sheet-metal waterproofing in Vietnamese
@Chuyên ngành kỹ thuật
@Lĩnh vực: xây dựng
-tấm cách nước (bằng) kim loại
Sentence patterns related to "sheet-metal waterproofing"
1. Coatings, not of metal, for waterproofing and/or damp-proofing (construction)
2. Glass paper, sandpaper, abrasive sheet metal, metal covered with an abrasive coating, metal sheet covered with an abrasive coating
3. Metal guard rails, sheet piling
4. Pre-painted sheet metal, namely, corrosion-resistant sheet metal pre-painted to simulate naturally weathered steel
5. Wall boards (not of metal) sheet piles (not of metal)
6. The second sheet metal angle (3) is excited through radiation coupling by the first sheet metal angle (2).
7. Chutes of metal, security grilles of metal, pre-fabricated ditches of sheet metal
8. Walls and sheet piling, not of metal
9. Atlas Blowpipe & Sheet Metal Works INC
10. Find Aluminum sheet metal at Lowe's today
11. Printing machines for use on sheet metal
12. Bending sheet metal by hand is a manageable task if the piece of sheet metal is small and thin enough to handle
13. Sheet Metal Work & Welded Part: Bus Chassis, Welded Frame...
14. He hammered out the dents in the metal sheet.
15. Sheet metal bands of zinc, copper, stainless steel, aluminium
16. Light metal profile with integrated base sheet metal for producing an acoustically optimized diffraction edge
17. Adapter plates, sheet metal parts of aluminium and stainless steel
18. Causes of Sharp Edges and Burrs on Sheet Metal Parts
19. The sheet metal Bending height should be at least 2 times the thickness of the sheet metal plus the Bending radius, that is, H ≥ 2t + R.
20. Wide choice of plastic, stainless steel, aluminium or whitevarnished sheet metal.
21. Bending is one of the most common sheet metal fabrication operations
22. Bucking bars are essential for riveting and aircraft sheet metal maintenance
23. Metal Crimpers crimp, fold, seam, or flatten sheet metal, deforming metal to hold itself or become a needed shape for an application
24. The height of the sliding metal sheet (3) may be adjusted in that the metal sheet is a steel strip whose bottom end is wound around a drum (18).
25. All suitable for coating aluminium sheetings, galvanised steel sheet and for coating metal doors and metal window frames