tensile stress in Vietnamese

@Chuyên ngành kỹ thuật
-sức kéo
-ứng suất căng
-ứng suất kéo
@Lĩnh vực: xây dựng
-ứng suất chịu kéo

Sentence patterns related to "tensile stress"

1. Portable sander having novel abrasive sheet tensile stress

2. minimum elongation at fracture of the metal chosen under tensile stress in %.

3. As it only takes place under tensile stress, the plane of the Crazing …

4. A tensile stress opens the crack and pulls it through the slide resulting in fracture.

5. CBM sealed condition is bad under neutral plane at axial part where shows tensile stress in syncline structure.

6. Tensile stress from the adductor muscles is held to be responsible for the formation of the bone-blade described as linea alba.

7. Small probes of added shearing stress appeared to cause considerably more accumulated strain-hardening damage to a yield curve than small probes of added tensile stress.

8. *Crevasse* *1.* Deep fissure in the surface of a glacier, caused when tensile stress overcomes the shear strength of ice in the brittle upper few metres

9. The compressive surface stress is tough in the glass because any bending load has to overcome quenched compressive stress before there's a net tensile stress on the surface.

10. However, the activation energy of Cementite precipitation decreases from 179.4 kJ/mol to 94.7 kJ/mol, proving that tensile stress could reduce the energy barrier of Cementite precipitation

11. Method for adjusting a tensile stress of a strip, control and/or regulation device, storage medium, program code for carrying out said method, and industrial plant for processing strips

12. The folds of the loops (3) do not protrude from the anchor sleeve (1) towards the front, thus preventing the loops (3) from being torn off at the folds thereof when the anchored anchor sleeve (1) is subjected to tensile stress.

13. The yield criterion of the oriented material over the whole plastic range is shown to be one of limiting shear energy on particular crystallographic shear systems and this enables the tensile stress-strain relation of the random polycrystalline aggregate to be derived.

14. Jointless, curved trusses also show tensile stresses or compressive stresses perpendicular to the grain, depending on the stress distribution The test results of the respective specimens give indication as to the suitability of the admissible tensile stress of 2.5 kp/cm2 specified in the draft of DIN 1052.