temperature of cooling medium in Vietnamese

@Chuyên ngành kỹ thuật
-nhiệt độ môi chất lạnh
@Lĩnh vực: điện lạnh
-nhiệt độ chất làm lạnh

Sentence patterns related to "temperature of cooling medium"

1. The temperature of the cooling air shall be the ambient temperature

2. The temperature of the cooling air shall be the ambient temperature.

3. Engine cooling temperature, K (2)

4. Air Cooling uses the case’s air as the primary Cooling medium

5. Determination of a surface temperature of a cooling body

6. CPA #.#.#: Pumps for fuel, lubricants, cooling-medium and concrete

7. Depletion of the medium or of nutrients, low temperature.

8. Air cooling: reference point:Maximum temperature at reference point: ... K4.1.15.3.

9. Individual temperature-control of aircraft cabin regions by heating and evaporative cooling

10. Cooling Obviously AAS 99 C can debase indoor temperature effectively.

11. In part 1, a plant is investigated with a ratio between low- and medium-temperature refrigeration capacity of 0.2 and CO2 cooling via the ambient air as far as possible.

12. Adsorption chiller for the production of cooling power from low temperature hot water

13. The influence of heating temperature, forging-ending temperature and cooling speed on the mechanical properties of untempered 45V steel is investigated.

14. A cooling device comprising a knob providing the adjustment of the compartment temperature

15. The cooling air may be preheated to a temperature that is higher than an expected ambient temperature.

16. In part 2, a plant is investigated with a ratio between low- and medium-temperature refrigeration capacity of 0.2 and of 0.4, and limited or no CO2 cooling the ambient air.

17. Local Smart Cooling Smart Cooling is a type of datacenter Cooling that monitors specific areas within the facility and adjusts the temperature locally rather than the entire room

18. 6 synonyms for Chilling: cooling, temperature reduction, scarey, scary, shuddery, shivery

19. The present invention relates to laser devices with increased cooling capability by means of largely extended cooling surfaces contacting the laser active medium.

20. Method and device for separating a neutron absorber from a cooling medium

21. Figure 6.2 Stability is linked to the temperature aloft and adiabatic cooling.

22. Temperature lowering achieved by any other means may also be called Cooling

23. The heated temperature, the final forging temperature and the cooling speed are the important factors which influence the performance of untempered steel.

24. Many refrigerant options are available; when selecting a Chiller, the application, cooling temperature requirements, and refrigerant's cooling characteristics need to match.

25. Cooling is removal of heat, usually resulting in a lower temperature and/or phase change