resistance to lateral bending in Vietnamese

@Chuyên ngành kỹ thuật
-độ ổn định uốn dọc
@Lĩnh vực: xây dựng
-độ bền uốn dọc
@Lĩnh vực: cơ khí & công trình
-sức bền uốn dọc

Sentence patterns related to "resistance to lateral bending"

1. Points 4.5.1. (Strength test), 4.5.2. (Resistance to buckling) and 4.5.3. (Resistance to bending moment) only.

2. Arrangement for adjusting the bending resistance of an instrument arm

3. Other times, lateral Crookedness of the spinal column with twisting (scoliosis) or lateral bending of the spinal column (kyphosis) is …

4. The main Buckling mode is the lateral deflection as in the side bending.

5. Aluminum alloy extrudate with excellent bending crushing strength and corrosion resistance

6. The board has markedly improved bending strength and resistance to pulling out of screws and nails.

7. The corresponding lateral deflection is determined using summation of its flexibility sources of bending, shear and slip.

8. Very good adhesion to all metals with high resistance values for compressive, ten-sile, bending strengths, wear & tear.

9. Bending synonyms, Bending pronunciation, Bending translation, English dictionary definition of Bending

10. Key words: penetrometer test, piles, bearing capacity, cohesive soils, point resistance, lateral friction, steel, concrete, wood.

11. Accordingly, the nano-hole electrode shows a very low change in electrical resistance during a bending fatigue test.

12. In it, the loads are acting transversely to the longitudinal axis, which produces the shear forces and bending moment.The lateral load acting on Beams are the main

13. Bending tool assembly for determining the bending angle

14. Ancon Masonry Reinforcement, otherwise known as Bed Joint-Reinforcement, improves the structural performance of masonry walls by providing additional resistance to lateral loads e.g

15. In this paper, problems of bending of thin plates under the combined action of lateral loading and in-plane forces are studied by means of perturbation method.

16. The Alicyclic groups in curing agent b make the cured epoxy resin b have high rigidity, but with bad bending ability and impacting resistance

17. Description: Schott AS 87 eco is an ultra-thin Aluminosilicate glass with extremely high levels of bending and impact strength and superior scratch resistance

18. Air Bending Combat: Air Bending is known for being almost entirely defensive, however it is reputed to be the most dynamic of the four Bending Arts

19. Bending angle measuring apparatus and method for measuring a bending angle by means of the bending angle measuring apparatus

20. Barrettes provide resistance to horizontal stress and to bending moments better than circular piles of the same section, so that one single pile is sufficient under each column or bearing element

21. The sailors are bending to the oars.

22. Adequate correlation exists between bending MOE and bending strength with moisture content.

23. The Bending Iron maintains an even, thermostat-controlled heat for Bending wood

24. Bending results from a couple, or a Bending moment M, that is applied

25. 2" to 6" Bending Plug Kit