1. Amount of intake air CO2 per mole of intake air

2. Furnace air intake?

3. air-intake pipes

4. Air intake plenum for air induction channel

5. Intake air temperature (K)

6. Method for control of air intake and valve for air intake and its application

7. Amount of water in the intake air, based on a humidity measurement of intake air

8. Absolute throttle position/intake air throttle position (position of valve used to regulate intake air)

9. absolute throttle position / intake air throttle position (position of valve used to regulate intake air)

10. Absolute throttle position / intake air throttle position (position of valve used to regulate intake air)

11. Hydropneumatic anti-hammer tank with an air intake and control device, and air intake method

12. An intake tube extends from the housing for receiving intake air.

13. Intake system with air filter

14. - air vents and intake valves,

15. clean air (ambient air, intake air, charge air, inlet manifold) temperature sensors;

16. Check air-intake level, 8 seconds.

17. Intake manifold air leak: A lean condition due to an intake manifold air leak can cause Backfiring.

18. Air intake valve (7), if fitted

19. Air intake valve (3), if fitted

20. Relative humidity of the intake air

21. Absolute humidity of the intake air

22. Combination valves for controlling intake air

23. Engine air intake shut off valve

24. Absolute temperature of the intake air

25. relative humidity of the intake air ( %)

26. Absolute humidity of the intake air.

27. For the intake air (if different from the dilution air):

28. (ii) clean air (ambient air, intake air, charge air, inlet manifold) temperature sensors;

29. Idle air intake control device of engine

30. humidity of the intake air water per kg dry air

31. Air intake systems, including air cleaners and filters for cleaning air for engines

32. Ra= relative humidity of the intake air, %

33. — Air intake valve if fitted equipment (5)

34. humidity of the intake air, g water per kg dry air

35. humidity of the intake air, gram of water per kg dry air

36. Engine intake system with accessible, interchangeable air filters

37. humidity of the intake air in g water per kg dry air

38. absolute humidity of the intake air, g water per kg dry air

39. Dry intake air density = 1.293 kg/m3 with

40. Intake air mass flow rate on dry basis

41. Air intake filters being parts for ventilating, air-conditioning or refrigerating apparatus

42. Air intake hood for turbine inlet filter house

43. instantaneous intake air mass flow rate [kg/s]

44. The charged spray enters through the air intake valves at the beginning of the intake stroke.

45. Ha: absolute humidity of the intake air, g water per kg dry air

46. Ha = humidity of the intake air in g water per kg dry air

47. Dry to wet correction factor for the intake air

48. Vent door: movable panels used to regulate air intake.

49. Intake and exhaust valves for cylinder type air compressor

50. Passive vacuum cleaner nozzle with an air intake aperture

51. Intake and exhaust valves for a cylinder type air compressor.

52. R a= relative humidity of the intake air (per cent)

53. The relief valve (68) adjusts the air pressure of the air intake chamber (64).

54. Air distributor for an internal combustion engine and air intake system having an air distributor of this type

55. intake air mass flow rate on wet basis, kg/s

56. Air drawn into the intake is compressed by the compressor.

57. Mra = molecular mass of dry intake air (= 28.9 g/mol)

58. The intake and exhaust air lines are equipped with filters.

59. An air intake hood for channeling an incoming air flow downward in a filter house.

60. with Ha absolute humidity of the intake air, g of water per kg of dry air.

61. > 20 degr difference between measured and modelled intake air temperature

62. Air intake hose for air supply to the combustion part of the engine comprising at least:

63. Smoke released near outdoor air intakes will indicate whether air is being drawn into the intake.

64. The air supplementation pipe is provided with a third air intake port (C) and a first outlet.

65. Conduits for heating, cooling and air intake circuits and water for vehicles

66. The blower (0017) is disposed inside the air-flow intake hood channel.

67. Air is introduced into the combustion chamber via intake valves (17, 18).

68. High rise building with a stair well and a intake air shaft

69. is the molar mass of the dry intake air = 28.965 g/mol

70. Carbon dioxide levels at the air intake should be close to outdoor levels, otherwise exhaust is being brought into the intake.

71. with Ha absolute humidity of the intake air as g of water per kg of dry air

72. Oil filters, petrol filters and intake air filters for internal combustion engines

73. A rangehood or air-conditioning rangehood comprising a blower (0017) and an air-flow intake hood channel.

74. Aerophagia refers to the excessive intake of air into the digestive system

75. (3) Use the ambient temperature sensor or an intake air temperature sensor.

76. Intake air mixes with the exhaust gas downstream from the first valve.

77. The tightness of the intake system may be checked to ensure the carburation is not affected by an accidental intake of air."

78. The air moving device can draw a first portion of intake air from outside the explosion-proof enclosure.

79. The tightness of the intake system may be checked to ensure the carburation is not affected by an accidental intake of air

80. Air return partition boards (15) are arranged in the air return channel (22), corresponding to the air intake partition boards (11).