1. Tracking error signal detector

2. An error-code-adding error correcting circuit (60) error-corrects the EFM demodulated signal and adds error codes.

3. Error calculating means (15) calculates the error (En) between the speech signal (Sn) and the reproduction coded speech signal (Sna).

4. The signal to noise ratio of data signal and tracking error signal are improved at the same time.

5. 6 The error rapidly decreases after regaining the GPS signal.

6. It is possible to filter the PV or error signal.

7. Integrated circuit, optical disc device and tracking error signal generating method

8. The output of the adaptive filter is then subtracted from the received signal to produce an error signal.

9. 8 Precision of GPS location is effected by many elements. Major error origins are error related with GPS satellite, error related with signal propagation and error related with accepting equipments.

10. Thus, an accurate tracking error signal can be obtained by an inexpensive apparatus.

11. An adder (4) subtracts the prediction signal P from the current pixel value and calculates a prediction error signal M.

12. The central controller broadcasts the overall error signal to all the cellular units uniformly.

13. An error signal is generated when the control data lies outside the admissible data range.

14. The adder (204) is configured to subtract a predicted error from a phase profile signal.

15. A telegraphic signal, improperly interpreted, owing to the fog, was the cause of this error.

16. The system also includes an integrator (108) to accumulate an error resulting from the combination of the input signal and the feedback signal.

17. For example, a parity bit or other error management method can be inserted into the signal path.

18. This error signal is insensitive to variations in angular alignment between the beam and the diffraction grating.

19. Based on an error signal obtained by subtracting the pseudo echo signal from the picked up sound signal by an adder 12, the adaptive filter 11 sets a more optimum filter parameter, and generates the next pseudo echo signal.

20. A first signal error detector (106) finds a frequency error based on an average phase difference of predetermined correlation vectors, and finds an absolute phase error based on transition of absolute phase of predetermined correlation vectors.

21. The feedback amplifier applies the measured phase error as a DC offset to an AC differential clock signal.

22. Due to dynamic and static deviations of the speed signal an accumulation of a position-error is unavoidable.

23. Bit error rate (218) and SNR (223) are monitored by receivers to develop a measure of signal quality (220).

24. A precalculated table stores information relating output signal distortion to expected Error Vector Magnitude (EVM) at the radio receiver.

25. A signal TW is thus present which does not assume its maxima and minima across the scanning location x at the same places as the track error signal TE.

26. Any difference between the actual and wanted values (an "error signal") is amplified (and converted) and used to drive the system in the direction necessary to reduce or eliminate the error.

27. A second input of the digital adderreceives a negative digital error signal and the output of the digital adder provides a digital capacitance measurement signal corrected for an error current which is integrated across the reference capacitor in the gain mode due to the slewing of the operational amplifier.

28. A pulse-cross is the representation of normally invisible portions of an analog video signal on a studio screen for error analysis.

29. Aliasing definition: the error in a vision or sound signal arising from limitations in the system that Meaning, pronunciation, translations and examples

30. Use of such algebraic sign information (rather than full error signal values) greatly simplifies the circuitry needed to determine the tap coefficients.

31. Each transceiver monitors the quality of the channel by assessing the strength of the received signal, or the bit error rate, or both.

32. Jitter and misplace of the bit synchronization signal will reduce the anti-interference performances of communication equipment directly, also increase bit error probabaility.

33. Traditional stabilization precision measuring method is of great randomness because of the manual selection of angle error signal, which effects the measuring precision.

34. If signal strength and/or bit error rate are not within a predefined expected interval, an alarm is given in the base station controller.

35. Based on PIGA s error models, The effect of inertia system fix error angle to instruments static error models, dynamic error models and amalgamate error models were analyzed.

36. Busboy.on('error', (err) => { debugLog(options, `Busboy error`);

37. 24 Based on CC1000 wireless sensor networks development platform, the odometer location error is corrected by measuring RSSI parameter and using maximum signal method.

38. Busboy.on('error', (err) => { debugLog(options, `Busboy error`);

39. It was a diabolical error, a schoolboy error.

40. Redirect error: The URL was a redirect error.

41. According to the invention the accident detector (1) of the occupant protection system carries out an internal error control and, in the case of error detection, generates a permanent status signal which is sent to a control device (4).

42. 4 It was a diabolical error, a schoolboy error.

43. libical error

44. Decryption error

45. 24 A prediction error signal and a motion vector for a current block are transmitted, describing the location of the predictor block in the reference picture.

46. Syntax error

47. In other embodiments, the threshold may be based upon an absolute or relative predictor error of the signal once the basis function (filter) has been removed.

48. The author brings forward the method dispose of error for gyroscope trend item cause of north seeking error, and analyzes latitude error and two pose angle error.

49. Decision feedback equalizer ("DFE") circuitry bases determination of the coefficients that are used in its various taps on the algebraic sign of the current value of an error signal and prior serial data signal values output by the DFE circuitry.

50. Aperiodic Signal Non-periodic Signal

51. One commonly distinguishes between the relative error and the absolute error.

52. The principle analysis of error and undesired signal has been done at great length, and relevant way to solve it has been adopted in the paper, too.

53. KFormula Import Error

54. Syntax Error near " %# "

55. A rounding error

56. Error in syntax

57. Hierarchy request error

58. Error deleting layers

59. • Accidents are often attributed to human error (navigation or pilotage error).

60. A missing revision of the error is considered the actual treatment error.

61. Dump Certificate Error

62. Signaled system error

63. Discard timer error

64. A rounding error.

65. Date/Time Error

66. Digital signal processing and analog signal processing a subset of signal processing.

67. Error formatting track %

68. ERROR: Unknown protocol '%# '

69. The meter is arranged to monitor signals received by the antenna and to provide an indication of correct alignment of the antenna with a desired signal source when a signal of a predetermined frequency, polarization, symbol rate and error correction ratio is received.

70. Error Absolute Error The value registered by the meter minus the true value.

71. The ratio of the absolute error to the true value. (c) Percentage Error.

72. Error data based on a plurality of the computed error values is accumulated.

73. A differential signal is formed between a first channel signal and a second channel signal of a PCM signal input.

74. Signal processing system and signal processing method

75. Error while decoding track %

76. Syntax Error: Unknown command '%# '

77. ERROR: Invalid WAIT command

78. The acoustic signal and the at least one refracted signal form a received signal.

79. Dummy error addition circuit

80. Error while normalizing tracks