wall thickness gaging in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: vật lý
-calip kiểu độ dày thành
-sự đo độ dày thành

Sentence patterns related to "wall thickness gaging"

1. Each offers a range of practical measurement features to solve a wide variety of thickness gaging problems.

2. Gaging and Measurement of Angularity

3. Coating and wall thickness gauges, adhesion testers, glossmeters and reflectometers.

4. Hornady Neck Wall Thickness Gauge …Thickness Gauge is a must-have accessory that complements the Hornady Concentricity Tool

5. Below a thickness limit, such walls wall may warp during peeling.

Bên dưới giới hạn độ dày, tường thành như vậy có thể cong trong khi bong tróc.

6. Our Borosilicate glass tubing has a wall thickness of 1mm to 1.2mm

7. The absolute cell wall thickness was clearly less related to wood density.

8. 1(5) Tubes and pipes of a wall-thickness not exceeding 4,5 mm.

9. As oppose to round plaingauge tubes which have a consistent wall thickness throughout its length, Butted tubes have variable wall

10. Different Acupuncturing points have been proposed for elimination of gaging

11. The amount of stress must be the maximum permissible stress in the following wall-thickness calculation

12. Normally the wall thickness shall be determined by calculation, accompanied, if needed, by experimental stress analysis

13. Normally the wall thickness shall be determined by calculation, accompanied, if needed, by experimental stress analysis.

14. Coring, locally eliminating material in these sections, is a way to pursue a uniform wall thickness

15. Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm, Filters, activated charcoal, Labware current sources, Power units, X-ray devices.

16. The rib thickness of at least one of the ribs having at least one angled side wall, as measured in the direction perpendicular to the side wall, can thereby be different from the thickness of the perpendicular ribs.

17. - the values actually measures for the outside diameter of the steel tube and for the wall thickness,

18. Specifically designed for use with ultrasonic flaw detection, thickness gaging, and acoustic emission instrumentation, our preamplifiers are a cost-effective solution in general applications requiring high gain/low-noise amplification of low amplitude ultrasonic signals.

19. Coarseness, generally defined as weight per unit length of fiber, depends on physical fiber attributes including fiber diameter, cell wall thickness, and cell wall density

20. the values actually measures for the outside diameter of the steel tube and for the wall thickness

21. - the values actually measured for the outside diameter of the steel tube and for the wall thickness,

22. — the values actually measures for the outside diameter of the steel tube and for the wall thickness,

23. NormallyWhenever possible the wall thickness shall be determined by calculation, accompanied, if needed, by experimental stress analysis.

24. the values actually measured for the outside diameter of the steel tube and for the wall thickness,

25. the values actually measured for the outside diameter of the steel tube and for the wall thickness