Cutthroat Broadheads are machined out of one piece of steel to obtain maximum strength and consistency.

38. 2003-2019 Honda Ruckus NPS50 50CC CVT Cover Ankle biter Laser Cut and Machined Brand: Kage

39. Micro-machined multi-sensor providing 1-axis of acceleration sensing and 2-axes of angular rate sensing

40. Mechanics pushed our aircraft into a hangar and machined us a new stud for our exhaust pipe.

41. Available in 5” (standard Biter) and 8” (Long Dog Biter) lengths; Quality Machined Steel; Use with Biter Head – …

42. The screw slots are machined in the form of a T and are provided in the replaceable head.

43. Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors

44. Parts to be machined are moved from one machining centre to the other through a rotary table.

45. The block is machined by the platform to include scribe lines for facilitating proper alignment of lens blank.

46. Dba PCC Aerostructures Accra is a world class machining, fabrication, and assembly supplier of precision machined parts and assemblies

47. Brazed fittings are made from multiple, pre-machined components that are combined together, resulting in a finished part

48. These Axles are non-tapered, with hardened bearing seats and machined c-clip grooves, to fit OEM applications

49. CNC machined from a wafer thin strip of ultralight aluminum, the Iain Sinclair Cardsharp4 Knife has ultimate robustness and strength

50. It includes a complete exhaust system with tips machined from billet aluminum, now relocated to the top of the body.

51. We also offer our Pro Series Baseplates which feature machined throttle shafts, throttle plates, hi-flow screws, and plugged vacuum ports

52. Each Albm is precision-machined in the Mountain West, making it stronger and longer lasting than any other aluminum ball mount

53. The box, of a simple design, machined in a grade 5 titanium block plays on contrasts between brushed and polished Bevellings

54. Machined Bones Allografts is considered an effective medical procedure to treat back problems, and it is widely accepted worldwide by patients

55. The M-15 comes with a 10" free-floating tactical Key-Mod handguard, machined from solid aluminum in Armalite's factory.

56. Other milled-receiver AKs are machined from bar stock, but Arsenals hot-die hammer forging produces stronger and finer-grained steel

57. Each Crankshaft kit is precision machined, inspected, and tested to meet manufacturer specifications and comes with main and rod bearings

58. Machined from a single piece of 7075-T6 aircraft-grade aluminum, our Backcountry mounts offer a lifetime of rugged performance.

59. Aeon Flow 2 replaces a cast aluminum baffle with a carbon fiber and machined aluminum design that is more rigid yet lighter

60. The Couplers are machined to have taper threads at both ends, creating a mechanical butt splice of two sections of reinforcing steel

61. Broaching is a machining process that pushes or pulls a cutting tool (called a broach) over or through the surface being machined

62. The box, of a simple design, machined in a grade 5 titanium block plays on contrasts between brushed and polished Bevellings

63. The Bantam Sofa (2004) celebrates the soft, less-machined brand of modernism that arose in the United States in the 1930s

64. Once hammered, Cymbals move onto the lathe, a spinning wheel where Cymbals are hand-tooled or machined to form grooves along their surfaces

65. The headless (blind) Assortment features a wide variety of coarse and fine sizes, all with machined helical threads and a black oxide finish

66. The Konig Centigram is a 5-spoke design with a machined PCD utilizing Konig's unique "DNA" PCD featuring dual lightening holes

67. EMF's 1873 Great Western II "Californian" guns feature hammer forged steel barrels and frames that are drop forged and then CNC machined

68. Machined, laminated, foundry, shaped, wrought and semi-wrought goods of all kinds based on aluminium, copper, lead, tin, zirconium and their alloys, sintered materials

69. The design of the aero servo aileron hinges are machined from solid billet and have a self aligning ball bearing pressed into the arm.

70. All AFTCO fishing rod Butts are swaged and machined to create a high strength-to-weight ratio never before seen in offshore fishing rod handles

71. German Busch® Burs are made of tungsten vanadium steel, precision machined to form the highest quality, most recognized brand of Burs in the world

72. 30 Generally speaking, bars of steel, forging, castings, etc. are machined to the required shape and size with only one roughing and one finishing cut.

73. Argus Corporation is an experienced full-service supplier providing vehicle services, material handling equipment, machined parts, and vehicle wiring harnesses to companies across North America

74. For practical use, a Biomaterial should be amenable to being formed or machined into different shapes, have relatively low cost, and be readily available

75. EK-Vector Radeon VII Backplate is a CNC machined retention Backplate made from black anodized aluminum for EK-Vector Radeon VII series water blocks

76. Shield Arms Standard (SAS) Pre-Cut Slide for Glock® 43/43X, machined to accept Holosun 507k, comes with Black DLC steel cover plate

77. For more than 35 years Cab Incorporated has been a preeminent leader in its markets: - Steel pipe flanges for the waterworks, oil and gas, and specialty industrial market - Machined and un-machined cast and forged iron and steel components in a variety of industries - Wind tower flanges and door frame components for utility scale wind farms

78. All American pressure Canner features the exclusive precision machined metal-to-metal sealing system.It allows the cover of the cooker to seal perfectly without the gasket

79. This dedication to quality is why you will find only the best Centrifugally cast products in iron, nickel, cobalt or copper-based alloys and machined products .

80. Example of a partial Bohi Finally, the point where the groove terminates: most mass produced swords have the groove machined out which produces a rounded termination …