voltage selection switch in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: giao thông & vận tải
-công tắc lựa chọn điện áp

Sentence patterns related to "voltage selection switch"

1. Quad, low-voltage, SPST analog switch.

2. Selector shaft unit for an electrical switch, especially for a low voltage switch

3. The oscilloscope picture shows the plug voltage and the voltage across the mosfet switch.

4. Such adjustments apply a corresponding control voltage in the dimmer switch circuit, causing a small notch to appear in the output voltage from the dimmer switch.

5. The switch is further arranged to switch off before the rectified AC voltage starts to increase again.

6. The serial DRwC circuit can deal the serial power switch with static voltage-sharing, dynamic voltage-sharing and absorption of the bounce voltage.

7. 5 Roma table Grillo low-voltage tungsten halogen lamp with dimmer switch.

8. A plurality of conductors extend between the second selection switch stage and each of the selection switch stages, in excess of the number of ADCs in the system.

9. The switch operates to transfer current from the voltage source to the AC mains.

10. The evaluation circuit has a threshold value switch (10) which converts the voltage (U¿a?)

11. Protection circuits for the high voltage switch absorb energy from reactive components and clamp any overvoltages.

12. In a dc-dc converter with a given input voltage, the average output voltage is controlled by controlling the switch on and off durations (ton and toff).

13. It consists of a power switch bridge and a dynamic-static voltage-sharing absorption circuit (DRwC) bridge.

14. During the activation (35) of a switch, the contact-forming means (12) is temporarily supplied with voltage.

15. The activating element (1) has a cam (17), via which the under-voltage auxiliary switch is released.

16. Accordingly, a nanometer-scale mechanical switch with very high switching speed and low actuation voltage has been developed.

17. Electrical energy is capacitively accumulated with a charging circuit until a breakdown voltage of a switch is reached.

18. In the absence of a voltage applied to a control terminal of the MEMS switch, the MEMS switch is closed, thereby electrically coupling the input pad and the control node.

19. The transmitter includes a current source, a current direction selection block and a balance-switch block.

20. In addition, the cell balancing switch of the cell balancing circuit to be diagnosed is turned on to store a voltage value (hereinafter, "diagnosis voltage value") between nodes of a cell.

21. A method of connecting and disconnecting an ac voltage to/from a load, as well as a switch comprising a relay

22. Allx = 0.2A, AVO = 0.2V f-40kHz, Po=120W.D-0.4, N2/N1=0.5, N3/N1=1 (CCM mode) Show current and voltage of switch and diode Show current of Lx current Show output voltage.

23. Switch Access scans the items on your screen, highlighting each item in turn, until you make a selection.

24. Reed switch; Proximity sensor; Float Sensor; E-bike Brake Switch; Reed Relay; Flow Switch; Tilt Sensor Switch; Vibration Sensor Switch; Centrifugal Force Sensor Switch.

25. The voltage source could be a live wire, an energized piece of metal or other conductive material, a light switch, or an outlet