Use "battens" in a sentence
1. Battens Explore our wide range of Battens to complete your space
2. Battens are simply push-clicked onto mounting tracks that are positioned behind the Battens in a concealed manner
3. Battens,FAA Written (Knowledge) Test Preparation
4. Battens Solicitors Limited is Registered in England
5. Battener (plural Batteners) One who battens or feasts.
6. Battens used in flooring can be relatively large
7. Battens are the primary structure of a mainsail
8. On steep slopes, tiles are usually fastened to the Battens
9. Patness Aptnesses pattens fatness patines patnesses fitness peptones patens battens
10. Battens are made from seamless pipe and are supplied with a matte black finish; Battens up to 21′ (6.4 m) long are supplied as a single piece; longer Battens are provided with 18″ (457 mm) long internal splice sleeves; Standard 1-1/2″ (38 mm) Battens are provided with safety yellow vinyl end caps, making the batten ends easier to see
11. These Battens are used by many well-known sail lofts
12. ‘Battens were secured to the central rafter, allowing the weight of the tiles to displace the Battens, causing the tiles to slip.’ ‘Like a woven basket, the meshing together of the various elements - ribs, Battens and shingles - creates a strong, stable, composite structure.’
13. Some Battens enter from the luff, others from the leech so check to make sure that the closure system where the Battens have been inserted has been properly secured
14. Save More on Your Ultra Marine Teak Battens at Fisheries Supply
15. Battens should be wide enough to extend at least ½ inch
16. Battens Solicitors Limited is authorised and regulated by the Solicitors Regulation Authority
17. Western Red Cedar Square Edge Battens 44mm x 17mm Clear Grade 2 or Better – Western Red Cedar 10 Cedar Battens at a minimum of 1.83m long or 2.13m long
18. The tracks are fixed to the substrate prior to clipping on the Battens
19. Non-metallic roofing and underlays, purlins, battens, roof feedthroughs and seals, facade products
20. Shop our various sizes available to accommodate flat Battens of various widths
21. A C-Tech batten expert can guide you to choose the right Battens …
22. Shop, read reviews, or ask questions about Battens at the official West Marine online store
23. Then fix battens between the joists to take the edges of a piece of plasterboard.
24. Our Battens are planed on all sides and made from finest grade Western Red Cedar
25. The spacing of the Battens depend on the type of roofing material and are applied horizontally.
26. The closer together you space the Battens, the more dimensional and textured the installation becomes.
27. If the boards were 8-inches wide, then the Battens were installed 8 inches apart
28. CT40 Battens are made on custom mandrels and provide premium performance for the largest superyachts.
29. All RBS Battens come coded with either “F”, “C” or “R” to insure proper batten placement
30. The performance benefits of using Arched Battens are plenty when it comes to protecting your investment
31. Hold the new panel in place and mark for cutting 3 Carefully prise off the end battens.
32. A further use of carbon rod is for sail battens to control flutter, or to improve sail shape.
33. Anglian RoofCare can address all defects in roofs from changing tiles, felts and battens and cement degradation
34. Dual batten system A way of saying that the sail can use full or half length battens.
35. Sturdi-Battens can be installed only as often as required by your siding manufacturer's recommendations, meaning lower cost.
36. Battens owner, who was the person who came to look at my fridge, never actually diagnosed the problem
37. Battened and Ledged Doors: Battens are 100 mm to 150 mm wide and 20 mm thick wooden boards
38. 72 synonyms and near synonyms of Battens from the Merriam-Webster Thesaurus, plus 27 antonyms and near antonyms
39. ECONOMICAL: Save money using Sturdi-Battens instead of drainage mats, which must be applied to the entire wall
40. Roofing battens or Battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles.The spacing of the battens on the trusses or rafters depend on the type of roofing material and are applied horizontally like purlins.
41. Roofing Battens or battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles.The spacing of the Battens on the trusses or rafters depend on the type of roofing material and are applied horizontally like purlins.
42. You then take two stout battens and insert them below the pallet like the arms of a fork-lift truck.
43. This allows for slight positional errors during fixing - a couple of G cramps and some battens are helpful here.
44. RBS Battens continually works with sail designers to create a state of the art batten focused on reliable and consistent performance
45. Battens are also used in metal roofing to secure the sheets called a batten-seam roof and are covered with a
46. Battened member divided equally between parallel planes of the battens. Battened member carrying calculated bending moment due to eccentricity of axial loading, calculated end moments or lateral loads parallel to the plane of battens, shall be designed to carry actual shear in addition to the above shear.
47. The Battens use a simple push-fit connection to engage with the clips, resulting in fast installation and completely concealed fixings
48. Board and batten shutters are made from grouped single boards joined together with battens, which are shorter Crosspieces of wood
49. Batten down To close, fasten, or secure something with Battens, flexible strips of wood or plastic used to hold material down
50. Tapered Battens allow for a smooth transition from the sail to the leech resulting in better sail shape and sail longevity
51. Here is the lowdown on Battens and what you need to know to choose the right ones for your sailing needs
52. By raising the tiles, Arched Battens aid in extending the lifespan of the underlayment and other components by increasing drainage and airflow
53. Battens elevate roof tile above the roof deck and can be run either horizontal or perpendicular to the slope of the roof
54. True board-and-Batten is made with vertically installed wide boards and narrow Battens fastened over the gaps between the boards
55. Battens are an important part of the sail structure, but with many different options and different use cases, it can get confusing
56. Roofing battens or Battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles
57. Roofing Battens or battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles
58. Knotwood aluminum Battens come in a variety of shapes and sizes allowing the designer to conceive their own sequence using the available elements
59. Bardic provide solutions for Emergency Lighting in Australia, from exit lighting to emergency battens we can provide a full range of products to suit
60. Wood siding that consists of narrow vertical strips (Battens) installed over a flat base (board) is known, logically enough, as board and Batten.
61. Recmar Plastream sail Battens are made from an unbreakable, non-tapered plastic that is easy to cut and file to the perfect size
62. Knotwood Battens come in a range of sizes from 25×50 up to 250 x 50 and even larger with the batten joiner.
63. Battened door A wood door without stiles which is constructed of vertical boards held together by horizontal battens, 2 , on the back side
64. Traditionally, board and Batten siding starts with wide vertical planks (boards), which are then joined together by thin vertical strips (Battens) to cover the seams.
65. Battens can be used to support flooring finishes, similar to joists, but the batten rests on a solid sub-floor, creating a raised floor
66. Traditionally, board and batten siding starts with wide vertical planks (boards), which are then joined together by thin vertical strips (Battens) to cover the seams.
67. Batten (third-person singular simple present Battens, present participle Battening, simple past and past participle Battened) (intransitive) To become better; improve in condition, especially by feeding
68. At the time, fully Battened sails — especially full battens placed at the head of the sail — were becoming very popular among the performance one-design sloops
69. The Battens are strips of lumber, typically 1 to 3 inches wide, which are then nailed down to cover the joins where the vertical planks meet
70. RBS manufactures Battens for the full range of sizes, including everything from windsurfing and dinghies all the way to high-tech race boats and mega yacht cruisers
71. Horizontal Battens should also be installed so that there is a clearance of at least 6 inches between the batten and the valley to allow concentrated water flow.
72. Battens were tested to evaluate their capacity for being shaped and bent using steaming, a traditional boat-building technique, and the durability of joints was assessed through tension tests
73. Battener (current term) Batteners battening battens batter batter's box: batter's boxes batter bread batter up battercake battered battered child syndrome battered spouse syndrome battered women batteree; Literary usage of Battener
74. Using high quality pre-preg carbon fibre, the Battens are manufactured in custom solid aluminum female tooling using 6 bar of pressure to ensure aerospace quality lamination and minimum resin content
75. Battens that are located above a stage can usually be lowered to the stage (flown in) or raised into a fly tower above the stage (flown out) by a fly system.
76. As a basic yet uniquely attractive type of siding, it’s commonly used on barns across America, also granting it the name “barn siding.” Board and Batten siding uses strips of narrow wood called Battens.
77. The Stanilite ® range of emergency Battens provide the perfect solution for carparks, factories, warehouse and large commercial situations where you need the peace of mind that only a Stanilite emergency batten can provide.
78. The SEARS tech told me in the first ten minutes EXACTLY what my problem was, which was not even in the same ballpark of what Battens told me - which was a guess anyway because he didn't actually do anything but look at the fridge.
79. Profiled metal sheets, roofing of steel and parts thereof, roofing sheets, sheet metal, corrugated sheets, purlins, battens, beads, gutters, eaves, spouting, rails, rainwater systems, roof feedthroughs, screws, hooks and other fixing accessories, ladders, snow guards, bridges and roof safety products made of steel, facades of metal sheets, facade products
80. He calls it 'Battening of the hatches' but it is clearly the same expression: “Battens of the hatches: Long narrow laths serving by the help of nailing to confine the edges of the tarpaulins, and keep them close down to the sides of the hatchways in bad weather.”