rack and pinion drive in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: hóa học & vật liệu
-điều khiển bằng bánh khía thanh răng

Sentence patterns related to "rack and pinion drive"

1. Rack and pinion sieve adjustment mechanism

2. Rack and pinion mechanism, accessor, and magnetic tape device

3. Rack mounting auxiliary adjusting apparatus used for rack and pinion climbing vertical ship lift

4. End play in drive pinion bearings.

5. Rack and pinion steering gear with automatic adjustment of the thrust element

6. Usually, we adopt pinion drive for large mills.

7. Refer to Drive Pinion Bearing Pre - Load Adjustment.

8. Worn teeth on ring gear or drive pinion gear.

9. Bearing for a drive pinion shaft, especially an all-wheel front-axle transmission

10. The mounting plate comprises an interface adapted to be Circumjacently mounted about the differential drive pinion gear, and a torque arm bracket integral with the interface and spaced apart from the differential drive pinion gear

11. The clutch disk allows the pinion gear to move with the rack when the mirror is manually adjusted.

12. A pinion is carried by the trigger lever for engagement with a rack carried by the actuator rod.

13. The mechanical components for swiveling and the rack for shifting (adjusting interpupilary distance) of the left tube. The shaft with the pinion drives another rack on the rear side to ensure constant movement.

14. The Mount Washington Cog Railway, also known as the Cog, is the world's first mountain-climbing Cog railway (rack-and-pinion railway)

15. The energy-saving Varioserv adjustable vane pump and steering column, Servotronic rack-and-pinion power steering and Dynamic Steering are provided by ZF Lenksysteme.

16. The drive for the door leaf of a conventional door further comprises a drive motor (11) that is actively connected to the pinion shaft (104).

17. Numerous 6L6s and 6V6s served as line drivers to drive pulses through cables between rack assemblies.

18. To install the rack (6) on the sliding door (1), the pinion (7) can be placed into an adjustment position located below the working position.

19. The mounting plate comprises an interface adapted to be Circumjacently mounted about the differential drive pinion gear, and a torque arm bracket integral with the interface and …

20. Pinion angle level gauges

21. The distance between the object and a lens (6, 111) of the eyepiece can be adjusted in the deployed configuration, for example by way of a rack and pinion assembly (15, 17, 108, 109).

22. Install pinion front bearing, if necessary.

23. Check ring gear and pinion gear teeth contact pattern.

24. The Culdee Fell Railway, a narrow-gauge rack-and-pinion mountain railway, runs from the summit of Culdee Fell down to Kirk Machan where it links to the standard-gauge line from Kildane to Peel Godred

25. Dishwasher and adjustable rack