Use "coating" in a sentence
1. Coating activities (coil coating):
2. Coating activities (vehicle coating industry):
3. Coating activities (leather and winding wire coating):
4. Method for coating and film-coating fine powders in a fluidised bed coating unit
5. 5% missing coating permitted Circumferentially on edges of coating
6. Coating activity
7. Watson Coatings specializes in Dip Coating and Flow Coating applications
8. Conventional coating methods may be used to make the fabric, including knife coating, spray coating, and calendaring.
9. The Baryta coating is applied underneath the top glass powder coating
10. Liquid-repellent coating composition and coating having high alkali resistance
11. Road coating materials
12. Cementitious coating is a two component, thixotropic, Cementitious modified polymer coating
13. Traditionally, lac coating, alkyd varnish, nitro - varnish, acrylic coating are used.
14. Method for making an acoustic treatment coating and coating thus obtained
15. The clear- lacquering coating of the clear- lacquering coating that in abroad transparent and pulverous coating already used car automobile body and car.
16. Anti-adhesive coating agents
17. Damp proofing compositions (paints), fire retardant coating compositions (paints), protective coating compositions (paints)
18. Phosphate coating, or “Parkerizing”, is a commonly found process for coating steel Barrels
19. Airless spray-coating of a surface with a viscous aqueous architectural coating composition
20. Fire-proof cement coating
21. Often referred to as Aluminising, re-Aluminising, coating, re-coating, silvering or re-silvering
22. A coating material is used for coating a substrate by means of laser ablation.
23. When physical coating approaches are used, the Biopolymer is deposited directly onto the substrate via a technical process, e.g., spin coating, dip coating, electrospinning, vapor transport, etc.
24. Alloy coating of cast iron
25. The coating is then cured and optionally activated by subjecting the coating to alkaline conditions.
26. The high humidity coating process is achieved by addition of water to the coating chamber through dilution of the coating formulation or humidification of inlet air.
27. Coating activities do not include the coating of substrate with metals by electrophoretic and chemical spraying techniques.
28. Actinic radiation-curable coating composition
29. Waterborne acetoacetate-functionalized alkyd coating
30. Abrasive discs with diamond coating
31. Blasting and coating for machinery
32. Stent coating with gradient porosity
33. Anti-thermal low-IR coating.
34. A plastic coating repels moisture.
35. HLS Cannulae with BIOLINE Coating or SOFTLINE Coating are available for applications in circulatory and pulmonary support
36. Machine components, namely modular coating heads in coating installations for hot-melt adhesives and dispersion adhesives
37. Anti-glare coating composition and anti-glare coating film having superior abrasion resistance and contamination resistance
38. It is a much thicker and harder coating than a standard Anodize coating, and is not usually dyed
39. Hand-operated apparatus for applying damp-proofing compositions, fire retardant coating compositions or protective coating compositions to buildings
40. Enossal implant comprising an anatase coating
41. Articles coated with abrasion resistant coating
42. Intermediate coating between component and functional coating; responsible for good adhesion to bulk material, can reduce stresses by equalizing different thermal expansion properties of coating and bulk material.
43. Testing coating Adhesion will not only help to detect potential coating failure but also define physical properties
44. Low refractive index composition, abrasion resistant anti-reflective coating, and method for forming abrasion resistant anti-reflective coating
45. A method for spray-coating a surface with the coating composition by airless spraying is also disclosed.
46. The inventive method for corrosion preventive coating for metal consists in applying the coating to the surface of a metal and machining said coating by a rotary abrasive disk.
47. — Crisped rice in a chocolatey coating
48. Oxidation resistant coating for titanium alloys
49. Aminoplast resin film for coating substrates
50. Fingerprint- and smudge-resistant oleophobic coating
51. Remedy is a Adscititious coating agent
52. Alkyd resin emulsions for coating varnishes
53. Amalgam balls having an alloy coating
54. Endoprosthesis having an active substance coating
55. Coating capsules with active pharmaceutical ingredients
56. Abrasive material having an antiloading coating
57. Low friction, abrasion resistant polymer coating
58. 9 A plastic coating repels moisture.
59. Alginates provide a better coating runnability than other similar compounds/products, specifically in hot, on-machine coating applications
60. All suitable for coating aluminium sheetings, galvanised steel sheet and for coating metal doors and metal window frames
61. The silicone-based hard coating is an abrasion resistant coating with hardness ranging from 1 to 10 gigaPascals.
62. - in the case of coating plant: coiling machines, accumulators, and tanks or cells used to apply the coating,
63. Reactive diluents and alkyd resin coating compositions
64. Coating, Engraving, Heat Treating and Allied Activities
65. For off-line coaters: production after coating.
66. Electrode mixture paste coating method and coater
67. Semitransparent coating method with improved abrasion resistance
68. Spread mustard coating evenly over browned rabbit.
69. In general, the underwater hull coating system consists of an anticorrosive coating and one or more Antifouling topcoats
70. The coating may be conformable coating and may provide a hydrophilic membrane that has high water flow rates.
71. Emissions from the coating process include VOCs (solvents), metal fumes, acid aerosols (electrolytic coating), particulate, and combustion products.
72. Thermo-mechanical fatigue resistant aluminum abradable coating
73. Optical element comprising a double-refractive coating
74. The coating is applied to a first roller (40) and coating thickness (162) is limited by a knife blade (170).
75. Glass paper, sandpaper, abrasive sheet metal, metal covered with an abrasive coating, metal sheet covered with an abrasive coating
76. As eBay discusses, some manufacturers offer metal Colanders with an enamel coating or a rubberized coating, so it can have a
77. Use of isotropic etching for anti-reflective coating removal eliminates thermal shock associated with heated acid bath anti-reflective coating removal.
78. A single-component, rust-inhibitive Alkyd coating
79. Intermetallic compound component with diffused aluminium coating
80. Acrylate-based coating composition containing fluoromodified polymers