quasi-peak level in Vietnamese

@Chuyên ngành kỹ thuật
@Lĩnh vực: điện tử & viễn thông
-mức của chuẩn đỉnh

Sentence patterns related to "quasi-peak level"

1. the peak level of single accelerating vehicle events.

2. The equation of the peak current for a quasi- reversible interfacial reaction in oscillopolarography was discussed. The equation has been verified.

3. Gasoline prices are 14% below the peak level they hit in November.

4. The antenna is substantially aligned when the signal strength reaches a peak level.

5. Heat acclimatization lowered the level of the second peak , though it was remarkably prolonged.

6. Elevation ranges from sea level to 1,168 m (3,832 ft) on El Toldo Peak.

Độ cao dao động từ mực nước biển đến 1.168 m (3.832 ft) tại đỉnh El Toldo.

7. Chlordiazepoxide is slowly absorbed and may take several hours to reach a peak plasma level

8. 16 The spectrum level of microseismic noise tends to peak at about 1 / 6 Hz.

9. The highest peak in this range is about 10,000 feet [3,000 m] above sea level.

10. Kita-dake is Sakurajima's highest peak, rising to 1,117 m (3,665 ft) above sea level.

Kita-dake là đỉnh cao nhất của Sakurajima, cao 1.117 m (3.665 ft) so với mực nước biển.

11. The peak of the highest mountain in Pinghe County (Mount Daqin) is #,# metres above sea level

12. 17 The peak level is above normal, and fasting levels may or may not be elevated.

13. Peak power = (peak potential in volts) × (peak beam current in amperes).

14. ‧Peak power‧ = (peak potential in volts) × (peak beam current in amperes).

15. Peak power» = (peak potential in volts) × (peak beam current in amperes).

16. Any algebraic extension of a quasi-algebraically closed field is quasi-algebraically closed.

17. “Peak power” = (peak potential in volts) × (peak beam current in amperes).

18. 'Peak power' = (peak potential in volts) x (peak beam current in amperes).

19. ‘Peak power’ = (peak potential in volts) x (peak beam current in amperes).

20. ‘Peak power’ = (peak potential in volts) × (peak beam current in amperes).

21. "Peak power" = (peak potential in volts) × (peak beam current in amperes).

22. 'Peak power' = (peak potential in volts) × (peak beam current in amperes).

23. [Peak power = (peak potential in volts) x (peak beam current in amperes).]

24. Auteciously autoeciously facetiously half-ingeniously half-rebelliously half-seriously nonabstemiously nonadventitiously nonfacetiously nonsacrilegiously overabstemiously pancreaticoduodenostomy pareciously paroeciously pseudosacrilegiously quasi-conscientiously quasi-enviously quasi-mysteriously

25. Peak power = (peak potential in volts) x (peak beam current in amperes).