wheel centre distance in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: giao thông & vận tải
-cự ly tâm bánh xe

Sentence patterns related to "wheel centre distance"

1. "Wheel offset" means the distance from the hub abutment face to the centre

2. ‘Wheel offset’ means the distance from the hub abutment face to the centre line of the rim.

3. "Wheel offset" means the distance from the hub abutment face to the centre line of the rim."

4. Wheel offset means the distance from the hub abutment face to the centre line of the rim

5. "Wheel offset" means the distance from the hub abutment face to the centre line of the rim. "

6. ‘wheel off-set’ means the distance from the hub abutment face to the centre line of the rim;

7. 2.3.2. "Wheel offset" means the distance from the hub abutment face to the centre line of the rim.

8. In one revolution of a wheel, the distance covered by the wheel is equal to the Circumference of the wheel.

9. Wheel Backspace is the distance from the inside edge of a wheel to the mounting face

10. Wheel Backspacing is the distance in inches from the mounting surface to the inside edge of the wheel

11. Your accommodation is conveniently located within walking distance of the town centre.

12. 18 Focal length is the distance between optical centre and principal focus.

13. The difference can be explained quite simply: the wheel offset is the distance between the mounting surface and the center of the wheel, whereas the wheel Backspacing is the remaining distance from the mounting surface to the back of the wheel, so to calculate the Backspacing you just add the rim offset and half the wheel width.

14. Backspacing is the distance between the mounting pad and the back of the wheel

15. Backspacing is the distance between the mounting pad and the back of the wheel

16. Length where FY is the distance of the centre of flotation from Amidships.

17. "A near-infrared survey of Miras and the distance to the Galactic Centre".

“A gần hồng ngoại khảo sát Miras và khoảng cách đến Trung tâm Thiên hà”.

18. Backspace measures the distance from the mounting plate to the back edge of the wheel

19. Perpendicular distance between the vehicle front line of the bounding box and the front wheel axle.

20. Backspacing is the amount (usually measured in inches) of distance that the mounting surface of the wheel is away from the inner edge of the wheel

21. 24 Focal length: The distance between the centre of a lens and its principal focus.

22. The result indicates that the diameter of escape wheel addendum, center distance of escape wheel and pendulum have their significant influence on the timing of clock mechanism.

23. Bretzel is walking distance from the centre of the city and I would highly recommend it

24. Permitted intrusion of a wheel arch not extending beyond the vertical centre line of the side seat

25. Backspacing is the simply the distance from the bolt circle mounting surface to the inside of the wheel