1. High strength adhesives with impact peel strength

2. With high ductility and impact strength . E . g . Automotive safety parts.

3. • measure the impact strength and heat deflection temperature of moulded parts,

4. Polypropylene Copolymer is a bit softer but has better impact strength

5. Flexible Casting and Coating Resin with high impact strength and abrasion resistance.

6. WEICON Urethane - flexible casting and coating resin with high impact strength and abrasion resistance.

7. The laminated rubber-like posts have excellent strength, impact and vibration absorption, and machinability.

8. with regard to the impact strength and the bending coefficient, see Appendix A.#, marginals # to

9. Then water plasticization was the leading role. It made the material ductile and increased the impact strength.

10. ABS offers a good balance of impact, heat, chemical and abrasion resistance, dimensional stability, tensile strength, surface

11. Ultrahigh-strength gas metal arc welded joint having excellent impact toughness, and solid wire for producing same

12. The Brittleness manifests as a minimum in the ductility and impact strength as a function of temperature.

13. Secondly, it strengthens the financial strength, increases capital profit, and improves impact of finance upon national macroeconomic control.

14. Super high-strength flux cored arc welded joint having excellent impact toughness, and welding wire for manufacturing same

15. High strength welding joint having excellent impact toughness at very low temperature, and flux-cored arc welding wire therefor

16. The influence of maximum aggregate size, water-cement ratio, cement content, cement type and quality, specimen humidity, static compressive strength and loading/casting direction upon the uniaxial impact tensile strength was studied.

17. Aberrator strength and spatial frequency content markedly impact the desirable operating characteristics and performance of these methods for improving image quality

18. Atomized (finely powdered) metals can be added to Acraglas Gel to increase both tensile and compression strength, along with higher impact resistance.

19. Regression analyses were performed and empirical relationships between the strength of rocks (in terms of their compressive strength and point load indices) and aggregates (in terms of their crushing, impact and abrasion values) were developed.

20. Provided are a high strength welding joint having excellent impact toughness at very low temperature, and a flux-cored arc welding wire therefor.

21. The flexural modulus, abrasion resistance and all of the other secondary properties including: tensile strength, izod impact strength, coefficient of thermal expansion and coefficient of friction were tested August 31, 2005 Page 36 of 59

22. Description: Schott AS 87 eco is an ultra-thin Aluminosilicate glass with extremely high levels of bending and impact strength and superior scratch resistance

23. The results indicate that the strength characteristics of aggregates – in terms of crushing, impact and abrasion values – can be estimated and predicted from simple and quick tests for rock strength such as the Schmidt hammer and point load.

24. GIRLS Aero IMPACT GUYS Aero IMPACT

25. These include tensile strength, wet and dry tear strength, burst strength, air permeability, seal strength and integrity.

26. Key words: concrete, accelerated strength, tensile strength, admixtures, curing, splitting tensile strength, modulus of rupture, strength correlations.

27. Argos goes from strength to strength

28. The bending strength of glulam depends on both board strength and finger joint strength.

29. Impact of moving to full accrual Modified accrual Accrual impact Reclassi- fication Net impact Full accrual

30. Cellulose Acetate Butyrate (CAB), commonly known as Butyrate, is resistant to ultraviolet rays, has a lower moisture absorption than acetate and has an extremely high impact strength

31. We need to respond to strength with strength.

32. • The flexural modulus, abrasion resistance and all of the other secondary properties including: tensile strength, izod impact strength, coefficient of thermal expansion and coefficient of friction were tested on several blends of each of these additives at a variety of loading levels.

33. Strength and Agilities-one on one strength and Agilities

34. Those who do will go ‘from strength to strength.’

35. Adopters have committed to the Impact Investing Institute’s Impact Investing Principles – and advancing the impact investing agenda.

36. The adhesive compositions improve dynamic shear strength, dynamic peel strength, as well as static peel strength.

37. Impact wrenches

38. There are three security control Baselines (one for each system impact level—low-impact, moderate-impact, and high-impact), as well as a privacy baseline that is applied to systems irrespective of impact level

39. There are three security control Baselines (one for each system impact level: low-impact, moderate- impact, and high-impact), as well as a privacy baseline that …

40. Re= yield strength in N/mm2, or 0,2 % proof strength or, for austenitic steels, 1 % proof strength;

41. The intermediate layer and the second jacket provide increased impact resistance, cut-through resistance, and compressive strength, as well as increased resistance to abrasion and other frictionally induced damage.

42. Brittleness describes the property of a material that fractures when subjected to stress but has a little tendency to deform before rupture. Brittle materials are characterized by little deformation, poor capacity to resist impact and vibration of load, high compressive strength, and low tensile strength.

43. Small 22 Pound Anvil; Made from high strength cast steel with high impact toughness; Tensile strength is 87,000 PSI; Rockwell hardness 45-55; Each Anvil features two holes, a Hardy hole (square) for holding tools and a Pritchel hole (round) for creating holes in metal.

44. See also: and, Awkwardness, by, main, strength main strength and Awkwardness Pure, unreasoning force of strength; brute force

45. Additives for ceramic tile adhesives, ceramic tile cements and cement mixes to enhance their flexibility, flexural strength, tensile strength, sheer adhesion strength, mechanical strength, and abrasion resistance

46. Brace for impact.

47. Admixtures for ceramic tile adhesives, ceramic tile cements and cement mixes to enhance their flexibility, flexural strength, tensile strength, sheer adhesion strength, mechanical strength, and abrasion resistance

48. [ 2010 June: Learn more about impact Cratering on Deep Impact scientist Jim Richardson's blog Explorations in Impact Cratering.] Cratering - First Impressions.

49. By main strength and Awkwardness By sheer force or physical strength

50. Impact drivers, impact wrenches, torque wrenches, socket drivers, socket wrenches, sockets (machines)

51. Ananda Impact Ventures is one of the leading impact investors in Europe

52. Weakness to Strength

53. SP 800-53B includes three security control Baselines (one for each system impact level: low-impact, moderate-impact, and high-impact), as well as a privacy control baseline that is

54. SP 800-53B includes three security control Baselines (one for each system impact level: low-impact, moderate-impact, and high-impact), as well as a privacy control baseline that is

55. The goal is zero impact above ground and near-zero impact below.

56. Union is strength.

57. Actual strength (average)

58. Actual alcoholic strength

59. 1.1 Alcoholic strength:

60. His strength returns.

61. Actual alcoholic strength:

62. Save your strength.

63. Maintaining Spiritual Strength

64. Unity is strength!

65. Weakness compels strength.

66. Bold wallpapers, such as Byronian Hills are going from strength to strength

67. Swiftness and certitude require strength, and the man had not this strength.

68. Possible qualitative changes were observed by determining bending strength and crushing strength.

69. Strength without love produces the brute. Love without strength produces the weakling.

70. India has been relatively better placed in terms of the impact of the global financial crisis on account of three factors: the inherent strength of its economy, the strength of our domestic consumption and the government's effective action in terms of fiscal stimulus, growth packages and monetary policies.

71. direct impact means the impact of products that actually consume energy during use

72. Key words: code calibration, geometric properties, reliability, steel, tensile strength, yield strength.

73. Amercements: impact and meaning

74. Impact on daily life

75. Blackcap Admix Contractor Strength provides increased strength, resiliency and compressive and tensile PSI

76. Impact on accrued liability

77. On its own terms, meanwhile, the new philology went from strength to strength.

78. 17 Strength without love produces the brute. Love without strength produces the weakling.

79. 20 Standing on the defensive indicates insufficient strength ; attacking , a superabundance of strength.

80. Tinting strength refers to ink stain, strength, commonly known as innovative ink parmacokinetics.