1. Air-conditioned chamber

2. Air chamber is connected to air through breather.

3. Glove with inflatable air chamber

4. Air passes into the chamber through air inlets 30.

5. Air curtain for urea mixing chamber

6. The air within the refrigerated chamber and air infiltrating into the refrigerated chamber(s) will typically contain moisture.

7. Venting and air-release valves (of the double-chamber and single-chamber kind)

8. ( 16 ) Air temperatures inside the heating chamber.

9. An inlet conduit connected to the expansion plenum chamber directs air to the expansion plenum chamber.

10. The wall of the air chamber (1) is perforated.

11. Boiler equipped with an air supply pre-heating chamber

12. The relief valve (68) adjusts the air pressure of the air intake chamber (64).

13. The opening connects the outer chamber with the air inlet.

14. A method and device at a single chamber air drier

15. air flow: the rate of air flow through the chamber should preferably be monitored continuously

16. Motor vehicle with a water chamber and an air conditioner

17. The ambient air mixes with the exhaust in the mixing chamber to produce mixed air.

18. Motor vehicle air-conditioning loop comprising a volume expansion chamber

19. Doors, door friezes, door frames, door casings, air chamber doors

20. The use of specially designed one-chamber or two-chamber air cushions (18) is provided in the invention.

21. Also, a built-in air pump flushes the chamber with filtered dry air, further reducing humidity.

22. In the air chamber (5) there is mounted an air-conditioning apparatus (10), preferably a heater.

23. Air flow rates, air flow rate/exposure port (nose-only), or animal load/chamber (whole-body).

24. A multi-chamber dryer using adjustable conditioned air flow is disclosed.

25. Instead of an air-to-air heat exchanger, this design uses a mixing chamber into which fresh air is injected.

26. Air classifiers, air dryers, air dust separators, hot gas generators, burners, combustion chamber jackets, and parts for the aforesaid goods

27. System and device for controlling air-conditioning equipment in a chamber

28. As air was pumped into the chamber, the pressure inside rose.

29. An exhaust port allows dried air out of the compression chamber.

30. Here, a silencer chamber (10) which is provided is partially or completely surrounded by a cooling air jacket chamber (20).

31. Pressure relief system of the air-chamber of the paraaortic counterpulsation pump

32. The sole air cushion is further provided with an exhaust chamber (03).

33. The pumping chamber displaces an approximate air volume of 100 cubic centimeters.

34. The combustion chamber (210) is configured to receive a lean air/fuel mixture therein to substantially fill the combustion chamber (210).

35. Air is introduced into the combustion chamber via intake valves (17, 18).

36. An abrasion-resistant skirt material (15) for use with air cushion vehicles having at least one air chamber.

37. A mixing chamber (M) in which exhaust gas and air are mixed homogeneously;

38. An airscrew on a shaft of engine drives air into a premix chamber.

39. a mixing chamber (M) in which exhaust gas and air are mixed homogeneously;

40. a mixing chamber (M), in which exhaust gas and air are mixed homogeneously;

41. Optimised combustion conditions include optimised combustion chamber design and optimised supply of air.

42. The chamber air mixing fan(s) must be switched on at this time.

43. A mixing chamber (M), in which exhaust gas and air are mixed homogeneously;

44. A mixing chamber (M), in which exhaust gas and air are mixed homogeneously

45. A mixing chamber (M) in which exhaust gas and air are mixed homogeneously

46. The plug (22) defines a valve for releasing pressurized air from the chamber.

47. Optimized combustion conditions include optimized combustion chamber design and optimized supply of air.

48. The chamber air mixing fan(s) shall be switched on at this time.

49. They work similarly to a piston in which air is pumped inside a chamber and pushed out of the other side of the chamber.

50. The chamber is sealed and a gas having known light absorption characteristics is injected into the chamber and mixed with the ambient air therein.

51. The lower chamber of the hull is a pressurized air compartment called a Ballonet

52. Space-age technology will be used to penetrate the chamber without introducing outside air.

53. 3.2.3.2. A mixing chamber (M), in which exhaust gas and air are mixed homogeneously.

54. Baritones have a smaller and more cylindrical bore (the internal air chamber) than euphoniums

55. Bubbling occurs in the water seal chamber when air is entering the chest drain

56. The sensor may also be exposed to the air inside the pressurized tire chamber.

57. This backing pad is the successor to the 15-hole air chamber backing pad.

58. For the comparison the absorbed dose was measured with the ionisation chamber in air.

59. 3.2.3.2. A mixing chamber (M), in which exhaust gas and air are mixed homogeneously;

60. 3.1.3.2. A mixing chamber (M) in which exhaust gas and air are mixed homogeneously;

61. 3.3.1.3. A mixing chamber (M) in which exhaust gas and air are mixed homogeneously.

62. A diesel engine (E) has a combustion chamber (C), a piston (T) movable in the chamber, air intake and exhaust valves (IV, EV), and a nozzle (N) injecting fuel into the combustion chamber.

63. A blower (D) discharges conditioned air into the distribution chamber (20) through the duct (30).

64. An exhaust fan (72) is disposed at the top of the air mixing chamber (71).

65. The body (1) is divided into an exhaust region (11) and a air chamber (12).

66. During the interruptions in the smoking process, the smoking chamber is ventilated with fresh air.

67. Both sides of the diaphragm are exposed to pressurised gas or air in the chamber.

68. Air or gas containing gas stripped from the liquid is withdrawn from the stripping chamber.

69. The auxiliary path compression chamber (P3) is provided with a second air intake port (B).

70. The blower chamber includes an exhaust port configured to communicate air out of the pump.

71. In one embodiment, a valve (75) controls the flow of exhaust air to the chamber.

72. The dryer includes an exhaust configured to vent exhaust air out of the drying chamber.

73. Air can escape from the piston chamber (2) into the environment in an intermediate position.

74. A stator side and a rotor side air channel (8, 17) open into said chamber.

75. A foraminuous partition, configured to encircle a portion of the cooking chamber, has a central portion and extremities mounted to divide the interior of the cabinet into a cooking chamber and an air heating chamber.

76. It is kept in the air-conditioned chamber for seven days, at an air temperature of + # ± # °C and a relative humidity of # ± # %

77. Air embolism is a serious life-threatening condition that requires immediate transport toward a decompression chamber.

78. A desiccant package for insertion into an integrated condenser dryer chamber of an air conditioning unit.

79. The top chamber is provided with temperature-controlled heated or cooled air at a regulated pressure.

80. The air flow should be adjusted to ensure that conditions throughout the exposure chamber are homogeneous