visual of shear in Vietnamese

@Chuyên ngành kỹ thuật
-góc cắt
-góc trượt
@Lĩnh vực: toán & tin
-góc trượt, góc cắt

Sentence patterns related to "visual of shear"

1. Shear algorithm

Thuật toán kéo cắt

2. Shear layer

3. Shear factor

4. Shear angle Y

5. Shear-jashub (3)

6. Shear angle X

7. Simultaneous shear and denaturation of nucleic acids

8. Using the shear resistance – shear displacement data from undrained monotonic ring shear tests and several processed horizontal earthquake accelerograms, the minimum peak earthquake acceleration necessary to cause a catastrophic shear failure under various seismic waveforms was estimated for conditions of no shear stress reversals on the sliding surface.

9. Shear Amazement, Kitchener, Ontario

10. The camber of the plate after cutting in disc type shear is reduced by adding hydraulic movable pusher in front of the shear and adjusting the side guide roller behind the shear.

11. Most frequent are visual field disorders followed by disorders of visual acuity and contrast sensitivity, visual adaptation, color and visual space perception as well as of visual recognition.

12. Shear tool plugin for digiKam

Bổ sung công cụ kéo cắt cho digiKamName

13. The amplitude of this normal stress is proportional to that of the oscillatory shear and the components in phase and 90‡ out of phase with the oscillatory shear prove to be odd functions of the steady shear rate.

14. Broadcasting or transmission of audio, visual and audio visual programmes

15. Hydrostatic shear inducing short dwell coater

16. Shear fatigue of the bracket-adhesive complex for 1,000 cycles revealed a variable, material-dependent influence on the shear strength of the bracket-adhesive complex.

17. With increasing displacement, rocks, which have undergone synthetic and/or Antithetic shear, pass into the zone of Antithetic shear and are deformed again

18. To Characterize the shear softening deformation of the grain contact: (5) τ = u s k si 1 + u s k si / τ S τ < c + σ n tanφ σ n tanφ when slipping where τ, u s, τ S, k si, c, and φ denote the shear stress, shear displacement, parameter controlling nonlinear shear deformation, initial shear stiffness, cohesion, and friction angle of the

19. 12 All shear stresses must vanish.

20. Strength (ucs) of carbonates using compressional and shear acoustic velocities

21. 17 The conditions of interruptable shear wall height are proposed.

22. Plugs, anchors, anchor screws, bolts, shear connectors

23. 15 A fluid cannot withstand a shear.

24. 14 All kinds of cold metal, salt, shear die manufacturing.

25. 13 Without loss of generality, shear deformations will be neglected.