shaped-chamber manometer in Vietnamese

@Chuyên ngành kỹ thuật
-áp kế có định dạng

Sentence patterns related to "shaped-chamber manometer"

Below are sample sentences containing the word "shaped-chamber manometer" from the English - Vietnamese Dictionary. We can refer to these sentence patterns for sentences in case of finding sample sentences with the word "shaped-chamber manometer", or refer to the context using the word "shaped-chamber manometer" in the English - Vietnamese Dictionary.

1. Tracked blood pressure manometer

2. Blood pressure manometer

3. The pressure measured by a manometer.

4. A manometer shall be used to monitor this pressure

5. An inclined manometer for measuring differential pressures.

6. The pressure shall be measured with an inclined manometer.

7. The pressure shall be measured with an inclined manometer

8. The needle has a lateral hole that transmits pressure to the manometer

9. Alternatively, a closed, channel shaped steam chamber may be inserted into the path of the spools, thus permitting continuous humidification.

10. The needle has a lateral hole which conveys the pressure to the manometer.

11. The needle has a lateral hole that transmits pressure to the manometer.

12. In addition, at the valve there is a pressure manometer attached.

13. A manometer shall be fitted between the meter and the pressure maintenance valve

14. When a manometer is used to measure the overpressure or the vacuum pressure,

15. (Filter filter before and after the manometer pressure difference must be measured.

16. The cuff pressure release valve was interposed between the cuff manometer and the pilot balloon.

17. The masonry Cistern chamber could be shaped like a vault, bell, beehive, jug or flat-topped with a wooden platform for the cover

18. The zone of permissible pressures shall be shown on the dial of the manometer

19. Such systems shall incorporate a manometer which indicates the pressure inside the tank

20. Measuring pressure or flow in microfluidic device with capacitance manometer(s) (inkjet clogging)

21. A manometer shall be fitted between the meter and the pressure maintenance valve.

22. The core of the Cyclotron is the chamber: two metal canisters shaped like the letter “D,” placed back to back to make a circle

23. Such systems shall incorporate a manometer which indicates the pressure inside the tank.

24. When a manometer is used to measure the overpressure or the vacuum pressure

25. Ancistroid = hook-shaped, Arytenoid = ladle-shaped, Buccinal = trumpet-shaped